NZV8 utes - bet on a holden

General discussions on all non technical car related topics

Moderator: The Mod Squad

NZV8 utes - bet on a holden

Postby matt dunn » Fri Apr 04, 2008 10:43 pm

The new class, NZ V8 utes are running at timaru this weekend,

but there is a few issues with the falcons from what I understand.

The oil pumps in them are prone to failure at high rpm similar to what the XR6 T engine are, but there are higher quality oil pumps available in aussie like what we put into the focus.


But it seems that they haven't been done on the NZ one's.

At least 2 out of the 7 today failed, and caused terminal engine failures,
and it seems like the rest of the falcons are not not going to run untill they get new oil pumps ex aussie.
Apparantly they are on a plane on the way here for the morning,
but I doubt it will be a 5 min job to swap one of them.
7AGTE - DX20VT - viewtopic.php?t=59733
Discussion - viewtopic.php?t=59751
matt dunn
Toyspeed Member
 
Posts: 7109
Joined: Fri Sep 12, 2003 1:01 am
Location: Timaru

Postby fangsport » Sat Apr 05, 2008 8:36 am

heard the same thing last night.

wouldn't you be stoked to be a part of it.
utes arrived 2 weeks late, delivered 4 days before first event testing, allowing jack all time to signwrite and get to track, only to have engine failure with 5kms on the odo.

great way to start a new race series of really slow vehicles. couple with the fact it's raining down here, the ones that do start the first race will probably fence it.
I've been a bad bad boy. I should read the rules and behave before I get spanked by an admin

f#@k you i won't do what ya tell me

http://www.facebook.com/pages/Fangwood/225658970893404
fangsport
Toyspeed Member
 
Posts: 4169
Joined: Sun Nov 30, 2003 10:52 am
Location: Timaru

Postby Mr Revhead » Sat Apr 05, 2008 8:45 am

are the utes running not the ones they left here when they ran a year or too back?
or have they put different engines in them?
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby fangsport » Sat Apr 05, 2008 8:56 am

Mr Revhead wrote:are the utes running not the ones they left here when they ran a year or too back?
or have they put different engines in them?

i believe they are new from Aussie, but they may have granted dispensation to allow the older model to run to boost the entry..
I've been a bad bad boy. I should read the rules and behave before I get spanked by an admin

f#@k you i won't do what ya tell me

http://www.facebook.com/pages/Fangwood/225658970893404
fangsport
Toyspeed Member
 
Posts: 4169
Joined: Sun Nov 30, 2003 10:52 am
Location: Timaru

Postby jonno* » Sat Apr 05, 2008 12:01 pm

Is this going to be on tv tomorrow? watching v8 utes racing in the wet could be pretty funny
jonno*
Toyspeed Member
 
Posts: 59
Joined: Mon Nov 26, 2007 7:39 pm

Postby fangsport » Sat Apr 05, 2008 12:14 pm

jonno* wrote:Is this going to be on tv tomorrow? watching v8 utes racing in the wet could be pretty funny
will be televised but not sue of the date. won't be tomorrow, but there will be highlights on the news due to it being the first round and the amount of celebrity drivers.
I've been a bad bad boy. I should read the rules and behave before I get spanked by an admin

f#@k you i won't do what ya tell me

http://www.facebook.com/pages/Fangwood/225658970893404
fangsport
Toyspeed Member
 
Posts: 4169
Joined: Sun Nov 30, 2003 10:52 am
Location: Timaru

Postby fangsport » Sat Apr 05, 2008 8:55 pm

you can now add diff failure to the Fords, just as well a Holden shat an engine..........just to acheive some form of parity
I've been a bad bad boy. I should read the rules and behave before I get spanked by an admin

f#@k you i won't do what ya tell me

http://www.facebook.com/pages/Fangwood/225658970893404
fangsport
Toyspeed Member
 
Posts: 4169
Joined: Sun Nov 30, 2003 10:52 am
Location: Timaru

Postby matt dunn » Sat Apr 05, 2008 10:06 pm

fangsport wrote:you can now add diff failure to the Fords, just as well a Holden shat an engine..........just to acheive some form of parity



No sorry, get the facts straight, they had to pull the engine to fix the sump from where it hit the trees off the end of the back straight in qualifying, so that one get blamed on driver era rather than a holden failure.

