What Do You Do to stop your red paint from fading

General discussions on all non technical car related topics

Moderator: The Mod Squad

Postby MR2BOY23 » Sun Mar 15, 2009 8:04 pm

Dell'Orto wrote:
MR2BOY23 wrote:
79rolla wrote:just be cerful if you get cut and polish, you can only do it so many times befour you get to the undercote (my brother did it to my car befour i got it)
would sending it somewhere to get profeshonail cu and polish and a clere cote work?


Cut and Polish is harmless


Its not harmless, it does take a layer off ;) If you're not careful it can go through the top coat.


Depends what you use. Something like a fine cut cleaner isnt as abrasive as others
MR2BOY23
Toyspeed Member
 
Posts: 1500
Joined: Tue Nov 11, 2008 11:30 am
Location: Hong Kong

Postby celica_xr9145 » Sun Mar 15, 2009 8:56 pm

MR2BOY23 wrote:
Dell'Orto wrote:
MR2BOY23 wrote:
79rolla wrote:just be cerful if you get cut and polish, you can only do it so many times befour you get to the undercote (my brother did it to my car befour i got it)
would sending it somewhere to get profeshonail cu and polish and a clere cote work?


Cut and Polish is harmless


Its not harmless, it does take a layer off ;) If you're not careful it can go through the top coat.


Depends what you use. Something like a fine cut cleaner isnt as abrasive as others


What do you recommend? a lot of people use autoglym
www.Garage-X.org - Car Awesomeness
Facebook.com/garagexnz - Now on FB!!

95' Zenki Silvia S14, 99' BMW 328i E46
User avatar
celica_xr9145
Toyspeed Member
 
Posts: 808
Joined: Wed Dec 10, 2008 12:36 pm
Location: Upper Hutt, Wellington

Postby Dell'Orto » Sun Mar 15, 2009 10:12 pm

MR2BOY23 wrote:
Dell'Orto wrote:
MR2BOY23 wrote:
79rolla wrote:just be cerful if you get cut and polish, you can only do it so many times befour you get to the undercote (my brother did it to my car befour i got it)
would sending it somewhere to get profeshonail cu and polish and a clere cote work?


Cut and Polish is harmless


Its not harmless, it does take a layer off ;) If you're not careful it can go through the top coat.


Depends what you use. Something like a fine cut cleaner isnt as abrasive as others


Yep, but I wouldnt make a sweeping statement about a product to someone who might not know better ;)
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby Prymal » Mon Mar 16, 2009 9:45 am

First - Mothers claybar.

Second - meguiars cleaner wax/paint restorer

third - meguiars polish

third - turtlewax Platinum canuba wax paste

fourth - NXT polish or Turtlewax ice

= 8 hours of work on a cool day - brings back a 15 YO red Group A to sparkly shiney again

maintain with mothers showtime
wash with NXT car wash + meguiars lambswool washing mitt
Dry with Mothers Miracle cloth ( the blue microfiber one )
Prymal
Toyspeed Member
 
Posts: 726
Joined: Thu Jul 13, 2006 11:17 pm
Location: Auckland

Postby MR2BOY23 » Mon Mar 16, 2009 10:45 am

classique71 wrote:First - Mothers claybar.

Second - meguiars cleaner wax/paint restorer

third - meguiars polish

third - turtlewax Platinum canuba wax paste

fourth - NXT polish or Turtlewax ice

= 8 hours of work on a cool day - brings back a 15 YO red Group A to sparkly shiney again

maintain with mothers showtime
wash with NXT car wash + meguiars lambswool washing mitt
Dry with Mothers Miracle cloth ( the blue microfiber one )


NXT polish over turtlewax ice anyday. Turtle wax ice feels so synthetic and fake
MR2BOY23
Toyspeed Member
 
Posts: 1500
Joined: Tue Nov 11, 2008 11:30 am
Location: Hong Kong

Postby Prymal » Mon Mar 16, 2009 11:02 am

agreed - though i have that now - using it up before i go NXT :)
Prymal
Toyspeed Member
 
Posts: 726
Joined: Thu Jul 13, 2006 11:17 pm
Location: Auckland

Postby celica_xr9145 » Mon Mar 16, 2009 9:35 pm

thanks for all the help everyone.

Im going to go down supercheap auto this weekend and get some decent paintwork restorer and polish and spend all day on it.

Will get some pics up :wink:
www.Garage-X.org - Car Awesomeness
Facebook.com/garagexnz - Now on FB!!

95' Zenki Silvia S14, 99' BMW 328i E46
User avatar
celica_xr9145
Toyspeed Member
 
Posts: 808
Joined: Wed Dec 10, 2008 12:36 pm
Location: Upper Hutt, Wellington

Postby MR2BOY23 » Mon Mar 16, 2009 10:05 pm

celica_xr9145 wrote:thanks for all the help everyone.

Im going to go down supercheap auto this weekend and get some decent paintwork restorer and polish and spend all day on it.

Will get some pics up :wink:


Well done for going to supercheap auto
MR2BOY23
Toyspeed Member
 
Posts: 1500
Joined: Tue Nov 11, 2008 11:30 am
Location: Hong Kong

Postby celica_xr9145 » Mon Mar 16, 2009 10:07 pm

MR2BOY23 wrote:
celica_xr9145 wrote:thanks for all the help everyone.

Im going to go down supercheap auto this weekend and get some decent paintwork restorer and polish and spend all day on it.

Will get some pics up :wink:


Well done for going to supercheap auto


or repco, wherever i get the best deal :wink:
www.Garage-X.org - Car Awesomeness
Facebook.com/garagexnz - Now on FB!!

