Toyspeed.org.nz Message Board

by **kpimpin61** » Sat Jul 21, 2007 1:46 pm

hey guys i have a 4age redtop 16v in my kp61 starlet was running mint bout a year ago then i decided to change suspension etc etc etc havent dicked round with the wiring the whole time now it doesnt go?

i have all the power feeds to the computer that i need but no spark no check engine light and the fuel pump only goes when the cars cranking(usually the fuel pump would stay on for a couple seconds after cranking if the motor did not start)

what you rekon guys?

by **ChaosAD** » Sat Jul 21, 2007 4:42 pm

getting power to the coil and injectors?

by **kpimpin61** » Sun Jul 22, 2007 11:36 am

yup theres power at the injectors and power to the coil but no spark?

by **gepsk8** » Sun Jul 22, 2007 7:20 pm

check coil.

by **kpimpin61** » Sun Jul 22, 2007 7:28 pm

tried another coil and ignitor but nothing
starting to get confusing now

by **Kender** » Sun Jul 22, 2007 11:06 pm

My guess is you've unplugged something during your etc etc work, and forgotten to plug it back in/plug it back in properly.

by **gepsk8** » Mon Jul 23, 2007 6:36 pm

hey, where in welly u located? u mind if i come have look?

by **jondee86** » Mon Jul 23, 2007 8:45 pm

Camshafts turn when you crank ??

Cheers... jondee86

by **kpimpin61** » Tue Jul 24, 2007 7:45 pm

the whole loom is plugged in its wired so theres a plug at the computer then a plug at the sensor thats all no plugs inbetween evrythings plugged in that needs to be

im in upper hutt what would you be looking at?

yeap camshafts turn it isnt running a top cam cover so easy to see, cam timing is spot on

by **gepsk8** » Tue Jul 24, 2007 8:31 pm

everything in way, hard to explain, pm if u want me to have look?

Toyspeed.org.nz Message Board

4age problem

4age problem

Lights on but no-one home...

Who is online