J-TUNE Drags

General discussions on all non technical car related topics

Moderator: The Mod Squad

J-TUNE Drags

Postby ROBODISCO_20v » Sat Mar 11, 2006 11:59 am

Congratulations toyspeeders for making the effort to come down & represent your chosen brand.
2 cars is a great effort :!:
Myself & HELBND where the only toyotas there in a sea of Hondas. Was a great day of racing. Got about 17 runs in over the day & ran a new PB of 14.92 so it was $30 well spent. Surprise surprise an honda took out the just about every class. I went down to an EK SiR hatch in my secound round of the eliminations. He ran a 14.3s.
Last edited by ROBODISCO_20v on Mon Mar 13, 2006 8:37 pm, edited 1 time in total.
User avatar
ROBODISCO_20v
Toyspeed Member
 
Posts: 599
Joined: Tue Jan 28, 2003 12:49 pm
Location: Manukau Toyota - Parts Dept

Postby Stu- » Sat Mar 11, 2006 1:29 pm

Gutted, didn't even know about it...
1985 Toyota Starlet EP71 (4agte)
Project Thread
http://garage4ag.wordpress.com
Auto electrical and ecu installation
User avatar
Stu-
Toyspeed Member
 
Posts: 1767
Joined: Wed May 15, 2002 4:17 pm
Location: Hiding from you...

Re: J-TUNE Drags

Postby trueno_20v » Sat Mar 11, 2006 1:31 pm

ROBODISCO_20v wrote:Congratulations toyspeeders for making the effort to come down & represent your chosen brand.
2 cars is an great effort :!:
Myself & HELBND where the only toyotas there in a sea of Hondas. Was a great day of racing. Got about 17 runs in over the day & ran a new PB of 14.92 so it was $30 well spent. Surprise surprise an honda took out the just about every class. I went down to an EK SiR hatch in my secound round of the eliminations. He ran a 14.3s.


What sort of trap speeds were you getting?
ADMIN EDIT: signature too large
User avatar
trueno_20v
Toyspeed Member
 
Posts: 589
Joined: Wed Aug 10, 2005 9:12 pm

Postby Dell'Orto » Sat Mar 11, 2006 1:41 pm

Where was the advertising for it? This is the first I've ever heard of J-tune :?
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby MacrosSiR » Sat Mar 11, 2006 2:02 pm

Mmm, Boost wrote:Where was the advertising for it? This is the first I've ever heard of J-tune :?


viewtopic.php?t=43315

I was the black ek hatch which got you in the second round but my best of the day was a 14.6.

The other black ek4 hatch with white wheels BONDIE was getting the 14.3's.
MacrosSiR
Toyspeed Member
 
Posts: 180
Joined: Tue May 25, 2004 1:22 pm
Location: Auckland

Postby VR-4Squid » Sat Mar 11, 2006 2:24 pm

Mmm, Boost wrote:Where was the advertising for it? This is the first I've ever heard of J-tune :?


ditto.
Image
SquidInc Custom CARtoons
VR-4Squid
Toyspeed Member
 
Posts: 536
Joined: Tue Apr 01, 2003 6:22 pm
Location: Diamond mine

Postby SilverTe » Sat Mar 11, 2006 6:54 pm

14.8 in my black mera. Nice racing ya dude in the levin
P10 mera 14.9@151km/h
SilverTe
Toyspeed Member
 
Posts: 74
Joined: Thu Oct 24, 2002 11:45 am

Postby QikStarlie » Sat Mar 11, 2006 10:53 pm

stink, i would have raced as well if i had of knowen about it..
User avatar
QikStarlie
Toyspeed Member
 
Posts: 1110
Joined: Tue Mar 25, 2003 10:30 pm
Location: lost..

