Does the AE101 4agze run a Exhaust o2 Sensor ?

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Does the AE101 4agze run a Exhaust o2 Sensor ?

Postby beeker » Sat Nov 19, 2005 9:13 pm

Does the AE101 4agze run a Exhaust o2 Sensor ?
94 DC2 Integra Race Car
02 M3 Race Car build
06 RS4 Avant
beeker
Toyspeed Member
 
Posts: 711
Joined: Mon Feb 28, 2005 5:25 pm
Location: Auckland

Postby Mr Revhead » Sat Nov 19, 2005 9:17 pm

yes
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby beeker » Sat Nov 19, 2005 9:23 pm

Mr Revhead wrote:yes


immmm,


My AE101/4agze powered AE86 dont have one (after market extractors).

Recommend to fit one ?

Note: Its Targa / competition use only. S/C is also Hard wired on full time.
94 DC2 Integra Race Car
02 M3 Race Car build
06 RS4 Avant
beeker
Toyspeed Member
 
Posts: 711
Joined: Mon Feb 28, 2005 5:25 pm
Location: Auckland

Postby Brick » Sat Nov 19, 2005 9:38 pm

on my custom extractors/exhaust it had one put in, dont no if it was ever wired up :?
User avatar
Brick
I know Kung Fu
 
Posts: 2695
Joined: Thu Feb 24, 2005 7:41 pm
Location: ChCh

Postby Crucible » Sun Nov 20, 2005 1:01 am

No O2, Wouldn't it run like a dog without one ???????
Last edited by Crucible on Sun Nov 20, 2005 1:08 am, edited 2 times in total.
User avatar
Crucible
Real Life Mechanic
 
Posts: 1438
Joined: Sun Jul 17, 2005 2:46 am
Location: Wellington

Postby Crucible » Sun Nov 20, 2005 1:03 am

beeker wrote:
Mr Revhead wrote:yes


immmm,


My AE101/4agze powered AE86 dont have one (after market extractors).

Recommend to fit one ?

Note: Its Targa / competition use only. S/C is also Hard wired on full time.


Are you running the standard ECU? I thought the ECU would go into failsafe with no signal from the O2 sensor?
I would say you should fit one as the ECU needs a signal back to judge inj/ pulsewidth and would stay in Open Loop mode or go into failsafe "engine check"....wouldnt it ???

Tap the O2 into the collector.

However saying that Ive also seen aftermarket extractors on a Nissan SR20 where the O2 sensor was at the first 2/1 collector NOT the end collector, dunno if the extractor factory didnt think about this to well or what?? Maybe it dont matter??

TNT
User avatar
Crucible
Real Life Mechanic
 
Posts: 1438
Joined: Sun Jul 17, 2005 2:46 am
Location: Wellington

Postby beeker » Sun Nov 20, 2005 8:24 am

True-No-Turbo wrote:
beeker wrote:
Mr Revhead wrote:yes


immmm,


My AE101/4agze powered AE86 dont have one (after market extractors).

Recommend to fit one ?

Note: Its Targa / competition use only. S/C is also Hard wired on full time.


Are you running the standard ECU? I thought the ECU would go into failsafe with no signal from the O2 sensor?
I would say you should fit one as the ECU needs a signal back to judge inj/ pulsewidth and would stay in Open Loop mode or go into failsafe "engine check"....wouldnt it ???

Tap the O2 into the collector.

However saying that Ive also seen aftermarket extractors on a Nissan SR20 where the O2 sensor was at the first 2/1 collector NOT the end collector, dunno if the extractor factory didnt think about this to well or what?? Maybe it dont matter??

TNT


Yes, am running std AE101 4agze ECU. Std Pulley, Std AE101 intercooler (but as frontmount), std evrything except for intake pod and that its in an AE86 chassis.

