blacktop cams an pullys $110
price on toyota parts guys face.. priceless
aslong as the pulley is ok, they fail on the blacktops aswell
fyi the hydroo tensioners ont he black are prone to failure as well... ALWAYS replace when doing cambelt
VVT pullys
Moderator: The Mod Squad
25 posts
• Page 2 of 2 • 1, 2
by Mr Revhead » Wed Mar 02, 2005 7:23 pm
price on toyota parts guys face.. priceless
aslong as the pulley is ok, they fail on the blacktops aswell
fyi the hydroo tensioners ont he black are prone to failure as well... ALWAYS replace when doing cambelt
-
Mr Revhead - SECURITY!
- Posts: 24635
- Joined: Tue Jan 20, 2004 4:06 pm
- Location: Nelson
by 10k 20v » Wed Mar 02, 2005 7:31 pm
matt dunn,
the marks on the pulleys are the same so you would fit as tho fitting the original cam pulleys as the wheels and cams are indexed correclty for their applicaton.
ie: silvertop cams and silvertop pulleys, blacktop cams and black top pulleys,
dosen't matter what head you fit them too, the "missing" tooth is on the non drive side were the tensioner.
the marks on the pulleys are the same so you would fit as tho fitting the original cam pulleys as the wheels and cams are indexed correclty for their applicaton.
ie: silvertop cams and silvertop pulleys, blacktop cams and black top pulleys,
dosen't matter what head you fit them too, the "missing" tooth is on the non drive side were the tensioner.
-
10k 20v - Toyspeed Member
- Posts: 959
- Joined: Fri Oct 31, 2003 6:32 pm
- Location: PUKEKOHE
by matt dunn » Wed Mar 02, 2005 10:35 pm
10k 20v wrote:matt dunn,
the marks on the pulleys are the same so you would fit as tho fitting the original cam pulleys as the wheels and cams are indexed correclty for their applicaton.
ie: silvertop cams and silvertop pulleys, blacktop cams and black top pulleys,
dosen't matter what head you fit them too, the "missing" tooth is on the non drive side were the tensioner.
Cam Timings - (AE1O1)
..............................Inlet Cam...IVO BTDC...IVC ABDC.........Lift (mm)
VVT <4400rpm..........................0°...............70°..................7.97
VVT >4400rpm..........................30°.............40°...........
Exhaust Cam............................EVO BBDC......EVC ATDC......Lift
...............................................54°.................16°................7.6
Cam Timings - (AE111)
.....................................Inlet Cam....IVO BTDC...IVC ABDC....Lift (mm)
VVT <4400rpm.................................5°................65°.............8.2
VVT >4400rpm.................................35°...............35°
..............................Exhaust Cam EVO BBDC EVC ATDC Lift
......................................................54°...............16°............7.6
see if this works,
So they both alter by 30°,
but the blacktop starts 5° advanced to begin with.
Wheater it's the cam that's more advanced or the Pulley that's more advanced, I do not know.
Matt
- matt dunn
- Toyspeed Member
- Posts: 7109
- Joined: Fri Sep 12, 2003 1:01 am
- Location: Timaru
by 20v FX-GT » Thu Mar 03, 2005 1:13 pm
Mr Revhead wrote:oh btw a new silvertop vvt pulley is about $190
How much for a blacktop?
1981 & 1982 MK1 VW Golf GTI 8v
1997 AE111 Toyota Trueno 6 Speed
My profile l AE101 FX GT Site l AE111 BZ Site l
1997 AE111 Toyota Trueno 6 Speed
My profile l AE101 FX GT Site l AE111 BZ Site l
-
20v FX-GT - Toyspeed Member
- Posts: 601
- Joined: Tue May 06, 2003 1:20 am
- Location: Hawkes Bay
by Spannergal » Thu Mar 03, 2005 1:15 pm
20v FX-GT wrote:Mr Revhead wrote:oh btw a new silvertop vvt pulley is about $190
How much for a blacktop?
think that someone said $110. Mr Revhead's probably not really able to give you a price from Aus
- Spannergal
- Toyspeed Member
- Posts: 829
- Joined: Sun Dec 21, 2003 5:44 pm
- Location: Wellington
25 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 47 guests