Best tyres for the job?

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Postby flygt4 » Sat Jan 28, 2006 9:34 pm

i bought a set of 4 b4 xmas. 205/40/17 , retail price was $265 each 8O tho i dont know many people who pay retail for tyres anyway , i got mine a fair bit cheaper :D

the good stuff above all applies, great street tyre , sticky at low temps , great in the wet etc and awesome lateral grip thru corners.
i have twice heard of them being ripped to shreds and falling apart after 3 hard laps on a track so id say suitable for a street tyre only.

they lasted a 30minute hard drive through some twistys with no visible damage for me tho, so i wont complain :wink:

they also turn into very expensive smoke if one gets a little hasty
User avatar
flygt4
Toyspeed Member
 
Posts: 3820
Joined: Sat Sep 20, 2003 6:57 pm
Location: Wellington

Postby DB4G63 » Sat Jan 28, 2006 9:54 pm

Not inflate the F1s to over 30psi? I have 38psi in the rears and 34psi in the fronts Confused 205/40R17 front and 235/40R17 rear.


My tyre guy reckoned much more than that and your creating a concave surface, of which you are only rolling on the very middle of the tyre....so uneven tyre wear... or premature wear or somesuch.

:? hmm but i dont sell tyres, so its probibly just what he sez to ever customer....

I used to have some Hankook 195/55/15 and 38psi suited them just fine....
:roll:
"If I'm a child that means you're a pedophile, and I'll be damned if i'm going stand here and take this from a pervert."

Wheels: AE101 1993 GTZ Trueno (S/C)
User avatar
DB4G63
Toyspeed Member
 
Posts: 178
Joined: Tue Feb 22, 2005 8:58 pm
Location: Dunedin NZ

Postby Al » Sat Jan 28, 2006 10:04 pm

Yeah I've had my F1's on for around 10,000km (since September) and they have worn so evenly it looks like they havent worn at all, with those pressures 8O
85 Corolla GT - 08 Blade Master G
Image
User avatar
Al
Toyspeed Member
 
Posts: 6146
Joined: Mon Jan 20, 2003 11:52 pm
Location: Christchurch

Postby DB4G63 » Sat Jan 28, 2006 10:10 pm

Yeah I've had my F1's on for around 10,000km (since September) and they have worn so evenly it looks like they havent worn at all, with those pressures


Well that answers that! :D
"If I'm a child that means you're a pedophile, and I'll be damned if i'm going stand here and take this from a pervert."

Wheels: AE101 1993 GTZ Trueno (S/C)
User avatar
DB4G63
Toyspeed Member
 
Posts: 178
Joined: Tue Feb 22, 2005 8:58 pm
Location: Dunedin NZ

Postby sergei » Sat Jan 28, 2006 10:52 pm

infact I think 30psi is a bit low for those tyres, I always get good kms out of them on 36-40psi...
User avatar
sergei
Mad Russian
 
Posts: 8406
Joined: Wed May 15, 2002 12:06 pm
Location: North Shore

Postby Quint » Sun Jan 29, 2006 11:00 am

Jeezh, that must make for a rough ride? i run 32 in the front 235/45 and 30 in the rear 255/40.
User avatar
Quint
Toyspeed Member
 
Posts: 1251
Joined: Tue May 24, 2005 2:24 pm

Postby Cyclone21 » Sun Jan 29, 2006 4:42 pm

I run these tyres on my car, they are excellent.
Cyclone21
Toyspeed Member
 
Posts: 92
Joined: Thu May 16, 2002 10:55 am

Postby Si » Sun Jan 29, 2006 4:43 pm

quint, on my supra
(225/50r16, 245/50r16)

i have proxy T1R's on the front, and hankooks ho4ts on the rear,
fronts around 34-36 psi, rears 40ish in summer,

the toyos have very good grip in the wet, even more than the T1S's that i had on there before. just waiting to see what sort of KMS they will last for.
at this stage im thinking deff no more than 20,000kms.

im either going to 215/225 in 16 all round, or if my plans work 17" 215s,
i think 215s wont cut it for the rear end grip however,
Current: , '96 SubaruImpreza
Previous: '92 EE80 Corolla, '91 JZZ30 Soarer(The single snail whale), '91 AE92 FXGT(Silvertop 20v), '92 JZA70 MkIIISupra (The twin snail whale), '82 MkV Cortina.
User avatar
Si
Toyspeed Member
 
