A few ae92 Qs

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

A few ae92 Qs

Postby Caveman » Wed Jun 01, 2005 4:41 pm

When removing the spoiler there are two nuts which you cannot access.

Image

This view is looking down on the spoiler

How do you get these off?

Also where do you people run wires through the firewall. On my last car I ran it through the same hole as the loom but on my ae92 its a little harder to access. The wire is 12mm total.
AW11 Track Toy
Formerly known as 1998
User avatar
Caveman
Toyspeed Member
 
Posts: 1918
Joined: Sun Sep 12, 2004 11:20 am
Location: West Auckland

Postby Ae92typeX » Wed Jun 01, 2005 5:29 pm

On my ae92 levin the two you marked for the spoiler were actually ball clips, not bolts- a big pull and it came off.
I ran most wires through the big loom grommet on the passenger side wheel arch. once you take off the plastic wheel well cover its easy to see and get to.
I ran about the same size through for my amp.
Cant believe im still a member here.

http://toyspeed.blakjak.net/profiles/profile.php?id=113
User avatar
Ae92typeX
Toyspeed Member
 
Posts: 2639
Joined: Fri May 17, 2002 11:00 pm
Location: North Shore

Postby Lloyd » Wed Jun 01, 2005 7:48 pm

Pretty sure if you look hard enough you'll see where you can get to the nuts under the spoiler. Might be a bung or something over the hole to get at them.

As for the wire, just use the one for the loom from the ECU. I've managed to get 2 runs of 4ga wire through without too much trouble.
User avatar
Lloyd
** Moderator **
 
Posts: 6195
Joined: Tue Oct 15, 2002 1:50 pm
Location: Dunedin

Postby Bazda » Wed Jun 01, 2005 8:44 pm

for the spolier its just a ball clip thing, just pull harder and it will come off or stick a screwdriver with some cloth over it to lever it off.

as for running wires through, I can most of mine through where the speedo cable goes through and the heater cable. You just take the gromet out and cut the centre hole out bigger.
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Postby Caveman » Wed Jun 01, 2005 11:11 pm

Thanks for the imput.

The wire is to relocate the battery.

The spoiler is for looks... cos the foctory one is uhg :?
AW11 Track Toy
Formerly known as 1998
User avatar
Caveman
Toyspeed Member
 
Posts: 1918
Joined: Sun Sep 12, 2004 11:20 am
Location: West Auckland


Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 25 guests