Are all 4age series O2 Sensors the same ?
and
Where the hell do i wire it too !!! Anyone got wiring plan for the AE101 4agze?.
94 DC2 Integra Race Car
02 M3 Race Car build
06 RS4 Avant
beeker
Toyspeed Member
 
Posts: 711
Joined: Mon Feb 28, 2005 5:25 pm
Location: Auckland

Postby Rick » Sun Nov 20, 2005 9:16 am

Image
Corolla Levin AE-85 1984(Project car)
Corolla Runx Z (Runabout)
User avatar
Rick
Toyspeed Member
 
Posts: 1712
Joined: Fri Feb 06, 2004 6:52 pm
Location: West Auckland

Postby Crucible » Sun Nov 20, 2005 8:23 pm

Things you find on trade me - Here ya go :lol:

http://www.trademe.co.nz/Trade-Me-Motor ... 794031.htm
User avatar
Crucible
Real Life Mechanic
 
Posts: 1438
Joined: Sun Jul 17, 2005 2:46 am
Location: Wellington

Postby Crucible » Sun Nov 20, 2005 8:25 pm

Sorry accidental double post "edit"
Last edited by Crucible on Sun Nov 20, 2005 8:26 pm, edited 1 time in total.
User avatar
Crucible
Real Life Mechanic
 
Posts: 1438
Joined: Sun Jul 17, 2005 2:46 am
Location: Wellington

Postby beeker » Sun Nov 20, 2005 8:26 pm

True-No-Turbo wrote:Things you find on trade me - Here ya go :lol:

http://www.trademe.co.nz/Trade-Me-Motor ... 794031.htm


yeah saw that, and was gonna have a go, just as long as its the correct part. Assume these are all the same ?
94 DC2 Integra Race Car
02 M3 Race Car build
06 RS4 Avant
beeker
Toyspeed Member
 
Posts: 711
Joined: Mon Feb 28, 2005 5:25 pm
Location: Auckland

Postby Crucible » Sun Nov 20, 2005 8:35 pm

beeker wrote:
True-No-Turbo wrote:Things you find on trade me - Here ya go :lol:

http://www.trademe.co.nz/Trade-Me-Motor ... 794031.htm


yeah saw that, and was gonna have a go, just as long as its the correct part. Assume these are all the same ?


Thats the puppy - Its out of an AE101 GTZ :lol: , Have you got the plug off the loom to tap it in??
User avatar
Crucible
Real Life Mechanic
 
Posts: 1438
Joined: Sun Jul 17, 2005 2:46 am
Location: Wellington

Postby beeker » Sun Nov 20, 2005 9:48 pm

True-No-Turbo wrote:
beeker wrote:
True-No-Turbo wrote:Things you find on trade me - Here ya go :lol:

http://www.trademe.co.nz/Trade-Me-Motor ... 794031.htm


yeah saw that, and was gonna have a go, just as long as its the correct part. Assume these are all the same ?


Thats the puppy - Its out of an AE101 GTZ :lol: , Have you got the plug off the loom to tap it in??


Not sure, maybe not. I'll have a good look at the loom soon, else I'll prob need to wire it back to the ECU myself.

I didnt build the car. The guy who did didnt fit the 02. Note sure why he didnt ? Maybe because it was a dedicated Targa / competition car he didnt feel the need ? ie o2 not needed under WOT i believe.
Last edited by beeker on Sun Nov 20, 2005 9:51 pm, edited 1 time in total.
94 DC2 Integra Race Car
02 M3 Race Car build
06 RS4 Avant
beeker
Toyspeed Member
 
Posts: 711
Joined: Mon Feb 28, 2005 5:25 pm
Location: Auckland

Postby no_8wire » Sun Nov 20, 2005 9:49 pm

Maybe because it was a dedicated Targa / competition car he didnt feel the need ?


But the O2 sensor helps with the fueling...ie with out it you will run to rich....
User avatar
no_8wire
Toyspeed Member
 
Posts: 2268
Joined: Thu Dec 30, 2004 7:30 pm

Postby beeker » Sun Nov 20, 2005 9:51 pm

no_8wire wrote:
Maybe because it was a dedicated Targa / competition car he didnt feel the need ?


But the O2 sensor helps with the fueling...ie with out it you will run to rich....


At WOT ?

I thought at WOT it doesnt use the o2 ?
94 DC2 Integra Race Car
02 M3 Race Car build
06 RS4 Avant
beeker
Toyspeed Member
 
Posts: 711
Joined: Mon Feb 28, 2005 5:25 pm
Location: Auckland


Return to Tech Questions

Who is online

Users browsing this forum: Google [Bot] and 18 guests

cron