Silvertop plenum....

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Silvertop plenum....

Postby AceSniper » Thu Sep 16, 2004 5:39 pm

Just woundering what that tube coming out of the bottom left side does....
Anyone know?
thanks
User avatar
AceSniper
Toyspeed Member
 
Posts: 2002
Joined: Sun Aug 04, 2002 10:55 am
Location: Hamilton

Postby 10k 20v » Thu Sep 16, 2004 7:37 pm

the one that runs to the rack? or the firewall
Image
User avatar
10k 20v
Toyspeed Member
 
Posts: 959
Joined: Fri Oct 31, 2003 6:32 pm
Location: PUKEKOHE

Postby AceSniper » Thu Sep 16, 2004 8:24 pm

not sure goes under the plenum I think.... Its hard to notice unless ur trying to pull the bottom half of the plenum out an this (about 10mm) pipe is pushed onto the left side
User avatar
AceSniper
Toyspeed Member
 
Posts: 2002
Joined: Sun Aug 04, 2002 10:55 am
Location: Hamilton

Postby Loudtoy » Thu Sep 16, 2004 9:38 pm

AceSniper wrote:not sure goes under the plenum I think.... Its hard to notice unless ur trying to pull the bottom half of the plenum out an this (about 10mm) pipe is pushed onto the left side


Power steering vacume line from what i can remember! Don't forget to put it back on after you've finished doing what ever your doing with the plenum chamber as it probably won't be very fin to drive without it on :?
TS Member sine 2001

Prado To tow stuff with
NZ Ae82 GT Liftback for gravel fun
Rodeo to do work stuff in
Big Ass Trailer to put stuff on
Car no 16 in a long line of less than ilustrious automobiles
User avatar
Loudtoy
Toyspeed Member
 
Posts: 1833
Joined: Tue Jun 04, 2002 9:26 pm
Location: In a ditch, watch for triangle!!

Postby AceSniper » Thu Sep 16, 2004 9:54 pm

Thanks :)

Nar havent pulled it off... just seen it an wondered what its for :roll:
User avatar
AceSniper
Toyspeed Member
 
Posts: 2002
Joined: Sun Aug 04, 2002 10:55 am
Location: Hamilton

Postby 10k 20v » Fri Sep 17, 2004 6:52 pm

Thats the idle up for the p/steer.
That hose runs down to the rack onto a valve then from the valve on the rack to the vaccum side of the throttle bodies.
Image
User avatar
10k 20v
Toyspeed Member
 
Posts: 959
Joined: Fri Oct 31, 2003 6:32 pm
Location: PUKEKOHE


Return to Tech Questions

Who is online

Users browsing this forum: Bing [Bot] and 40 guests