Anyone bought from KW NZ?

General discussions on all non technical car related topics

Moderator: The Mod Squad

Anyone bought from KW NZ?

Postby Lanius » Wed Nov 23, 2005 8:19 am

http://www.nzkw.com/about/about_main.htm

I'm thinking about buying a couple of pieces from these guys, just want to know if anyone has purchased anything from them? Good? Bad? Experiences?

Particularly interested in comments on the quality of their products.

Cheers
Lanius
** Moderator **
 
Posts: 2730
Joined: Tue Jan 07, 2003 6:32 pm
Location: BrisVegas

Postby Lanius » Wed Nov 23, 2005 12:10 pm

bump
Lanius
** Moderator **
 
Posts: 2730
Joined: Tue Jan 07, 2003 6:32 pm
Location: BrisVegas

Postby Emperor » Wed Nov 23, 2005 12:13 pm

Was also gona buy something from them.
facebook.com/zeroclearanceswag
User avatar
Emperor
Toyspeed Member
 
Posts: 4815
Joined: Wed May 12, 2004 1:14 am
Location: Hamilton

Postby vhpacer » Wed Nov 23, 2005 12:14 pm

I dont buy anything without a reputable brand name. Like the stuff on that site :?
User avatar
vhpacer
Toyspeed Member
 
Posts: 434
Joined: Tue Oct 04, 2005 11:26 am
Location: Chch

Postby 86_rolla » Wed Nov 23, 2005 12:45 pm

yeh i brought a couple of seats off them aye. If its hard out quality u want from them i wouldnt recommend them. The seats i got, are mad of fabric that gets heaps of "pulls" in it so you have to be extra careful with it :( . There service and stuff is alrite, i think they also have a warranty for manufacterers faults 8)
Current: EF Honda civic
Ex cars: 2E corolla
http://toyspeed.blakjak.net/profiles/pr ... hp?id=1488
86_rolla
Toyspeed Member
 
Posts: 1069
Joined: Sat Aug 07, 2004 1:05 pm
Location: Auckland

Postby Lanius » Wed Nov 23, 2005 1:33 pm

vhpacer wrote:I dont buy anything without a reputable brand name. Like the stuff on that site :?


Fair enough ... I tend to care more about the quality of product than the brand name, hence me asking if anyone has purchased anything from them ;) I don't need race approved gear or anything like that, just a comfortable seat that I won't slide off every time I go round a corner at anything over 20kph.

Thx 86_rolla, thats exactly the kind of info I'm after.

Anyone else?
Lanius
** Moderator **
 
Posts: 2730
Joined: Tue Jan 07, 2003 6:32 pm
Location: BrisVegas

Postby Jebus » Wed Nov 23, 2005 2:15 pm

The cushions on thier buckys pull out too, theyre just valcro'd on, but theyre quite nice seats for everyday. Not racing or anything. their quality overall is pretty good, havnt brought anything off them just had a descent play in thier shop.
Jebus
Toyspeed Member
 
Posts: 1780
Joined: Sun Apr 27, 2003 8:21 pm
Location: Papakura

Postby Lanius » Wed Nov 23, 2005 2:46 pm

Jebus wrote:The cushions on thier buckys pull out too, theyre just valcro'd on, but theyre quite nice seats for everyday. Not racing or anything. their quality overall is pretty good, havnt brought anything off them just had a descent play in thier shop.


Yeh, I saw that part about the cushions, still not sure if thats a good or bad point :P

The showroom you checked out ... was that the one on Cook Street in the city?

I'm waiting on replies from both Racetech and Racepro regarding some of their seat models, but I'm willing to bet they'll come in around double the cost of one of these KW models. Would rather pay more and get a seat that will last more than 6 months tho :)
Lanius
** Moderator **
 
Posts: 2730
Joined: Tue Jan 07, 2003 6:32 pm
Location: BrisVegas

Postby Jebus » Wed Nov 23, 2005 3:05 pm

Yup was the one in town, Segedins out at airport oaks have nice EMH bucket seats for $450 a pair, having seen these in person to id say these are a step up from the KW seats. Maybe check them out, theres also another place in Manurewa which stock seats of the similar class for about $550 a pair, again good seats.
Jebus
Toyspeed Member
 
Posts: 1780
Joined: Sun Apr 27, 2003 8:21 pm
Location: Papakura

Postby Lanius » Wed Nov 23, 2005 3:09 pm

Excellent, thanks Jebus, very helpful :D

Will have a look and see if I can find some more info about those other two :)
Lanius
** Moderator **
 
Posts: 2730
Joined: Tue Jan 07, 2003 6:32 pm
Location: BrisVegas

Postby Silent Knight » Wed Nov 23, 2005 3:12 pm

Lanius which Racetech seats were you enquiring about?