Posts: 1304
Joined: Wed Jan 07, 2004 10:19 pm
Location: Wellywood

Postby tomo1985 » Mon Jan 30, 2006 10:15 am

Im running 40psi but they are 215/35/18 so you dont have much tire to play with.
tomo1985
Toyspeed Member
 
Posts: 206
Joined: Thu Aug 25, 2005 12:12 pm
Location: CHCH

Postby neo » Mon Jan 30, 2006 10:22 am

Leon wrote:They were the control tire for the Production Racing series last year, and the Evo's and WRX's were literally ripping the tire tread to bits in only a couple of races, so I can suggest that if you're doing hard track time, then you should avoid these tires. The same warning would apply for many soft road tires though :)


They tend to melt, even under the awesome pressure of a 20v at Taupo, I half used a brand new set at a toyspeed track day
User avatar
neo
Toyspeed Member
 
Posts: 1965
Joined: Tue May 21, 2002 1:04 am
Location: Crazy Car Motorsport

Postby Leon » Mon Jan 30, 2006 11:28 am

neo wrote:They tend to melt, even under the awesome pressure of a 20v at Taupo, I half used a brand new set at a toyspeed track day


Fudge ... ok, they're off my list then, as anything I own might have to put up with race track use. Wouldn't have thought they would die from the weight and power of an FXGT. I half killed a set of Yokohama commuter tires in no time flat myself on Manfeild, and it's very frustrating. Still, at least they only cost about $65 a corner ;)
User avatar
Leon
Toyspeed Member
 
Posts: 6642
Joined: Wed Feb 26, 2003 6:27 pm
Location: Wellington

Postby fivebob » Mon Jan 30, 2006 11:39 am

Probably too small a block size for track use, and they can't dissipate the heat quick enough. Might last longer if you shave them first (like you should with any new street tyre used on the track), but that cuts street mileage down drastically :cry:

Speaking of track tyres, what's the current selection of semi slicks like, do Yokohama still make the A032R?
User avatar
fivebob
Toyspeed Member
 
Posts: 3879
Joined: Fri May 02, 2003 5:12 pm
Location: Tauranga

Postby tomo1985 » Mon Jan 30, 2006 12:35 pm

Id be running atleast 32psi in them. Another good tire would have to be yokos A539.
tomo1985
Toyspeed Member
 
Posts: 206
Joined: Thu Aug 25, 2005 12:12 pm
Location: CHCH

Postby the fallen303 » Mon Jan 30, 2006 11:45 pm

dad has the F1's on the aristo, 265/18's all round, corners very nicely for an 1800kg car!! acceleration is also good, but being auto and traction control would help that a lot, lol. we had F1's on the back of the jza70 (225/50/16's) and i found that they did not grip as well in a straight line under heavy acceleration, but still cornered well (back wouldn't slide too badly). they do work very nicely on the front of the lucida van though :lol: keeps up with the supra and aristo through corners 8O
jzs147 aristo, jza70 supra, jza80 supra
true house of JZ
Image
Stay true to the origin
User avatar
the fallen303
Toyspeed Member
 
Posts: 1060
Joined: Sun Apr 20, 2003 8:05 pm
Location: hamilton

Postby Quint » Tue Jan 31, 2006 6:39 pm

Image


???????????????????????

Excuse the artist licence (couldn't find the damn sign.)
User avatar
Quint
Toyspeed Member
 
Posts: 1251
Joined: Tue May 24, 2005 2:24 pm

Postby 2LTR Rona » Tue Jan 31, 2006 7:10 pm

flygt4 wrote:i bought a set of 4 b4 xmas. 205/40/17 , retail price was $265 each 8O tho i dont know many people who pay retail for tyres anyway , i got mine a fair bit cheaper :D

the good stuff above all applies, great street tyre , sticky at low temps , great in the wet etc and awesome lateral grip thru corners.


snap, did exactly the same thing before xmas too, and couldnt agree more about the grip, well worth the money in my books 8)
2002 Altezza, 1974 KE25

www.hccc.org.nz
User avatar
2LTR Rona
Toyspeed Member
 
Posts: 1903
Joined: Wed Aug 11, 2004 3:43 pm
Location: Wellington

Previous

Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 13 guests