96 or 91 unleaded?

General discussions on all non technical car related topics

Moderator: The Mod Squad

Postby gmacrae » Mon Aug 07, 2006 8:02 pm

...but putting 98 in your stock bigport 4age is waste of money and gas. An engine designed for lower octane (87mon=about 91ron) will run better on the lower octane fuel, will have more power, and will get better mileage.

If you're running higher octane in your car than the manufacturer recommends, advance the timing a few degrees to make use of it, otherwise you'll just lose power and economy. Better yet, plane the head as well :)

As a rule tho, turbo or very high comp cars with knock sensors should always run as much octane as you can get your hands on. If the ecu doesnt detect any knock, it will let the timing run as advanced as the map will go and give you better power and economy.
User avatar
gmacrae
Toyspeed Member
 
Posts: 1194
Joined: Wed Nov 06, 2002 11:13 pm
Location: Rotorua

Postby Mr Revhead » Mon Aug 07, 2006 9:46 pm

yeah thats true, 9.4:1 is fine on 95
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby mr pad » Tue Aug 08, 2006 11:20 am

gmacrae wrote:...but putting 98 in your stock bigport 4age is waste of money and gas.


You rekon? If the timing was set to +12d then I have heard that it will make a fair bit of difference to performance etc. Besides im sure these motors would have been meant to run on 98 or 101 when they came out of the factory.
User avatar
mr pad
Toyspeed Member
 
Posts: 2707
Joined: Wed Nov 10, 2004 8:45 am
Location: Christchurch

Postby Mad Murphy » Wed Aug 09, 2006 10:16 pm

Hmm, mine seemed to run a lot better when I switched from 91 to 98.
1989 Supercharged AW11, 1981 Sprinter GT, 1991 Primera s**tmobile.

Facelift AW11 Parts Wanted!
User avatar
Mad Murphy
Toyspeed Member
 
Posts: 1313
Joined: Tue Feb 08, 2005 4:38 pm
Location: Rolleston

Postby Chickenman » Wed Aug 09, 2006 10:35 pm

Mad Murphy wrote:Hmm, mine seemed to run a lot better when I switched from 91 to 98.


But it would probably run the same on 95.
Baby Jesus
User avatar
Chickenman
I Am The Walrus!
 
Posts: 3554
Joined: Thu May 29, 2003 11:29 am
Location: CHCH

Postby gmacrae » Thu Aug 10, 2006 5:19 pm

mr pad wrote:
gmacrae wrote:...but putting 98 in your stock bigport 4age is waste of money and gas.


You rekon? If the timing was set to +12d then I have heard that it will make a fair bit of difference to performance etc. Besides im sure these motors would have been meant to run on 98 or 101 when they came out of the factory.


Set the timing up around 14-15 if you're gonna stick to 98, and you should get a bit more power out of it
User avatar
gmacrae
Toyspeed Member
 
Posts: 1194
Joined: Wed Nov 06, 2002 11:13 pm
Location: Rotorua

Postby Red_AE92 » Sun Aug 13, 2006 10:18 pm

basically if your car has knock sensors 91 will set them off and it will retard the ignition which means increased fule consumption and loss of power so yeh 96 will make your curren go alot better
User avatar
Red_AE92
Toyspeed Member
 
Posts: 46
Joined: Tue Jul 19, 2005 11:23 pm

Postby Red_AE92 » Sun Aug 13, 2006 10:21 pm

and putting 98 in your bigport isnt a waste as they are designed to run on high octane the only 4age designed to run on low octane is a blue top
User avatar
Red_AE92
Toyspeed Member
 
Posts: 46
Joined: Tue Jul 19, 2005 11:23 pm

Postby Mr Revhead » Sun Aug 13, 2006 10:23 pm

all TVIS 4ages are 9.4 compression
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby Red_AE92 » Sun Aug 13, 2006 10:25 pm

yeh i read some where that the only four age designed to run on low octane is the blue top maybe it doesnt have knock sensors i don't no but the newer ones need high octane be it a tvis red top smal port red top what ever
User avatar
Red_AE92
Toyspeed Member
 
Posts: 46
Joined: Tue Jul 19, 2005 11:23 pm

Postby NOLAW » Sun Aug 13, 2006 10:29 pm

what feul would you guys say to use in a 4agze (turbo)?
NOLAW
Toyspeed Member
 
Posts: 623
Joined: Sun Jan 01, 2006 4:26 pm
Location: whakatane

Postby Alex B » Sun Aug 13, 2006 10:31 pm

teh highest octaine you can find.
User avatar
Alex B
Toyspeed Member
 
Posts: 6539
Joined: Thu Nov 25, 2004 1:39 am
Location: London

Postby Red_AE92 » Sun Aug 13, 2006 10:31 pm

as high as you can go which is 98 from a petrol station because then it shouldnt affect the knocksensors and as mr rev head said ur ignition timing will be sped up as much as possible from that fuel
User avatar
Red_AE92
Toyspeed Member
 
Posts: 46
Joined: Tue Jul 19, 2005 11:23 pm

Postby NOLAW » Sun Aug 13, 2006 11:04 pm

oh yeh thought so :lol: :? :P
NOLAW
Toyspeed Member
 
Posts: 623
Joined: Sun Jan 01, 2006 4:26 pm
Location: whakatane

Postby Mad Murphy » Tue Aug 15, 2006 5:24 pm

Chickenman wrote:
Mad Murphy wrote:Hmm, mine seemed to run a lot better when I switched from 91 to 98.


But it would probably run the same on 95.

It seems to but 98 is what my local gas station sells so that's what I buy. I don't really give a crap about the extra few cents cus its not as if I drive the car more than once a week.
1989 Supercharged AW11, 1981 Sprinter GT, 1991 Primera s**tmobile.

Facelift AW11 Parts Wanted!
User avatar
Mad Murphy
Toyspeed Member
 
Posts: 1313
Joined: Tue Feb 08, 2005 4:38 pm
Location: Rolleston

Previous

Return to General Car Discussion

Who is online

Users browsing this forum: Bing [Bot] and 20 guests

cron