I will be looking at getting one of their seats for me soon. And I need it FIA approved which most their good ones are but I'd be interested to know in what sort of price for which range I'll be looking at paying and also how comfortable teh seats are.
Image
User avatar
Silent Knight
Toyspeed Member
 
Posts: 6188
Joined: Tue Aug 05, 2003 12:30 am
Location: 'Save the Whale Foundation'

Postby wde_bdy » Wed Nov 23, 2005 3:18 pm

Silent Knight wrote:Lanius which Racetech seats were you enquiring about?

I will be looking at getting one of their seats for me soon. And I need it FIA approved which most their good ones are but I'd be interested to know in what sort of price for which range I'll be looking at paying and also how comfortable teh seats are.


RaceTech FIA (4000 model, 1000 has no FIA approval) is over $800 a seat. Apparently Jamex have FIA approval on some of their seats but not in the country yet.

Callum
User avatar
wde_bdy
Toyspeed Member
 
Posts: 2704
Joined: Wed Oct 23, 2002 11:43 pm
Location: Gisborne

Postby Lanius » Wed Nov 23, 2005 3:18 pm

I'm not after a FIA approved seat as they tend to cost more, and I'm not going to be entering any competitions. Looking at the Racetech 1000, which is pretty much the standard, non-reclineable, non-FIA replacement bucket seat. I don't want anything over the top, too brightly coloured or otherwise attention-drawing ... trying to keep the car as inconspicuous as possible :P
Lanius
** Moderator **
 
Posts: 2730
Joined: Tue Jan 07, 2003 6:32 pm
Location: BrisVegas

Postby Lanius » Wed Nov 23, 2005 3:32 pm

purple_beasty wrote:RaceTech FIA (4000 model, 1000 has no FIA approval) is over $800 a seat. Apparently Jamex have FIA approval on some of their seats but not in the country yet.

Callum


Just looking at some of the Jamex seats ... most of them appear to be steel framed, as opposed to the Racetech / Racepro fibreglass seats. I've been warned to avoid Jamex seats if possible as they're heavier and not as good quality as the Racetech / Racepro seats.

I take it you've had a different experience with them Purple?
Lanius
** Moderator **
 
Posts: 2730
Joined: Tue Jan 07, 2003 6:32 pm
Location: BrisVegas

Postby fangsport » Wed Nov 23, 2005 4:34 pm

Racetech 100 are possibly the best value seat from a reputable manufacturer if you are after a one piece composite seat. there are steel framed seats that are possibly a better option for a road car, as they bolt to factory runners.
I've been a bad bad boy. I should read the rules and behave before I get spanked by an admin

f#@k you i won't do what ya tell me

http://www.facebook.com/pages/Fangwood/225658970893404
fangsport
Toyspeed Member
 
Posts: 4169
Joined: Sun Nov 30, 2003 10:52 am
Location: Timaru

Postby wde_bdy » Wed Nov 23, 2005 5:22 pm

Lanius wrote:I take it you've had a different experience with them Purple?


Nah, just what I have found from researching for my own car. I am currently looking at importing some OMP seats, steel framed with head restraints. Heavy (12kg) but comparatively cheap for FIA approved with head restraints.

Callum
User avatar
wde_bdy
Toyspeed Member
 
Posts: 2704
Joined: Wed Oct 23, 2002 11:43 pm
Location: Gisborne

Postby 86_rolla » Wed Nov 23, 2005 5:58 pm

yeh those kw's r alright just for everyday use. Fairly cheap (good or bad thing :? ) $450 for 2 reclining ones. But i guess if you got the $$ to spare go for the others.

There showroom is on cook street, its inside a building with a couple of other companys aswell.
Current: EF Honda civic
Ex cars: 2E corolla
http://toyspeed.blakjak.net/profiles/pr ... hp?id=1488
86_rolla
Toyspeed Member
 
Posts: 1069
Joined: Sat Aug 07, 2004 1:05 pm
Location: Auckland

Postby Lanius » Wed Nov 23, 2005 6:22 pm

K, thanks heaps for the info guys. I'll go and check out the KWs and see if they're what I'm looking for.

Many thanks :)
Lanius
** Moderator **
 
Posts: 2730
Joined: Tue Jan 07, 2003 6:32 pm
Location: BrisVegas

Postby JustinSpiderholden » Thu Nov 24, 2005 9:51 am

i got a apr of there deep buckets for the rpice i recon they are very good value and seem to be of ok quaility
JustinSpiderholden
Toyspeed Member
 
Posts: 978
Joined: Thu Jun 06, 2002 11:40 am

Postby wde_bdy » Thu Nov 24, 2005 9:43 pm

These guys may be worth a look for others looking at FIA approved, but approval only seems to be on the carbon fibre and kevlar versions.
http://www.seatwarehouse.co.nz/sport.html
Prices were in the latest petrolhead mag, BM-V $495+gst and BM-111 for $460+gst. Not sure on the prices for the carbon fibre and kevlar versions.

Callum
User avatar
wde_bdy
Toyspeed Member
 
Posts: 2704
Joined: Wed Oct 23, 2002 11:43 pm
Location: Gisborne

Next

Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 3 guests