Toyspeed.org.nz Message Board

by **Fortyone.co.nz** » Sat May 13, 2006 11:55 am

Morning everyone,

How about a JUN flywheel deal? JUN's flywheel's weigh in between 4.0kg and 8kg depending on the application (more likely around 4 or 5kg). Light weight flywheels have many benefits - reducing rotating mass so that the engine doesn't have to use as much of its own power to turn the critter, reducing overall car mass which improves handling, acceleration and fuel economy, and looks good on your car's CV when it comes time to sell Razz

We'll do them for NZ$595 - maybe a little more depending on application (please ask for confirmation). This is a huge saving on current prices, even with the NZ$ doing so poorly.

There's one catch - it's a 4 week delivery.

We are going to bring in some to hold in stock, so if you want one just let me know!

Applications for:
18RG
1GG/1GGT 9.0inch
1GGT 9.5inch
1JZ-GTE
2E
2ET
2ET / 4E(NA)
2JZ-GTE(NA)
2TG
3S-FE ST202 / ST203 / ST206
3SG ST162
3SG SW20 / ST183 / ST202
3SGT ST165
3SGT SW20 / ST185 / ST205
3SG SXE10
1G-FE GXE10
1ZZ-FE
1NZ-FE
1SZ-FE
2ZZ-GE ZZT231
4AG AE86 / AE92 (Early Model)
4AG AE92 (late model)/AE101
4AGZ AE92 (late model)/AE101
4AGZ AW11/AE92 (early model)
4E-FTE EP82/91
4K
5A-FE
5MG 9.5inch
7MGT

Done!

by **Fortyone.co.nz** » Thu May 18, 2006 2:32 pm

Today and tomorrow left for the JUN deal unless otherwise negotiated!

New Car Again · by **HELBND** » Thu May 18, 2006 2:34 pm

these will still be availabele at a later date, just not at sale price, right?

price and weight for 2zzge item?

by **scope** » Thu May 18, 2006 2:38 pm

do you get them for rotaries?

by **Fortyone.co.nz** » Thu May 18, 2006 2:52 pm

Yes sir! Here's the Mazda Line up:

12AT (Counter Weight [C/W] required)
13BT (C/W Required)
B6 / NA6CE
BP-ZE/BHA8P Familia
BP-ZE/NA8CE
KF-ZE Lantis

13BT is NZ$595, counterweight is NZ$245

by **Fortyone.co.nz** » Fri May 19, 2006 4:41 pm

Last day - it'd be fair to say that with the current exhange rate being under 68 that this kind of offer won't be around for a while now.

OMG so shiny! · by **Dell'Orto** » Thu Jun 15, 2006 7:38 pm

Do anyone other than JUN do 4K flywheels still?

by **Guest** » Thu Jun 15, 2006 7:54 pm

From our line up - I don't believe so. A popular brand these days would be Fidanza - or Exedy might make a flywheel (perhaps not lightened). I'll take a peek for you

by **Fortyone.co.nz** » Thu Jun 15, 2006 8:01 pm

Wow I posted as a guest! :?:

by **crnkin** » Sun Jun 18, 2006 8:17 pm

twice

by **Fortyone.co.nz** » Sat Sep 02, 2006 1:58 pm

Bump - this is on again. We've got 5 coming over - get in now =]

OMG so shiny! · by **Dell'Orto** » Sat Sep 02, 2006 7:26 pm

Are ya bringing over a 4K one?

by **matt dunn** » Sat Sep 02, 2006 10:09 pm

Looking for one to suit a 7A, (5A maybe the same),

Not sure on clutch size they run,
but I will need one to take a 212mm 20V clutch.?

Matt

by **Fortyone.co.nz** » Sun Sep 03, 2006 5:01 pm

Mmm, Boost wrote:Are ya bringing over a 4K one?

Sorry for the slow reply - no email update! =[ If one is bought then yes we'd bring one over (obviously) =] Keen?

matt dunn wrote:Looking for one to suit a 7A, (5A maybe the same),

Not sure on clutch size they run,
but I will need one to take a 212mm 20V clutch.?

Matt

You'd need to be sure of which will suit. JUN make them to bolt straight onto OEM items - so if you know a 20V plate will fit (OEM for OEM swap) then the JUN item will suit. Either that or try and email me a specifications diagram - mac@fortyone.co.nz

We've had some flywheels from JUN shoe-horned into some strange applications =]

by **Bazda** » Mon Sep 04, 2006 7:30 pm

matt dunn wrote:Looking for one to suit a 7A, (5A maybe the same),

Not sure on clutch size they run,
but I will need one to take a 212mm 20V clutch.?

Matt

This wont work you will need a custom one matt, i'm getting one made next week, maybe get 2 made and get a deal.. talk to u online about it.

by **matt dunn** » Mon Sep 04, 2006 8:50 pm

Yeah I know it's oddball and not OEM,
but was not sure if they were OEM spec or if you had acess to custom made ones.

by **no_8wire** » Mon Sep 04, 2006 9:54 pm

Im using a 4afe one on mine...212mm clutch etc...

by **Fortyone.co.nz** » Tue Sep 05, 2006 11:36 am

Yeah it's a pricey risk to 'guess' if a JUN will suit or not - best to get custom =] Good luck!

by **no_8wire** » Tue Sep 05, 2006 6:57 pm

Do you have one for a 4afe?

by **Fortyone.co.nz** » Tue Sep 05, 2006 9:07 pm

According to the list above - nope =[

Toyspeed.org.nz Message Board

JUN flywheel Sale

JUN flywheel Sale

Who is online