alarm question

Phat beats and out-of-luck crooks. Again, read the Disclaimer first.

Moderator: The Mod Squad

alarm question

Postby fx gt » Thu Apr 17, 2008 9:15 pm

putting a fusion alarm into my corolla
have one problem

i have a wire that goes to the door switches, so that when any 4 doors are opened the alarm goes of :lol:

but where do all the 4 door open/closed switches meet up?
fx gt
Toyspeed Member
 
Posts: 1667
Joined: Wed Jan 12, 2005 6:43 pm

Postby soopachargen » Thu Apr 17, 2008 11:15 pm

look for a red with white trace in your drivers kick panel, this should do all your doors, if not you can usually take it from what im guessing will also be a red with white trace running down the a pillar from the interior light.
The wire will go to earth when the door is open, i test this with a test light by connecting one end to 12v power and then the other to the door wire... it should light your light up with each door you open.
When in doubt, down and out.

"This is the Internet, it has no sympathy and shows no mercy. It feeds on weakness and preys on sensitivity. It will e-kill you at the first opportunity. Be brave or be e-dead." - NZHONDAS
User avatar
soopachargen
Toyspeed Member
 
Posts: 1598
Joined: Thu Aug 05, 2004 1:54 pm
Location: Silverdale


Return to Car Audio / Security

Who is online

Users browsing this forum: No registered users and 4 guests

cron