Postby HELBND » Sun Mar 12, 2006 12:35 pm

was an awesome day - i got 24 runs in, and i left 2 hours before finish, so could have gotten plenty more. The MR2 ran a fastest time of 15.43s which i was pretty stoked about :D

next time, im planning to not race wth a full tank of gas, and possibly let som air out of my rear tires. that should help me shave a lil bit off that time
User avatar
HELBND
Toyspeed Member
 
Posts: 1578
Joined: Tue Feb 15, 2005 2:37 pm
Location: North Shore

Postby soopachargen » Sun Mar 12, 2006 1:32 pm

a little bit off topic... but does anyone actually read that auckland section other than the guys that go to the weekly meets??
I would have made the trip down from whangarei to get slayed in the 2wd forced induction class.
When in doubt, down and out.

"This is the Internet, it has no sympathy and shows no mercy. It feeds on weakness and preys on sensitivity. It will e-kill you at the first opportunity. Be brave or be e-dead." - NZHONDAS
User avatar
soopachargen
Toyspeed Member
 
Posts: 1598
Joined: Thu Aug 05, 2004 1:54 pm
Location: Silverdale

Postby Nuty|Mike » Sun Mar 12, 2006 9:22 pm

it does say Auckland/Upper north island :P


15.43 aint bad for the 20v aw strip her out and drop it into the 14,s ;)
05 Mazda Verisa .....for the Family
User avatar
Nuty|Mike
Toyspeed Member
 
Posts: 1714
Joined: Tue May 28, 2002 12:02 pm
Location: Dunedin

Postby ROBODISCO_20v » Mon Mar 13, 2006 6:33 pm

MacrosSiR wrote:
Mmm, Boost wrote:Where was the advertising for it? This is the first I've ever heard of J-tune :?

viewtopic.php?t=43315
I was the black ek hatch which got you in the second round but my best of the day was a 14.6.
The other black ek4 hatch with white wheels BONDIE was getting the 14.3's.

Oh i though you where bondie, I didn't realise there where 2 black EK hatches racing. What mods have you done to yours? I've heard EKs are quite hard to get good power out of with the factory ecu.

SilverTe what have you done to that primera :?: The first time I went to the drag wars in my standard AE101 Levin I delt to every primera i raced. & my best in that was only a 15.8. I was pretty impressed with yours

trueno_20v 146.3kph on average. I think the fastest i ran was 148 but with a slightly slower ET
User avatar
ROBODISCO_20v
Toyspeed Member
 
Posts: 599
Joined: Tue Jan 28, 2003 12:49 pm
Location: Manukau Toyota - Parts Dept

Postby MacrosSiR » Mon Mar 13, 2006 8:23 pm

ROBODISCO_20v wrote:Oh i though you where bondie, I didn't realise there where 2 black EK hatches racing. What mods have you done to yours? I've heard EKs are quite hard to get good power out of with the factory ecu.


just i/h/e and a bit of weight reduction..
MacrosSiR
Toyspeed Member
 
Posts: 180
Joined: Tue May 25, 2004 1:22 pm
Location: Auckland

Postby ROBODISCO_20v » Mon Mar 13, 2006 8:34 pm

Pretty impressive for those basic mods. My mate was looking at getting an EK SiR but got put off coz he read that the factory ecu's reset them selfs back to standard settings after a while when you do I/E. May it's just the american models that do that? In the states they replace the ecu with an EG one to get around this problem. He did test drive a few & wasn't that impressed with them. He then looked at EK9's but they where over $20K at the time. He ended up getting a Peugeot 306 GTi6 & keeping his EF3 & is trying to build a B16 eating ZC with some mugen bits

Here's a few pics of me from the day
Image
Image
Image
User avatar
ROBODISCO_20v
Toyspeed Member
 
Posts: 599
Joined: Tue Jan 28, 2003 12:49 pm
Location: Manukau Toyota - Parts Dept

Postby SilverTe » Wed Mar 15, 2006 5:42 pm

My mera just has pod, and exhaust, with slightly modded factory headers. 14.80@150km/h. My little cuz in his black primera that was racing did a 15.3 and hes stock apart from a pod filter. Was damn fun racing all the other NA cars. Had a couple of good drags with some integras too. Cant wait for the next one ;)
P10 mera 14.9@151km/h
SilverTe
Toyspeed Member
 
Posts: 74
Joined: Thu Oct 24, 2002 11:45 am


Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 48 guests