Toyspeed.org.nz Message Board

Toyota Club of New Zealand Message Board

Skip to content

Removing cam shafts in 4age

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Post a reply

Removing cam shafts in 4age

Postby gordon77 » Thu Nov 17, 2005 5:27 pm

im looking at putting some bluetop cams in my small port :) i have a manual in front of me, this is what it tells me to remove...

1. Disconnect battery earth
2. Remove dizzy and spark plugs
3. Remove Fuel Pump
4. remove camshaft toothed pulley...

ok i get all but number 3... remove the fuel pump??? WTF?? so i gotta take my fuelpump out to do my cams.... :? 8O

am i missing something here? 8O or is it a typo in my haynes workshop manual?
What is RR?
User avatar
gordon77
Toyspeed Member
 
Posts: 755
Joined: Sun Dec 15, 2002 5:07 pm
Location: Garage RR
Top

Postby ATAl » Thu Nov 17, 2005 5:33 pm

You don't need to touch the fuel pump, it's completly unrelated!

Just make sure you set the engine to TDC BEFORE you take the cams out, makes life a whole lot easier.
ATAl
Toyspeed Member
 
Posts: 486
Joined: Tue Nov 23, 2004 8:16 pm
Location: Wellington
Top

Postby gordon77 » Thu Nov 17, 2005 5:35 pm

ATAl wrote:You don't need to touch the fuel pump, it's completly unrelated!

Just make sure you set the engine to TDC BEFORE you take the cams out, makes life a whole lot easier.


yeah didnt think so but wanted to make sure. the workshop manual covers it very well (i hope) so should be sweet :)
What is RR?
User avatar
gordon77
Toyspeed Member
 
Posts: 755
Joined: Sun Dec 15, 2002 5:07 pm
Location: Garage RR
Top

Postby Mr Revhead » Thu Nov 17, 2005 5:37 pm

try looking in the 4AGE section and not the 4AF......
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson
Top

Postby gordon77 » Thu Nov 17, 2005 8:32 pm

yeah im not thick mate 8) :D
What is RR?
User avatar
gordon77
Toyspeed Member
 
Posts: 755
Joined: Sun Dec 15, 2002 5:07 pm
Location: Garage RR
Top

Postby Mr Revhead » Thu Nov 17, 2005 10:20 pm

lol no its just the toyota manual covers both engines..... and in the 4af you have to remove the fuel pump... its quite easy to turn to the wrong page.... :wink:
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson
Top

Postby gasman » Sat Nov 19, 2005 11:19 pm

Mr Revhead wrote:lol no its just the toyota manual covers both engines..... and in the 4af you have to remove the fuel pump... its quite easy to turn to the wrong page.... :wink:


bin there done that
"What can possibly go wrong?"
User avatar
gasman
Toyspeed Member
 
Posts: 999
Joined: Tue May 04, 2004 11:29 pm
Location: lower hutt, wellington
Top

Postby gordon77 » Sun Nov 20, 2005 12:05 am

Mr Revhead wrote:lol no its just the toyota manual covers both engines..... and in the 4af you have to remove the fuel pump... its quite easy to turn to the wrong page.... :wink:


haha yeah i see now, sorry dude :oops:
What is RR?
User avatar
gordon77
Toyspeed Member
 
Posts: 755
Joined: Sun Dec 15, 2002 5:07 pm
Location: Garage RR
Top
Post a reply

Return to Tech Questions

Who is online

Users browsing this forum: Google [Bot] and 5 guests

Powered by phpBB® Forum Software © phpBB Group
Time : 0.018s | 12 Queries | GZIP : On
cron