Toyspeed.org.nz Message Board

by **flying_wedge** » Fri Jan 27, 2012 7:51 am

Might be an obvious answer to this question, but it pays to check

I have a C52 with an lsd, and a C60 open diff. Being the same gearbox code, could I swap the lsd from the C52 to the C60?
What are tolerances on diffs with power? Current C52 dealing with ~160 engine hp, will be facing ~210 hp in C60.

Cheers

by **thegreatestben** » Fri Jan 27, 2012 9:24 pm

Had a c52 open diff in the 7agte adub. She'll be right

by **CXGPWR** » Sat Jan 28, 2012 1:35 am

Had a C56 in my fxgt, had 230whp 4agte, held up mint and was only a shitty torsen lsd but that took a hammering

by **crispy'86** » Sat Jan 28, 2012 8:44 am

C60 or 160 6 speed out of ae111 levin/trueno??

I thought (and don't quote me) the lsd unit would work but the crown wheel is narrower on the 6 speeds?? It has been a while since i stripped the gearbox in a customers 6 speed bzr trueno that popped the gearbox.

by **GTTpower** » Sat Jan 28, 2012 9:13 am

C60 is out of ZZE123 Corolla's, much stronger unit. Can you actually swap the bellhousing to accept an A engine?

by **flying_wedge** » Sat Jan 28, 2012 12:57 pm

Its a c60 6 speed, not c160. For a 2zz.
Have lsd for a c52, and I would be keen to know if this would fit the c60 box. Many years between them I know, but same gearbox code ...

by **crispy'86** » Sat Jan 28, 2012 12:58 pm

I've wondered this too as our corolla fielder has the 1zzfe and C52 5 speed so........ would it just be a straight bolt up to the block or do you have to strip the box to fit the A bolt pattern

Toyspeed.org.nz Message Board

C52 ... C60 ... lsd

C52 ... C60 ... lsd

Who is online