coilovers 4 levins???
Moderator: The Mod Squad
- levinwreck
- Toyspeed Member
- Posts: 107
- Joined: Tue Dec 30, 2003 12:21 pm
- Location: Rotorua
coilovers 4 levins???
i want to upgrade my suspension cos the standard shit is kinda buggered. i have king springs and thought about getting new shocks. but i was woundering how much a coilover kit would cost and where can i get one from. also do you need a cert if you get custon shocks/struts??
Ae92 Toyota Trueno GT-Z - STILL GOING
Ae101 Toyota Levin 20V - GONE
78 Lancer - 2BWLAGE
Ae101 Toyota Levin 20V - GONE
78 Lancer - 2BWLAGE
yea you will need a cert
and adjustables will cost you alot of money, the cheapest/best set i found new are 2000 from sas suspension. they can adjust where the spring and the platform meet, and also where the shock bolts onto the hub can be adjusted down to allow for more travel when the car is very low.
but as i said new adjustables are expensive and all adjustables need a cert ($350)
and adjustables will cost you alot of money, the cheapest/best set i found new are 2000 from sas suspension. they can adjust where the spring and the platform meet, and also where the shock bolts onto the hub can be adjusted down to allow for more travel when the car is very low.
but as i said new adjustables are expensive and all adjustables need a cert ($350)
1996 AE111 Toyota Levin BZ-G - 15.1 @ 146km
http://toyspeed.blakjak.net/profiles/profile.php?id=301
http://toyspeed.blakjak.net/profiles/profile.php?id=301
or if u dont want to spend all tha tmoney and keep your king springs just buy shocks that fit your car that have adjustable hardneses.
GAB make them for ae series, monroe, koni and many more, think it's a bit cheaper that way and you wont need a cert.
GAB make them for ae series, monroe, koni and many more, think it's a bit cheaper that way and you wont need a cert.
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
- levinwreck
- Toyspeed Member
- Posts: 107
- Joined: Tue Dec 30, 2003 12:21 pm
- Location: Rotorua
I presume your car is a gtz levin.
For the front of the car you can either buy ones that slot in or buy ones that are made with the whole strut.
For the rear you have to buy ones made with the whole strut on it.
No cert needed for adjustable stiffness. Only for height.
For the front of the car you can either buy ones that slot in or buy ones that are made with the whole strut.
For the rear you have to buy ones made with the whole strut on it.
No cert needed for adjustable stiffness. Only for height.
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|