How do I calculate required injector flow rates?

[ChaosAD]

Is there a formula to work out what size injectors are required for X horsepower? I need some injectors for a 16v 4age capable of handling 180Hp.
Would my ae82 fxgt fuelpump be up to the task? or would I also need a replacement Fuelpump?

[Lloyd]

I've got some GTZ ones for sale just incase you discover they are about what you need

[ChaosAD]

I think they will be a bit big. gtz injectors are around the 390 mark.
I was thinking that the 290ish 20v injectors would be a good size as they supposedly make 160Hp standard. So maybe something that size but top feed.

[the fallen303]

290cc injectors should flow enough for around 200hp at the engine using the formula i have here. can't remember where i got it from, think an old performance car, or fast fours, something along those lines. put it into excel, so i use it through there.

[ChaosAD]

Cheers. What engines have top feed 290ish injectors in them?

[ChaosAD]

http://www.meggala.com/injectors.htm
Would the skyline rb20det flow enough?

[unit-Equip]

I think they will be a bit big. gtz injectors are around the 390 mark.
I was thinking that the 290ish 20v injectors would be a good size as they supposedly make 160Hp standard. So maybe something that size but top feed.

Starlet turbo (ep82 or ep91) : 295cc/min @ 13.8ohms and top feed. I always understood 4A-GZE to be a low impedence 365cc top feed unit. Sold some the other week to Braided Lines in Australia for their turbo'd 4EFE starlet running TD04L rex 'charger.

Cheers,

Paul.

[ChaosAD]

Thanks. So its either rb20 or 4afte injectors.
What about the fuel pump? it only runs 180ish injectors standard.
Should I get a 20v levin one?

[unit-Equip]

Thanks. So its either rb20 or 4afte injectors.
What about the fuel pump? it only runs 180ish injectors standard.
Should I get a 20v levin one?

Starlet uses a 4E-FTE. (E series engine).

Cheers,

Paul.

[ChaosAD]

sorry. meant to say 'RB20DET or 4efte injectors'.
So does anyone know about the pump?