My FX is squeaky

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

My FX is squeaky

Postby FXGTV » Sun Mar 05, 2006 3:24 pm

Started my my car this morning and heard a dreadful sqeaking sound comming from the engine bay :? Sounds like its comming from the cam belt or power-steering/alternator belt.

The noise continues when driving, but its less pronounced whilst accelerating.
Any ideas on what may be causing this? The cam belt was replaced 10,xxx ks ago, so i doubt its that, but i have had a problem with the power steering belt before (an old lead id left hanging dropped down and flicked the belt right off).
1988 r31 TI Skyline.
1982 ra60 Celica (my Aussie Toyota and axle stand warrior).
ex: 1991 Corolla, 1989 fxgt-v, 1985 aw11. 1992 sw20 gt-s. 2002 glxi Lancer wagon (work hack)
next car - another a-dub please!
User avatar
FXGTV
Toyspeed Member
 
Posts: 1703
Joined: Tue Sep 06, 2005 7:57 pm
Location: Brisbane

Postby Jebus » Sun Mar 05, 2006 3:26 pm

Check the alt belt is tight.
Jebus
Toyspeed Member
 
Posts: 1780
Joined: Sun Apr 27, 2003 8:21 pm
Location: Papakura

Postby TrouserFxGt » Sun Mar 05, 2006 7:38 pm

One of either water pump, alternator, idler, a/c compressor bearings?
Alcohol, The cause of and solution to all lifes problems.
H J Simpson.
TrouserFxGt
Toyspeed Member
 
Posts: 500
Joined: Sat May 25, 2002 3:27 pm
Location: Marton

Postby FXGTV » Sun Mar 05, 2006 9:25 pm

I def think its the a/c belt. When i turn on the a/c the noise gets louder, so it stands to reason its that belt. Hopefully that doesnt mean its anything too serious....
1988 r31 TI Skyline.
1982 ra60 Celica (my Aussie Toyota and axle stand warrior).
ex: 1991 Corolla, 1989 fxgt-v, 1985 aw11. 1992 sw20 gt-s. 2002 glxi Lancer wagon (work hack)
next car - another a-dub please!
User avatar
FXGTV
Toyspeed Member
 
Posts: 1703
Joined: Tue Sep 06, 2005 7:57 pm
Location: Brisbane

Postby Caveman » Sun Mar 05, 2006 11:14 pm

I assume your talking about the car in your profile? ae92? always good to state what car your talking about :wink:

Anyway if its the AC then no worries, just the AC and PS suffer, nothing serious :lol: the tensioner is in between the AC and crank pully 8)
User avatar
Caveman
Toyspeed Member
 
Posts: 1918
Joined: Sun Sep 12, 2004 11:20 am
Location: West Auckland

Postby Leon » Mon Mar 06, 2006 9:44 am

open bonnet with engine running

carefully pour water on various belts (takes careful aiming)

when the noise changes markedly, that's the belt that is slipping.

Now you just have to find out if it is slipping because it is worn / loose or because your power steering or air con pump is trying to seize ;)
User avatar
Leon
Toyspeed Member
 
Posts: 6642
Joined: Wed Feb 26, 2003 6:27 pm
Location: Wellington

Postby FXGTV » Mon Mar 06, 2006 10:58 am

Haha sorry, yeah its my ae92. I poured water onthe belts and sure enough it got ummm ,squeakier when the water hit the p/s belt. I would tighten it myself, but alas, no tools. I've been getting some strange looks from pedestrians as i cruise the streets sqeaking like a mofo :lol:
1988 r31 TI Skyline.
1982 ra60 Celica (my Aussie Toyota and axle stand warrior).
ex: 1991 Corolla, 1989 fxgt-v, 1985 aw11. 1992 sw20 gt-s. 2002 glxi Lancer wagon (work hack)
next car - another a-dub please!
User avatar
FXGTV
Toyspeed Member
 
Posts: 1703
Joined: Tue Sep 06, 2005 7:57 pm
Location: Brisbane

Postby Jebus » Mon Mar 06, 2006 11:11 am

Its just your gilmer drives boss.
Jebus
Toyspeed Member
 
Posts: 1780
Joined: Sun Apr 27, 2003 8:21 pm
Location: Papakura

Postby Chickenman » Mon Mar 06, 2006 11:34 am

If you can't tighten it ($&#$% simple job) you could rub a candle on the belt (just hold it against one part of the belt with the engine running) and it may help.


But you should just get a couple of spanners and fix it.
Baby Jesus
User avatar
Chickenman
I Am The Walrus!
 
Posts: 3554
Joined: Thu May 29, 2003 11:29 am
Location: CHCH

Postby FXGTV » Thu Mar 23, 2006 5:04 pm

Update: I've worked out it only starts squeaking when it rains/has been raining, and a short term solution to the problem was to use candle wax (thanks Chickenman) but this only stops the noise for a few minutes.

No biggie though, car is going in for an oil and grease next week so ill hopefully get it sorted out then :)
1988 r31 TI Skyline.
1982 ra60 Celica (my Aussie Toyota and axle stand warrior).
ex: 1991 Corolla, 1989 fxgt-v, 1985 aw11. 1992 sw20 gt-s. 2002 glxi Lancer wagon (work hack)
next car - another a-dub please!
User avatar
FXGTV
Toyspeed Member
 
Posts: 1703
Joined: Tue Sep 06, 2005 7:57 pm
Location: Brisbane

Postby 85AW20v » Thu Mar 23, 2006 10:23 pm

You mean it's going in for an oil - I doubt there's anything at all to grease!!
See ya

Simon
85 MR2 20v
User avatar
85AW20v
Toyspeed Member
 
Posts: 1059
Joined: Fri May 24, 2002 6:18 pm
Location: Taupo, NZ

Postby FXGTV » Fri Mar 24, 2006 3:35 pm

Simon85MR220v wrote:You mean it's going in for an oil - I doubt there's anything at all to grease!!


Meh, ive always referred to it as an oil and grease ;)
1988 r31 TI Skyline.
1982 ra60 Celica (my Aussie Toyota and axle stand warrior).
ex: 1991 Corolla, 1989 fxgt-v, 1985 aw11. 1992 sw20 gt-s. 2002 glxi Lancer wagon (work hack)
next car - another a-dub please!
User avatar
FXGTV
Toyspeed Member
 
Posts: 1703
Joined: Tue Sep 06, 2005 7:57 pm
Location: Brisbane


Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 11 guests