AE101 front swaybar bushes

[AceSniper]

hey, im just wondering if anyone knows of a shop that will do them, as nolathane dont seam todo them an i was told only toyota and TRD would do them with the shape of the back of them. Anyone know of a place that will do them custom with out costing a ton and know what there doing?

[bad20v]

Super strut or non?

[AceSniper]

Non :p

[Mr Revhead]

dude, cheap and easy.... email

[bad20v]

dude, cheap and easy.... email

Yeah, email Warwick or find a suspension shop that sells the 'SuperPro' brand of bushes. They are the equivalent of Nolathane, and some people reakon they are better and last longer. Its just a replacement urathane bush but people like brand names.

When you ask them for the bushes, they might say that they don't have them for non-super-strut AE101. Ask them for AE92 bushes instead, as they are pretty much the same suspension wise and the bushes should fit. They are about $20 for a set (Retail).

[aesc]

AFAIK front suspension bushes are just round shaped, they are not like the rears where they have a flat edge to them. I had the same type of problem when I replaced mine a while back, as I thought the fronts may have had a flat edge to them too but they dont.

I ended up buying some genuine bushes off Warwick, but if you go into SAS they will sell you some universal Superpro or Nolathanes. I know the front sway bar on S/S is 24mm, dont see why non should be diff

[AceSniper]

thanks for the help
yea its that angled back on them that seams to be the problem, any idea of part numbers that fit? (superpro)

Iv emailed revhead so Ill prolly just replace with stock items

[AceSniper]

while ontopic
Also the front Arm bush's I have atleast one thats cracked an turned to shit, has anyone replaced them? how easy is it... or do they have to be press fitted an all, also anyone got part numbers for them?

thanks

[Mr Revhead]

which one? the front or rear on that arm?

[AceSniper]

prolly both sides i know its a front one that looks completley screwed but the rest arnt much better, were the A arm fits onto the X Member

[Mr Revhead]

from toyota thats part of the A arm.....

[bad20v]

Front Lower Control Arm Inner Front Bush: Part # SPF0996K (SuperPro)

Front Sway Bar 'D' Bushes: Part # SPF0991-24K (SuperPro)

[AceSniper]

sweet checked it out today
The front swaybar is SPF99124k
Just checking b4 I order since im lazy its 24mm is the swaybar on a 93 AE101 non superstrut with ABS have a 24mm bar

Also looks cheaper to just replace the front arms at $50ish+ per bush