Rusty rust rust rust

General discussions on all non technical car related topics

Moderator: The Mod Squad

Rusty rust rust rust

Postby ollieboy » Fri Apr 11, 2008 4:33 pm

I was having a fiddle with my MR2 today and a piece fell off along the bottom of the doorsill. It did literally fall off, just dropped from the car. I was quite gutted because it revealed a gaping wound filled with what looks like space invader.(That old filling for homes, not the spacies game)

All I can see in my mind is huge amounts of cost to fix, which would piss me off as I probably can't afford it without dipping into my savings.

For the record, when I purchased the car I inspected this area and it was smooth as and did not look at all like there would be rust under there.

Image
Image

What would your suggestions be Toyspeed? To just bog it up? Or get it professionally fixed?

As an interim measure I have blasted it with heaps of fish oil to stem any further destruction.

Also, I discovered this about an hour ago and have been drinking beer ever since and whoring the internet - it has affected me greatly.

Cheers Toyspeed.
Ollie

Edit: That other bit of flaking to the left of the main patch was where I picked away with a screwdriver to try and gauge the coverage of rust.
User avatar
ollieboy
Toyspeed Member
 
Posts: 1824
Joined: Thu Oct 13, 2005 8:26 pm

Postby Bling » Fri Apr 11, 2008 4:49 pm

bogging it will not help anyone, as you just found out :(

looks like a pro job to me, f**k thats a hole aye!!! 8O :cry:

i'd grind the whole area to see how far it stretches, then look at getting it priced up with it all exposed.

Thats one very dodgy "repair" I have to say
User avatar
Bling
** Moderator **
 
Posts: 15990
Joined: Mon Dec 22, 2003 9:02 pm
Location: Quake City

Postby Snoozin » Fri Apr 11, 2008 5:00 pm

That's awesome! One time we used space invader and newspaper to repair a sill on a Datsun Sunny. I bet it looks like that now.

Replace with steel. Unfortunately that's a major, space invader absorbs moisture so I'd be cutting a decent chunk out of that to see if it's affected below the outer skin at all :?

Best of luck!
User avatar
Snoozin
Toyspeed Member
 
Posts: 2836
Joined: Sat Feb 14, 2004 6:35 pm
Location: Bribing WOF Testers.....

Postby ollieboy » Fri Apr 11, 2008 5:12 pm

Yeah, I thought it must be a job for a pro.

This really isn't what I need. :lol:

I guess I will have to ring around and find a place to get this looked at. Any good places you know of?
User avatar
ollieboy
Toyspeed Member
 
Posts: 1824
Joined: Thu Oct 13, 2005 8:26 pm

Postby Bling » Fri Apr 11, 2008 5:12 pm

I've heard of someone bogging over a loaf of bread, certainly wouldn't admit to that if it was me tho :lol:
User avatar
Bling
** Moderator **
 
Posts: 15990
Joined: Mon Dec 22, 2003 9:02 pm
Location: Quake City

Postby GTCRSHR » Fri Apr 11, 2008 5:14 pm

dam ... that is bad

grind all the bad metal out get rid of that space invader and weld new stuff in,

then sand the whole sill down and POR 15 it

that space invader shit will be a pain in the arse to get out


where abouts are you ? in auckland ? peter hendrix in mt wellington may be able to help you out
Nothing to see here ...
User avatar
GTCRSHR
Toyspeed Member
 
Posts: 1897
Joined: Thu Jan 16, 2003 2:14 pm
Location: Auckland NZ

Postby method » Fri Apr 11, 2008 5:18 pm

Epoxy the bit that fell off back on :lol:
PICS UPDATED DAILY
Evo IV - 13.0 @ 167.8 kph Full street trim - SOLD
Boosted 4age Ke30 - Im back and better than ever!
User avatar
method
Toyspeed Member
 
Posts: 1466
Joined: Thu Jul 01, 2004 5:58 pm
Location: West Auckland

Postby Alex B » Fri Apr 11, 2008 5:20 pm

Basicly, what you brought is an AW11. Cut it out, see how bad it is, if its too bad, look at reshelling the car. Take carpets out etc too, check the whole thing for rust, dont want to get that fixed and find other parts have cancer too. :x :evil:
User avatar
Alex B
Toyspeed Member
 
Posts: 6539
Joined: Thu Nov 25, 2004 1:39 am
Location: London

Postby ollieboy » Fri Apr 11, 2008 5:28 pm

The rest of the car is fine aye, over the last few months I have had it off the road and took time during that to remove the whole interior and check everything. Thats kinda why I'm so disappointed at this.