Glad to see the fords all got new oil pumps flown out o/night from aussie and fitted them all this morning.
7AGTE - DX20VT - viewtopic.php?t=59733
Discussion - viewtopic.php?t=59751
matt dunn
Toyspeed Member
 
Posts: 7109
Joined: Fri Sep 12, 2003 1:01 am
Location: Timaru

Postby IH8TEC » Sat Apr 05, 2008 10:20 pm

now thats service 8O
Current Rides: 1994 Hiace Custom
KTM 250sx

Previous Car: 1988 Toyota Levin 4agte
234kw atw and 12.5@183kmh
Sold to a muppit who wrecked it
Hmm
User avatar
IH8TEC
Toyspeed Member
 
Posts: 3128
Joined: Wed Nov 26, 2003 7:11 pm

Postby fangsport » Sat Apr 05, 2008 10:22 pm

matt dunn wrote: No sorry, get the facts straight, they had to pull the engine to fix the sump from where it hit the trees off the end of the back straight in qualifying, so that one get blamed on driver era rather than a holden failure.
OK. thought it was the rattly sounding one when the came back in.
I've been a bad bad boy. I should read the rules and behave before I get spanked by an admin

f#@k you i won't do what ya tell me

http://www.facebook.com/pages/Fangwood/225658970893404
fangsport
Toyspeed Member
 
Posts: 4169
Joined: Sun Nov 30, 2003 10:52 am
Location: Timaru

Postby rollaholic » Sat Apr 05, 2008 10:23 pm

IH8TEC wrote:now thats service 8O


i dont get bits from ford that fast when they are in the country!
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby matt dunn » Sat Apr 05, 2008 10:29 pm

IH8TEC wrote:now thats service 8O


yeah but I bet you dont want to pay the freight bill,

Still probably cheaper than having to fork out for 7 new quad cam V8 mustang motors, or refund the 7 x 80K price tags for the utes.
7AGTE - DX20VT - viewtopic.php?t=59733
Discussion - viewtopic.php?t=59751
matt dunn
Toyspeed Member
 
Posts: 7109
Joined: Fri Sep 12, 2003 1:01 am
Location: Timaru

Postby rolla_fxgt » Sat Apr 05, 2008 10:54 pm

matt dunn wrote:
IH8TEC wrote:now thats service 8O


yeah but I bet you dont want to pay the freight bill,

Still probably cheaper than having to fork out for 7 new quad cam V8 mustang motors, or refund the 7 x 80K price tags for the utes.


And have them all switch to Holden & bitch to everyone how unreliable Ford utes are. They're basically stock aren't they?
Ending up with spare parts in assembling things since 1983
User avatar
rolla_fxgt
Toyspeed Member
 
Posts: 1641
Joined: Mon Nov 29, 2004 11:54 pm
Location: Rotorua

Postby matt dunn » Sat Apr 05, 2008 11:20 pm

rolla_fxgt wrote:
And have them all switch to Holden & bitch to everyone how unreliable Ford utes are. They're basically stock aren't they?


Knid of.

The Holdens are 6.0L Gen 4 V8's,
The fords are 4.6 Quad Cam mustang motors.


The engine's are mainly stock, but not out of the body shell they are in I dont think?

Matt
7AGTE - DX20VT - viewtopic.php?t=59733
Discussion - viewtopic.php?t=59751
matt dunn
Toyspeed Member
 
Posts: 7109
Joined: Fri Sep 12, 2003 1:01 am
Location: Timaru

Postby Mr Revhead » Sun Apr 06, 2008 10:12 am

so why did they screw with the setup the aussies had? thay had it pretty much sorted for parit/reliability!!
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby MR2SIK » Sun Apr 06, 2008 1:40 pm

matt dunn wrote:
Glad to see the fords all got new oil pumps flown out o/night from aussie and fitted them all this morning.


Thats some FATF shit right there :lol:
2011 Ford Mondeo tdci.

Hey, at least it sounds like a 3s.

1990 MR2 GT garage queen
User avatar
MR2SIK
Toyspeed Member
 
Posts: 2016
Joined: Tue Nov 25, 2003 9:30 pm
Location: Christchurch

Postby matt dunn » Sun Apr 06, 2008 9:02 pm

Mr Revhead wrote:so why did they screw with the setup the aussies had? thay had it pretty much sorted for parit/reliability!!


They are the same, well the new one's anyway,

there was also an updated AU in tha pack too aparantly.
7AGTE - DX20VT - viewtopic.php?t=59733
Discussion - viewtopic.php?t=59751
matt dunn
Toyspeed Member
 
Posts: 7109
Joined: Fri Sep 12, 2003 1:01 am
Location: Timaru

Postby neo » Mon Apr 07, 2008 2:00 pm

rollaholic wrote:
IH8TEC wrote:now thats service 8O


i dont get bits from ford that fast when they are in the country!


Get your bits (all be it in this case it was toys) ex Hong Kong. Track and trace updated at every point - 3.5 days door to door!
User avatar
neo
Toyspeed Member
 
Posts: 1965
Joined: Tue May 21, 2002 1:04 am
Location: Crazy Car Motorsport


Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 3 guests

cron