95' Zenki Silvia S14, 99' BMW 328i E46
User avatar
celica_xr9145
Toyspeed Member
 
Posts: 808
Joined: Wed Dec 10, 2008 12:36 pm
Location: Upper Hutt, Wellington

Postby Prymal » Tue Mar 17, 2009 6:02 pm

2x votes repco - especially if you see me ;)
Prymal
Toyspeed Member
 
Posts: 726
Joined: Thu Jul 13, 2006 11:17 pm
Location: Auckland

Postby Alex B » Tue Mar 17, 2009 6:10 pm

Not everyone lives in Auckland belive it or not. :P
User avatar
Alex B
Toyspeed Member
 
Posts: 6539
Joined: Thu Nov 25, 2004 1:39 am
Location: London

Postby MR2BOY23 » Tue Mar 17, 2009 10:06 pm

classique71 wrote:2x votes repco - especially if you see me ;)


Which repco do you work at !
MR2BOY23
Toyspeed Member
 
Posts: 1500
Joined: Tue Nov 11, 2008 11:30 am
Location: Hong Kong

Postby Heylin » Tue Mar 17, 2009 10:35 pm

goto the nz mr2 club and look up my sticky under the sw20 section. I have a full guide there on how to resttore paint. I too had the red problem, 1990 had a uv stabliser fault you can slow down the problem but eventually youll need a re spray. I polished my car weekly and it needed a respray after about 4 years.
Heylin
Heylin
Toyspeed Member
 
Posts: 682
Joined: Sun Mar 23, 2003 11:37 am

Postby Eddy1612 » Wed Mar 18, 2009 4:21 pm

79rolla wrote:just be cerful if you get cut and polish, you can only do it so many times befour you get to the undercote (my brother did it to my car befour i got it)
would sending it somewhere to get profeshonail cu and polish and a clere cote work?


ever thought about working on oyur spelling a bit more?

just wax dude. red fades but you can prolong it heaps with waxing
Eddy1612
Toyspeed Member
 
Posts: 234
Joined: Thu Jul 10, 2008 3:27 pm
Location: Kura

Postby MR2BOY23 » Wed Mar 18, 2009 7:46 pm

Eddy1612 wrote:
79rolla wrote:just be cerful if you get cut and polish, you can only do it so many times befour you get to the undercote (my brother did it to my car befour i got it)
would sending it somewhere to get profeshonail cu and polish and a clere cote work?


ever thought about working on oyur spelling a bit more?

just wax dude. red fades but you can prolong it heaps with waxing


Its a forum not an essay lol 43/49 for spelling though dude
MR2BOY23
Toyspeed Member
 
Posts: 1500
Joined: Tue Nov 11, 2008 11:30 am
Location: Hong Kong

Postby frost » Wed Mar 18, 2009 8:49 pm

Eddy1612 wrote:
79rolla wrote:just be cerful if you get cut and polish, you can only do it so many times befour you get to the undercote (my brother did it to my car befour i got it)
would sending it somewhere to get profeshonail cu and polish and a clere cote work?


ever thought about working on oyur spelling a bit more?

just wax dude. red fades but you can prolong it heaps with waxing


haha fail,
frost
Toyspeed Member
 
Posts: 1705
Joined: Mon Aug 08, 2005 11:19 pm

Postby tsoob » Mon Mar 23, 2009 9:52 am

MR2BOY23 wrote:
Dell'Orto wrote:
MR2BOY23 wrote:
79rolla wrote:just be cerful if you get cut and polish, you can only do it so many times befour you get to the undercote (my brother did it to my car befour i got it)
would sending it somewhere to get profeshonail cu and polish and a clere cote work?


Cut and Polish is harmless


Its not harmless, it does take a layer off ;) If you're not careful it can go through the top coat.


Depends what you use. Something like a fine cut cleaner isnt as abrasive as others


If you got the car professionally cut, and then waxed with a machine and you waxed it every 2 weeks by hand you will see a dramatic drop in this fade, when you buff with a machine is is far more effective than a hand cut as it heats the paint and removes the oxidation a lot better. the consistant waxing will keep the paint with a protective coat over it.
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
User avatar
tsoob
Toyspeed Member
 
Posts: 3253
Joined: Tue Dec 05, 2006 7:37 pm
Location: 201.1kw on 19psi

Postby mr2low » Mon Mar 23, 2009 7:48 pm

i have a red arch that needs replacing, so i thought i give something funny a go BRASSO, and $&#$% me dead, hand applied with a soft, buffed by hand and it looked new. Then sealed with Meguiar's number 51 yellow carnauba wax. the car is parked outside 24/7 so i'll see how long it lasts
mr2low
Toyspeed Member
 
Posts: 46
Joined: Fri Aug 01, 2008 10:01 pm

Postby celica_xr9145 » Wed Mar 25, 2009 8:07 pm

I might do that, get a second hand buffer off trade me, i used some CRC Wax but didnt get the protector and polish, came out ok but i dont think it will last.
Thanks for all the advice 8)
www.Garage-X.org - Car Awesomeness
Facebook.com/garagexnz - Now on FB!!

95' Zenki Silvia S14, 99' BMW 328i E46
User avatar
celica_xr9145
Toyspeed Member
 
Posts: 808
Joined: Wed Dec 10, 2008 12:36 pm
Location: Upper Hutt, Wellington

Previous

Return to General Car Discussion

Who is online

Users browsing this forum: Majestic-12 [Bot] and 34 guests