17's

General discussions on all non technical car related topics

Moderator: The Mod Squad

17's

Postby 86_rolla » Mon Feb 06, 2006 12:11 pm

ok i no its not a toyota but hey. Ive got some 17X8 inch rims here to hopefully go on my EF civic. I put the ims on today, no tyres and tested it on full lock. It looks like with suspension travel its going to hit the inner gaurd. Any ideas on making these fit??? spacers?? will i have to lengthen the shafts that the wheels go on to?????
Current: EF Honda civic
Ex cars: 2E corolla
http://toyspeed.blakjak.net/profiles/pr ... hp?id=1488
86_rolla
Toyspeed Member
 
Posts: 1069
Joined: Sat Aug 07, 2004 1:05 pm
Location: Auckland

Postby Chickenman » Mon Feb 06, 2006 12:16 pm

My brother put 18's on his CRX, he just had to roll the guards.

In fact...
Image
Baby Jesus
User avatar
Chickenman
I Am The Walrus!
 
Posts: 3554
Joined: Thu May 29, 2003 11:29 am
Location: CHCH

Postby 86_rolla » Mon Feb 06, 2006 12:22 pm

yeh its not the fact that they are 17's its that they are 8 inches wide
Current: EF Honda civic
Ex cars: 2E corolla
http://toyspeed.blakjak.net/profiles/pr ... hp?id=1488
86_rolla
Toyspeed Member
 
Posts: 1069
Joined: Sat Aug 07, 2004 1:05 pm
Location: Auckland

Postby Wings_Alexander » Mon Feb 06, 2006 2:52 pm

remove the inner gaurd!
Wings_Alexander
Toyspeed Member
 
Posts: 35
Joined: Fri Feb 03, 2006 4:16 pm

Postby THA SHZ » Mon Feb 06, 2006 3:22 pm

no because of them bein 8 inches wide they basically stuff it up , they r to wide for the offset , and if u use spacers it will make it even worse 8)
Im the Daddy of the Mack Daddys ! :-)

http://toyspeed.blakjak.net/profiles/photos/861.jpg
User avatar
THA SHZ
Toyspeed Member
 
Posts: 2015
Joined: Wed May 12, 2004 5:48 pm
Location: Westside

Re: 17's

Postby RomanV » Mon Feb 06, 2006 3:41 pm

86_rolla wrote:ok i no its not a toyota but hey. Ive got some 17X8 inch rims here to hopefully go on my EF civic. I put the ims on today, no tyres and tested it on full lock. It looks like with suspension travel its going to hit the inner gaurd. Any ideas on making these fit??? spacers?? will i have to lengthen the shafts that the wheels go on to?????


Why did you buy rims, if you didnt know that they would fit?

Im not criticising, I'm genuinely curious. as posts like this seem to come up every now and then from various people.
User avatar
RomanV
Toyspeed Member
 
Posts: 4915
Joined: Wed Aug 13, 2003 12:17 am
Location: West Auckland

Postby 86_rolla » Mon Feb 06, 2006 5:24 pm

yeh i no my dumbass fault i just checked ah yip 4x100 sweet as, ah well shit happens
Current: EF Honda civic
Ex cars: 2E corolla
http://toyspeed.blakjak.net/profiles/pr ... hp?id=1488
86_rolla
Toyspeed Member
 
Posts: 1069
Joined: Sat Aug 07, 2004 1:05 pm
Location: Auckland

Postby toyoda » Mon Feb 06, 2006 6:09 pm

Chickenman wrote:My brother put 18's on his CRX, he just had to roll the guards.

In fact...
Image
:) cool car bro
User avatar
toyoda
Toyspeed Member
 
Posts: 16
Joined: Sun Oct 30, 2005 9:21 pm
Location: Auckland

Postby IH8TEC » Mon Feb 06, 2006 6:17 pm

did you buy them privately? if not and you brought them from say the likes of mag and turbo, you should be able to take them back surely, and get the proper size that suits? most decent companies shoudl be able to help you out in this situation
Current Rides: 1994 Hiace Custom
KTM 250sx

Previous Car: 1988 Toyota Levin 4agte
234kw atw and 12.5@183kmh
Sold to a muppit who wrecked it
Hmm
User avatar
IH8TEC
Toyspeed Member
 
Posts: 3128
Joined: Wed Nov 26, 2003 7:11 pm

Postby 86_rolla » Mon Feb 06, 2006 6:45 pm

i brought them off a dude from trademe, but on the auction it had a list of cars it would fit and civic was on it.
Current: EF Honda civic
Ex cars: 2E corolla
http://toyspeed.blakjak.net/profiles/pr ... hp?id=1488
86_rolla
Toyspeed Member
 
Posts: 1069
Joined: Sat Aug 07, 2004 1:05 pm
Location: Auckland

Postby IH8TEC » Mon Feb 06, 2006 6:47 pm

try email him and see how good a trader he is, mind you he might say, well they fit, jsut dont turn sharp corners or some crap like that :?
Current Rides: 1994 Hiace Custom
KTM 250sx

Previous Car: 1988 Toyota Levin 4agte
234kw atw and 12.5@183kmh
Sold to a muppit who wrecked it
Hmm
User avatar
IH8TEC
Toyspeed Member
 
Posts: 3128
Joined: Wed Nov 26, 2003 7:11 pm

Postby Lloyd » Mon Feb 06, 2006 6:57 pm

What would you expect putting 8 inch wide mags on a Civic though?
User avatar
Lloyd
** Moderator **
 
Posts: 6195
Joined: Tue Oct 15, 2002 1:50 pm
Location: Dunedin

Postby 86_rolla » Mon Feb 06, 2006 7:06 pm

i didnt even look at the width, dumb i no. On his trademe post it said it fits civics.

What i might do is see if i can take it to a tyre shop and fit one of there shitty tyres to the mags and see how much it rubs and shit and then either take them back or do what is required to fit them
Current: EF Honda civic
Ex cars: 2E corolla
http://toyspeed.blakjak.net/profiles/pr ... hp?id=1488
86_rolla
Toyspeed Member
 
Posts: 1069
Joined: Sat Aug 07, 2004 1:05 pm
Location: Auckland

Postby Nuty|Mike » Mon Feb 06, 2006 7:44 pm

got any pics i might buy them off u if u want
05 Mazda Verisa .....for the Family
User avatar
Nuty|Mike
Toyspeed Member
 
Posts: 1714
Joined: Tue May 28, 2002 12:02 pm
Location: Dunedin

Postby Chickenman » Mon Feb 06, 2006 11:43 pm

toyoda wrote:
Chickenman wrote:My brother put 18's on his CRX, he just had to roll the guards.

In fact...
[img]pic[/img]
:) cool car bro



On it's 3rd or fourth ZC now...

Unfortunately my brother is an idiot :(

(Don't even start about the rear wing :roll: )
Baby Jesus
User avatar
Chickenman
I Am The Walrus!
 
Posts: 3554
Joined: Thu May 29, 2003 11:29 am
Location: CHCH


Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 32 guests