jobs that shouldnt take that long but something goes wrong

General discussions on all non technical car related topics

Moderator: The Mod Squad

Postby andyztouring » Tue Dec 29, 2009 10:55 am

Sick Puppy wrote:Stupidest five minute job was replacing bulbs on a mate's Mondeo- bulb covering is held in place with a wire coat hanger style clip. As I was putting the bulb in, the clip came out... five minute job took three hours of trying to get the fricking clip back into the mounting...

4AGE engines were nightmares to get filters off- trying to get the filter by reaching under the 'warm' exhaust manifold. :evil:

That, and the next job I'm looking forward to is replacing the sunroof motor on the Curren- only tool four years to find the information on the internet, since not a single mechanic/ panelbeater/ electrician wanted to touch it... looks to be an easy enough job lol
The sunroof job-
That job will be easy,drop the headliner,undo the drain tubes on each corner of sunroof frame,undo wires,undo all bolts holding sunroof to car roof,take out of car,remove motor ,change over motor,lube all cables etc,test everything works with allen key inserted in motor drive,then reassemble.
andyztouring
Toyspeed Member
 
Posts: 276
Joined: Mon Sep 27, 2004 11:25 pm
Location: Rangiora

Postby FLAWLES » Tue Dec 29, 2009 11:26 am

jzx100 HID bulb covers

three out of the four screws are easily undone, the last one is hidden behind the fender

out comes teh hole lamp assy
User avatar
FLAWLES
Toyspeed Member
 
Posts: 1856
Joined: Sat Oct 11, 2003 11:26 am
Location: Hamilton

Postby Sick Puppy » Wed Dec 30, 2009 1:21 am

andyztouring wrote:
Sick Puppy wrote:... the next job I'm looking forward to is replacing the sunroof motor on the Curren- only tool four years to find the information on the internet, since not a single mechanic/ panelbeater/ electrician wanted to touch it... looks to be an easy enough job lol

The sunroof job- that job will be easy,drop the headliner,undo the drain tubes on each corner of sunroof frame,undo wires,undo all bolts holding sunroof to car roof,take out of car,remove motor ,change over motor,lube all cables etc,test everything works with allen key inserted in motor drive,then reassemble.


yeah, that is pretty much my plan... talk to the experts though and you'd think I'd asked them to perform brain surgery... from the looks of it it should be a job of a few hours tops, so why am I getting told either 'no way jose' or 'about $800 + parts'? Either way, they don't want the job... :?

How do you get the A & B Pillar panel covers off? I take it they are clipped on, so (carefully) lever them off?
Project thread here

Discussion thread here
Sick Puppy
Toyspeed Member
 
Posts: 829
Joined: Fri Jun 17, 2005 10:29 pm
Location: Sydney

Postby andyztouring » Wed Dec 30, 2009 7:39 am

Sick Puppy wrote:
andyztouring wrote:
Sick Puppy wrote:... the next job I'm looking forward to is replacing the sunroof motor on the Curren- only tool four years to find the information on the internet, since not a single mechanic/ panelbeater/ electrician wanted to touch it... looks to be an easy enough job lol

The sunroof job- that job will be easy,drop the headliner,undo the drain tubes on each corner of sunroof frame,undo wires,undo all bolts holding sunroof to car roof,take out of car,remove motor ,change over motor,lube all cables etc,test everything works with allen key inserted in motor drive,then reassemble.


yeah, that is pretty much my plan... talk to the experts though and you'd think I'd asked them to perform brain surgery... from the looks of it it should be a job of a few hours tops, so why am I getting told either 'no way jose' or 'about $800 + parts'? Either way, they don't want the job... :?

How do you get the A & B Pillar panel covers off? I take it they are clipped on, so (carefully) lever them off?

Yes they are clipped,the A pillar has a hook at the bottom which usually hooks into dashboard,start unclipping at top and work down.
andyztouring
Toyspeed Member
 
Posts: 276
Joined: Mon Sep 27, 2004 11:25 pm
Location: Rangiora

Postby Boosted_162 » Sat Jan 02, 2010 11:37 am

Worst job was a clutch job in my RC. Planned to do it over the 4 days of easter..... 9 months later its still not finished :lol: :lol:
Current:
1996 KZN185 Hilux Surf
2008 Mazda2
Boosted_162
Toyspeed Member
 
Posts: 3624
Joined: Sun Sep 04, 2005 1:02 am
Location: Kaukapakapa

Postby jakesae101 » Sun Jan 17, 2010 9:19 am

i have another to add to the list nothing went wrong we just underestermated time loudtoy said ive changed gearboxes before its easy as onece you get evrythn out of the way it will only take a couple of hours fastforward 10 hours later and we were done putting the lsd box in my trueno
I appologise for my bad grammar

www.hccc.org.nz

Current. AE92 GTZ the weekend warrior racecar project HERE!
EX. Ae85-aka the rustbucket or the dirty85
EX. MK2 escort 4 door 1300cc
EX. MK1 escort 2 door rs 2000 replica
EX. AE101 trueno gt apex
User avatar
jakesae101
Toyspeed Member
 
Posts: 1178
Joined: Sun Nov 23, 2008 4:20 pm
Location: welly

Postby thornz » Sun Jan 17, 2010 9:56 am

HFH on a MR2, who would have though replacing a bit of coolant hose could take soo much time/effort :lol:
User avatar
thornz
Toyspeed Member
 
Posts: 1436
Joined: Sat May 25, 2002 1:36 pm
Location: Christchurch

Postby iOnic » Sun Jan 17, 2010 10:09 am

thornz wrote:HFH on a MR2, who would have though replacing a bit of coolant hose could take soo much time/effort :lol:


and skin 8O
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby Brick » Sun Jan 17, 2010 11:47 am

putting an engine back together when half your bolts have been stolen :cry:
User avatar
Brick
I know Kung Fu
 
Posts: 2695
Joined: Thu Feb 24, 2005 7:41 pm
Location: ChCh

Postby Mr Revhead » Sun Jan 17, 2010 11:48 am

Brick wrote:putting an engine back together when half your bolts have been stolen :cry:


Hmmm and I have bought a car in kit set form that I have never worked on before.... and I bet half the bolts aren't even there.... :?
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby Bling » Sun Jan 17, 2010 11:57 am

In my experience, you only need half the bolts anyway.... well going by the number i've had left over the years :lol: :oops:
User avatar
Bling
** Moderator **
 
Posts: 15990
Joined: Mon Dec 22, 2003 9:02 pm
Location: Quake City

Postby captain crescent » Mon Jan 18, 2010 9:51 pm

funny thing that i work as a mechanic and i always see the other mechanics dropping bolts in to one of the many boxes of nuts and bolts sitting in a corner in the work shop then half an hour later they are scraping through the boxes looking for those bolts lol DUH!!!!!
Budweiser is a gay beer. if it isn't a gay beer Sam why are you trying to put it up my arse.
User avatar
captain crescent
Toyspeed Member
 
Posts: 269
Joined: Fri Jan 01, 2010 10:35 am
Location: Palmerston North

Previous

Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 35 guests