Method: I was considering that to tell the truth, out of sight, out of mind. :lol:
User avatar
ollieboy
Toyspeed Member
 
Posts: 1824
Joined: Thu Oct 13, 2005 8:26 pm

Postby Rick » Fri Apr 11, 2008 5:36 pm

I would also be looking how it rusted in the first place, it will be a most likely that it has been caused by a water leak which will be a 99% chance that has also been caused by rust. Try and find how the water is getting in.
Image
Corolla Levin AE-85 1984(Project car)
Corolla Runx Z (Runabout)
User avatar
Rick
Toyspeed Member
 
Posts: 1712
Joined: Fri Feb 06, 2004 6:52 pm
Location: West Auckland

Postby ollieboy » Fri Apr 11, 2008 5:39 pm

I would say it rusted originally because it's an AW11 and thats a factory option. :P
User avatar
ollieboy
Toyspeed Member
 
Posts: 1824
Joined: Thu Oct 13, 2005 8:26 pm

Postby Jdawg » Fri Apr 11, 2008 5:42 pm

Lol, it looks like the spider web is stopping the rest from falling off
Jdawg
Toyspeed Member
 
Posts: 637
Joined: Wed Nov 08, 2006 5:46 pm
Location: Auckland

Postby ollieboy » Fri Apr 11, 2008 5:54 pm

Ok, I just looked in the Yellow pages and found a few rust removal places, there was one 'New Brighton Rust removal and Budget Tyres.' I didn't like the sound of that tbh.

I rang a guy at a place called 'ACR corrosion repairs' I think its called. I gave him a detailed description and he has seen this before apparently so gave me a rough estimate on the phone which is so much better sounding then what I envisioned. Top guy.
User avatar
ollieboy
Toyspeed Member
 
Posts: 1824
Joined: Thu Oct 13, 2005 8:26 pm

Postby Snoozin » Fri Apr 11, 2008 5:57 pm

Take it in and show him, I'd say a phone quote would be about as accurate as a blind man playing darts.
User avatar
Snoozin
Toyspeed Member
 
Posts: 2836
Joined: Sat Feb 14, 2004 6:35 pm
Location: Bribing WOF Testers.....

Postby ollieboy » Fri Apr 11, 2008 5:59 pm

Oh yeah, I'm going in to show him as well but he gave me an estimate on what it would cost at the worst of the worst which I was happy with. I'm not silly enough to rely solely on that though :wink:
User avatar
ollieboy
Toyspeed Member
 
Posts: 1824
Joined: Thu Oct 13, 2005 8:26 pm

Postby Emperor » Fri Apr 11, 2008 6:01 pm

Snoozin wrote:Take it in and show him, I'd say a phone quote would be about as accurate as a blind man playing darts.


Agreed!!
Cant remember what it was, but rang up for a quote, and thought sweet, got olds to drop it in while I was at work.. Went in to pay bill after. Almost twice what I was quoted!!
facebook.com/zeroclearanceswag
User avatar
Emperor
Toyspeed Member
 
Posts: 4815
Joined: Wed May 12, 2004 1:14 am
Location: Hamilton

Postby Dell'Orto » Fri Apr 11, 2008 6:49 pm

It wont be that hard to fix, just a matter of grinding it all back to see how bad it is then plating it. I had a MK2 Escort with much much worse sills than that.
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby Truenotch » Fri Apr 11, 2008 8:02 pm

Thats still mint :P , just bog it up and wait for 6 months. Then fix it propperly. That gets rid of the need for an angle grinder cause the water cuts it out for you :o ... well thats what I did anyway, just makes it worse. Not that hard to do propperly.
User avatar
Truenotch
Toyspeed Member
 
Posts: 1960
Joined: Sun Jan 09, 2005 3:41 pm
Location: Hamilton

Postby Mr Revhead » Fri Apr 11, 2008 8:11 pm

take off the trim on the rear of the rear pillar
i think you will find a hole there.
AW11s rust under that trim, the resulting hole leaks water inside the frame, and rusts out where you just found your grand canyon.

its an AW11 it IS rusting in other places. thats what they do.
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby ollieboy » Fri Apr 11, 2008 8:20 pm

I can't seem to see anything. Is it at the very bottom in the corner? Or am I looking in the wrong place?
User avatar
ollieboy
Toyspeed Member
 
Posts: 1824
Joined: Thu Oct 13, 2005 8:26 pm

Next

Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 27 guests