Toyspeed.org.nz Message Board

by **frost** » Tue Sep 29, 2009 11:11 pm

any one use a late model 7afe head gasket in a 20v blacktop before?
i remember reading it was a 3 layer steal .6mm item
some one used it in there race car to up the comp ratio.

ive got a new 7afe gasket but no blacktop one to compare it to,

by **matt dunn** » Wed Sep 30, 2009 12:09 am

sounds like it's the same as the TRD gaskets?

by **frost** » Wed Sep 30, 2009 1:42 am

yeah that's what i was hoping for, and much cheaper too at $60

if only i kept my blacktop HG to compare but it was rubbish day

if some one has a old blacktop head gasket they want to send to me(shipping is on me) i can get this confirmed.

by **Bazda** » Wed Sep 30, 2009 2:18 am

A TRD 20v gasket is 0.8mm thick.

Also the 7afe one wont work, the holes for the coolant will be wrong.

by **Mr Revhead** » Wed Sep 30, 2009 7:51 am

as above
it is not the same a TRD gasket
some holes do not line up the same.
I posted side by side pics on toymods a few years ago
searching for 7afe gasket should bring it up

by **frost** » Wed Sep 30, 2009 11:24 pm

i saw that post on toymods, is that a late model 7afe gasket you looked at? 98+ because my 7afe gasket does not look the same to that one,
and there was only one oil hole that was slightly out,

im so bloody angry i binned my old gasket :evil:

by **Mr Revhead** » Thu Oct 01, 2009 7:30 am

was that long ago i cant remember...
did i post up the part numbers?

by **AceSniper** » Thu Oct 01, 2009 1:28 pm

i have a 7afe one here and a TRD one if I can find a alright cam Ill get pics, from memory some holes are smaller and could be made bigger?

by **Mr Revhead** » Thu Oct 01, 2009 1:35 pm

http://www.toymods.net//forums/showthre ... light=7afe

theres the toymods thread

Toyspeed.org.nz Message Board

7afe HG in 20v blacktop

7afe HG in 20v blacktop

Who is online