silvertop speedo in aw11

[blue-smoke]

i have used the silvertop gear box in my aw11 (when i did the converson) but the conncetions are differnt (the blue top gear box had a screw in speedo cable but the silvertop has a point plug) so i need a was to tell the speed apart from putting my hand out the window and gaugeing it, i heard something about haven to use the a silvertop gauge cluster?

[*84vvt*]

No need to run the Silver top dash
just pull out the electronic sender
and put in the AW11 cable
it works just fine

[Adydas]

might sound rice.. but why not get your hands on a cheap trade me Apexi RSM, would show RPM and Speed suiting your needs.. and the other functions can be cheerys on the cake type of thing? probly work out simlar $$

[blue-smoke]

i have heard storys about how you rip out the old electornic concection for the speedo to the gear box and fit it with a old macanical one out of the blue top or a red top and it should be fine, is this right

[fuel]

i have heard storys about how you rip out the old electornic concection for the speedo to the gear box and fit it with a old macanical one out of the blue top or a red top and it should be fine, is this right

No need to run the Silver top dash
just pull out the electronic sender
and put in the AW11 cable
it works just fine

^^

[Mr Revhead]

hey, maybe you could pull the electronic sender out and use the aw11 one.

[TrouserFxGt]

I don't know if it's been mentioned but you might want to remove the electrical sender and use your old one.

[XS1V]

hey, maybe you could pull the electronic sender out and use the aw11 one.

i just did this on my ae82 20v conversion adn its one bolt on each box, very easy