AE1O1 ENGINE CONVERSION

[ON PSI]

HI THERE GUYS IM DOING OA ENGINE CONVERSION FROM A SILVER TOP TO A BLACK TOP, IM HAVING TRUBLE WIRING IT IN TO THE AE101 CHASSI. I HAVE THE BLACK TOP LOOM AND FUSE BOX. ANY INFO WOULD BE VERY HELP FUL

[Alex B]

1) Turn your caps lock off.
2) Spelling.
3) What are the accual problems.

[slighty_sykotic]

Basically you'r $&#$%

As I am in the middle of finding out, there are no diagrams for th ae101 chassis.....

So your on your own .

Its not hard though, theres 4 wires in a plug at the back drivers side of the engine bay, 2 of those are power, ones the starter solinoid feed, and I dunno what the other one is.

And the rest of the connections from the body to the engine loom happen in two long flat plugs under the centre console.

O yeah, don't forgot the feed by the battery, the big ass white cable is the feed to the heater fan etc, and the little ones are hooked to the headlight relays.


--Sykotic

[AceSniper]

run silvertop loom, get ecu daiagrams for black an silver... solder blacktop loom plugs onto silvertop loom an just use the afm wires for the map sensor

[slighty_sykotic]

I should have said that, yeah, be a hell of alot easier.

Wasnt thinking

--Sykotic

[Lloyd]

1) Turn your caps lock off.
2) Spelling.
3) What are the accual problems.

"Actual"

[vvega]

or
just wire the ecu in only
useth afm wires to power up the map aensor and the temp sensore wires

takes about 3-4 hours to do
eazy as

sometimes you have to think ouside teh square lads
vvv
v
v
v
vv
v
v
v

[ROBODISCO_20v]

Have a look on www.club4ag.com they have heaps of useful info on wiring in the reference section