Silvertop plenum....

AceSniper · Post by **AceSniper** » Thu Sep 16, 2004 4:39 pm

Just woundering what that tube coming out of the bottom left side does....
Anyone know?
thanks

10k 20v · Post by **10k 20v** » Thu Sep 16, 2004 6:37 pm

the one that runs to the rack? or the firewall

AceSniper · Post by **AceSniper** » Thu Sep 16, 2004 7:24 pm

not sure goes under the plenum I think.... Its hard to notice unless ur trying to pull the bottom half of the plenum out an this (about 10mm) pipe is pushed onto the left side

Loudtoy · Post by **Loudtoy** » Thu Sep 16, 2004 8:38 pm

AceSniper wrote:not sure goes under the plenum I think.... Its hard to notice unless ur trying to pull the bottom half of the plenum out an this (about 10mm) pipe is pushed onto the left side

Power steering vacume line from what i can remember! Don't forget to put it back on after you've finished doing what ever your doing with the plenum chamber as it probably won't be very fin to drive without it on

AceSniper · Post by **AceSniper** » Thu Sep 16, 2004 8:54 pm

Thanks

Nar havent pulled it off... just seen it an wondered what its for :roll:

10k 20v · Post by **10k 20v** » Fri Sep 17, 2004 5:52 pm

Thats the idle up for the p/steer.
That hose runs down to the rack onto a valve then from the valve on the rack to the vaccum side of the throttle bodies.