Toyspeed.org.nz Message Board

by **xsspeed** » Sun Dec 21, 2008 8:23 pm

Hey guys

Was playing with the 2e engine again today. Got me thinking...Just wondering what parts are interchangeable between the different engines?

Like can a 4e crank be used in a 2e?

Cheers

by **QikStarlie** » Sun Dec 21, 2008 10:19 pm

should be able to use crank and rods as block is very similar if not the same, just 4e has 1mm bigger bore. haven't tryed either of the above myself tho.

4e = bored out 2e
5e = bored out 3e

1e is a special powerhouse of its own

can't bore out 2e/3e and use 4e/5e pistons as wont work with 12v head

by **xsspeed** » Mon Dec 22, 2008 8:51 am

Do you have any specs on the 4efte crank? Are they hollow like the 2e ones?

The 4e head is twincam 16V right?

by **QikStarlie** » Mon Dec 22, 2008 9:17 am

not sure on crank specs, but never hear of anyone having any issues with them. the 4efte crank has "4et" cast onto it so must be different in some way. ran over 170kw and near 8000rpm thru my old one,

yeh twin cam 16. very similar setup to 4afe head setup.

by **xsspeed** » Mon Dec 22, 2008 9:40 am

Hmm might have a look into this for lol's.

Do you know anything about the 2e-t EP71 starlets? I see there is one on trademe atm

by **1I1** » Mon Dec 22, 2008 11:48 am

xsspeed wrote:Hmm might have a look into this for lol's.

Do you know anything about the 2e-t EP71 starlets? I see there is one on trademe atm

Mate has a Turbo-S EP71. Been through one or two engine rebuilds and ended up putting a 4EFTE in as the 2ET was getting hard to get good pistons etc. Good motor for what they are but 4E ftw

by **ee904age** » Mon Dec 22, 2008 3:22 pm

PM Dotdog, he knows plenty about 2E-T's, might even have his one for sale

by **1I1** » Mon Dec 22, 2008 3:27 pm

ee904age wrote:PM Dotdog, he knows plenty about 2E-T's, might even have his one for sale

I thought he blew his up and was having to rebuild it/had rebuilt it. I wouldn't have thought he'd sell the starlet!

by **xsspeed** » Mon Dec 22, 2008 3:34 pm

Not his one for sale on trademe is it?

From what I have seen a lot of sprintcar guys do/use to use 2e's.

Will have to do some research/play around with parts etc

by **1I1** » Mon Dec 22, 2008 4:40 pm

xsspeed wrote:Not his one for sale on trademe is it?

From what I have seen a lot of sprintcar guys do/use to use 2e's.

Will have to do some research/play around with parts etc

Meaning this one http://www.trademe.co.nz/Trade-Me-Motor ... 170097.htm if so that's not his one

by **ee904age** » Mon Dec 22, 2008 5:35 pm

Last I heard it was dereged/ getting dereged, has cancer in the roof. Not sure what state the motor is in

Toyspeed.org.nz Message Board

E series engines interchangable parts?

E series engines interchangable parts?

Who is online