Toyspeed.org.nz Message Board

by **GGnz** » Thu Oct 13, 2005 4:12 pm

Hey,

Trying to use the Ignition Wire to power up my guages. What is the colour of the Wire for a AE111 Trueno? I only want it so the guages turn on when in the ON possible and not the ACC?

Any help would be appreciated.

Cheers.

MY KE70'S · by **pervert** » Thu Oct 13, 2005 4:14 pm

If you can't find which one the ignition is, just use a multimeter to see which fuses in the in-cabin fuse box have voltage in the right key positions, and get the power from there.

by **AceSniper** » Thu Oct 13, 2005 4:17 pm

or just prod the main ign wires with a test light

by **GGnz** » Thu Oct 13, 2005 4:18 pm

So are they different colours with different Toyotas? I dont have a multimeter and was hoping someone might know the colour code. Im assuming it would probably work fine on ACC anyways.

by **GGnz** » Thu Oct 13, 2005 4:23 pm

Its all right, found it on the net

.

http://www.the12volt.com/request/2000corolla.asp

Seems to be either Black/Yellow or Black/White/

by **Jebus** » Thu Oct 13, 2005 4:26 pm

id get a test light and test just to be sure. most $2 shops have them.

MY KE70'S · by **pervert** » Thu Oct 13, 2005 4:28 pm

Seriously, get a $10 multimeter, you seem to have a lot of electrical related problems, it must be $&#$% hard to do things without one...

by **GGnz** » Thu Oct 13, 2005 4:36 pm

Just cut the Black/Yellow one and guess what?

Nothing turned on. No dash lights, no A/C. Just the headunit lol.

So it was the Black/Yellow after all. Guages are almost finally done. Thanks for your help

Toyspeed.org.nz Message Board

Ignition Wire Colour

Ignition Wire Colour

Who is online