Toyspeed.org.nz Message Board

Toyota Club of New Zealand Message Board

Skip to content

-solved-

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Post a reply

-solved-

Postby Zyros » Fri Oct 12, 2007 11:20 pm

problem solved.
Last edited by Zyros on Tue Oct 16, 2007 8:29 pm, edited 1 time in total.
User avatar
Zyros
Toyspeed Member
 
Posts: 473
Joined: Mon Oct 31, 2005 9:52 pm
Location: Titirangi, West Auckland
Top

Postby Zyros » Sat Oct 13, 2007 10:36 am

bump, urgent.
User avatar
Zyros
Toyspeed Member
 
Posts: 473
Joined: Mon Oct 31, 2005 9:52 pm
Location: Titirangi, West Auckland
Top

Re: HELP<> Lost Main End Caps for crank

Postby Toymad » Sat Oct 13, 2007 11:00 am

Zyros wrote:Block's being honed, and surfaced etc.. can i get new end caps?? Or would i have to get a whole different block with the end caps and get that block recon.

If you were getting block work, normally you send the caps in with it. Have you checked with the reconditioner or do you know you did not send them in?

If I were getting a set of main caps from anywhere, I'd be getting the caps fitted to the block and then line bored. It makes sure that the caps are the right size and shape.

Might pay to mention the type of engine for those who don't know what you are after.

David
Toymad
Toyspeed Member
 
Posts: 283
Joined: Fri Jan 10, 2003 5:41 pm
Location: Auckland
Top

Postby Mr Revhead » Sat Oct 13, 2007 1:56 pm

yes if you loose the caps
you will need to get some 2nd hand ones and get it lined bored
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson
Top
Post a reply

Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 5 guests

Powered by phpBB® Forum Software © phpBB Group
Time : 0.016s | 11 Queries | GZIP : On