ae85 20v 4age conversion- wiring!!! yay!

[wannabe86]

there are 4 wires going from engine thru firewall.
colours are:
black/orange (goes to same colour wire in ae85 on ignition?)
black/white (goes to same colour wire in ae85 on ignition?)
can anyone tell me what the two white wire are for? one is thicker than the other.

does anyone have a 20v ae85 in auckland area that i could have a look at?

wiring diagrams don't show this as far as i have seen. thanks
jon

[Rick]

Are you talking about the wires on the drivers side where they come through the firewall?

[wannabe86]

yes. there is that large black plug. on ae85 and ae86, there are more wires but no white ones.

[crispy'86]

have you got it sorted?? If not the black/orange wire is for ignition feed when key is on, black/white starter feed, as most toyotas are. White should be permanent power, either for alternator aswell as ignition feed to switch

[suckymotor]

hows the conversion going would be keen for a look at some stage to see what it looks like copaired to my one

[wannabe86]

thanks crispy. that is helpful

suckymotor: sure you can. i would be keen to see yours too.
give me a call sometime. 021355868.