coil packs

[ke_25]

het just bout to purchase coil packs for 4agte, and woundering what people are running?

will be unning g3 link, havent purchased igniter as yet looking into best options, or amy one run wasted spark?

cheers shsun

[strx7]

mitsi twin cam W/S coil packs from a 4G63/4G67 or similar with the corrosponding ignitor

[Crampy]

Same with me. I'm using a EVO3 ignitor and will be running some Mitsi coils I got from Pick A Part for $11 Cheap cheap.
At the moment it's go the stock 4AGZE coil packs, but I'll be changing to the Mitsi coils, so I can use my MSD leads.
This is with a Link V5.

[Distrb]

I'm running Galant coils and igniter, with a Link G3.

I'm sure you can run the Link igniter, or the mitsi one, up to you

[ke_25]

kool thanks for reply,

[tsoob]

$&#$% that man run bosch individual coils, mine has a smaller turbo than a lot of other guys and makes as much power, i put a lot of it down to the coils, you should come check out the car on saturday at our dyno day.

[ke_25]

wat coils you running? ive ceen evo coild run on alot of higher powered motors, esp in the orig 4g63 abdstill coping

[tsoob]

they are individual bosch coil packs, they came with the microtech computer, evo ones are good, the individual ones will make more tho.

[ke_25]

are you running a lt10 or link

[tsoob]

lt 10, 194.4 kw on 16psi with moe to come on sat after new head goes on.

[ke_25]

oh ok, thats prity good, im tossing between link and lt10, heading down link path i think.

[Crampy]

$&#$% that man run bosch individual coils, mine has a smaller turbo than a lot of other guys and makes as much power, i put a lot of it down to the coils, you should come check out the car on saturday at our dyno day.

I'd put that down to the tune or the dyno rather than just the coils.

[tsoob]

$&#$% that man run bosch individual coils, mine has a smaller turbo than a lot of other guys and makes as much power, i put a lot of it down to the coils, you should come check out the car on saturday at our dyno day.

I'd put that down to the tune or the dyno rather than just the coils.

yep tune plays a huge part, but the massie spark and gap on the plugs really helps. took a fair bit of timing out of it also, runs pretty sedate off boost then whammo it hits limit before it stops making power.

[IH8TEC]

it's not gonna make much more power, like crampy said, it's mainly a tune not coils, mitsi coils are very good, and provide a very strong spark, thing with individual coils is you dont have to run wasted spark. but thats a minor difference unless you got sh1t tonnes of power.

[ChaosAD]

Does anyone know what leads will fit a silvertop and evo coils?
Was told generic ones would work but would prefer to use proper twin cam ones.
Are the evo, gsr or diamante ones the right length/diameter?

[Crampy]

Does anyone know what leads will fit a silvertop and evo coils?
Was told generic ones would work but would prefer to use proper twin cam ones.
Are the evo, gsr or diamante ones the right length/diameter?

I'm using a set of MSD leads for a B16A Honda motor. They're a good length, so I can put the coils away from the head. The mitsi coils will let you use pretty much any lead, without that stupid clip like the 20V leads and W/S 4AGZE leads have.

[ChaosAD]

Is the tube on the leads that goes down the center of the head the right length/diameter? or do you need to trim it up?

[Distrb]

use set of eagle leads. part no. E74295. fits both the 20v head and mitsi coils perferctly, whilst giving you plenty of lead length too..

[ChaosAD]

Wicked, thanks for that Distrb

[bluemaumau]

who has eagle leads?