VVT pullys

[Mr Revhead]

blacktop cams an pullys $110

price on toyota parts guys face.. priceless

aslong as the pulley is ok, they fail on the blacktops aswell

fyi the hydroo tensioners ont he black are prone to failure as well... ALWAYS replace when doing cambelt

[10k 20v]

matt dunn,

the marks on the pulleys are the same so you would fit as tho fitting the original cam pulleys as the wheels and cams are indexed correclty for their applicaton.
ie: silvertop cams and silvertop pulleys, blacktop cams and black top pulleys,
dosen't matter what head you fit them too, the "missing" tooth is on the non drive side were the tensioner.

[matt dunn]

matt dunn,

the marks on the pulleys are the same so you would fit as tho fitting the original cam pulleys as the wheels and cams are indexed correclty for their applicaton.
ie: silvertop cams and silvertop pulleys, blacktop cams and black top pulleys,
dosen't matter what head you fit them too, the "missing" tooth is on the non drive side were the tensioner.

Cam Timings - (AE1O1)
..............................Inlet Cam...IVO BTDC...IVC ABDC.........Lift (mm)
VVT <4400rpm..........................0°...............70°..................7.97
VVT >4400rpm..........................30°.............40°...........
Exhaust Cam............................EVO BBDC......EVC ATDC......Lift
...............................................54°.................16°................7.6


Cam Timings - (AE111)
.....................................Inlet Cam....IVO BTDC...IVC ABDC....Lift (mm)
VVT <4400rpm.................................5°................65°.............8.2
VVT >4400rpm.................................35°...............35°
..............................Exhaust Cam EVO BBDC EVC ATDC Lift
......................................................54°...............16°............7.6


see if this works,

So they both alter by 30°,
but the blacktop starts 5° advanced to begin with.
Wheater it's the cam that's more advanced or the Pulley that's more advanced, I do not know.

Matt

[20v FX-GT]

oh btw a new silvertop vvt pulley is about $190

How much for a blacktop?

[Spannergal]

oh btw a new silvertop vvt pulley is about $190

How much for a blacktop?

think that someone said $110. Mr Revhead's probably not really able to give you a price from Aus