4age altenator

IKE86 · Post by **IKE86** » Mon Dec 01, 2008 9:54 am

#1 goes straight to the battery
#2+3 go to a dash plug i think so im guessing 1 of them is an exciter and the other is the dash light but im not sure which 1

matt dunn · Post by **matt dunn** » Mon Dec 01, 2008 3:02 pm

IKE86 wrote:#1 goes straight to the battery
#2+3 go to a dash plug i think so im guessing 1 of them is an exciter and the other is the dash light but im not sure which 1

Should be a diagram on the side with S I and L,
Sensing, Ignition, and Light

1 is sensing, Batt +ve
2 is light, warning light terminal
3 is ignition, switched 12V from the ign switch to turn the alt on and off.

mr30%jr · Post by **mr30%jr** » Mon Dec 01, 2008 5:19 pm

http://www.clubadub.co.nz/forum/viewtopic.php?f=4&t=10

l1ttle_d3vil · Post by **l1ttle_d3vil** » Mon Dec 01, 2008 5:22 pm

Not sure if you have the original plug or not, but if you do:

thick white is the Batt feed
black/yellow is your Ign feed
creamy yellow is the warning light feed

mr30%jr · Post by **mr30%jr** » Mon Dec 01, 2008 6:19 pm

l1ttle_d3vil wrote:Not sure if you have the original plug or not, but if you do:

thick white is the Batt feed
black/yellow is your Ign feed
creamy yellow is the warning light feed

colours change thru the years.

l1ttle_d3vil · Post by **l1ttle_d3vil** » Mon Dec 01, 2008 6:33 pm

mr30%jr wrote:
l1ttle_d3vil wrote:Not sure if you have the original plug or not, but if you do:

thick white is the Batt feed
black/yellow is your Ign feed
creamy yellow is the warning light feed

colours change thru the years.

good point - the above is for a 16v 4age.

IKE86 · Post by **IKE86** » Mon Dec 01, 2008 6:41 pm

l1ttle_d3vil wrote:Not sure if you have the original plug or not, but if you do:

thick white is the Batt feed
black/yellow is your Ign feed
creamy yellow is the warning light feed

Cool i do have it and thats what i wanted to hear

rwd_mayhem · Post by **rwd_mayhem** » Wed Dec 10, 2008 11:42 am

l1ttle_d3vil wrote:Not sure if you have the original plug or not, but if you do:

thick white is the Batt feed
black/yellow is your Ign feed
creamy yellow is the warning light feed

sorry to bring up an old thread but........

my colours are different. I have 1 thick cream, 1 thick cream with green stripe and a thin black with yellow strip.

Do you know what my ones are? my charge light comes on when running, not sure if it is actually charging or not though.

mr30%jr · Post by **mr30%jr** » Wed Dec 10, 2008 1:49 pm

mr30%jr wrote:http://www.clubadub.co.nz/forum/viewtopic.php?f=4&t=10

see above link

l1ttle_d3vil · Post by **l1ttle_d3vil** » Wed Dec 10, 2008 4:46 pm

rwd_mayhem wrote:Do you know what my ones are? my charge light comes on when running, not sure if it is actually charging or not though.

above link should cover it, otherwise have you got a multimeter? if so, chuck that on the batt while its running. should be around 13 - 14v if its charging. will be alot lower if its not.

are the wires all different thicknesses?
on my plug, all three were obviously different gauge wire.
PM me if you still have problems.

Toyspeed

4age altenator

4age altenator

Re: 4age altenator