hey there guys and gals. Im wanting to get a few bits and pieces polished including inlet plenum, CAS cover, and rocker cover.
Who does this in wellington and has anyone have anyone they would reccomend?
Matt
021 297 1754
Alloy polishing - recomendations?
Moderator: The Mod Squad
9 posts
• Page 1 of 1
Alloy polishing - recomendations?
by XSVWGN » Tue Feb 02, 2010 11:48 pm
tt132 Corona wagon. 2jzgte project
ae100 wagon 4agte 358kw monster - SOLD
2008 Kia rio - work car
ae100 wagon 4agte 358kw monster - SOLD
2008 Kia rio - work car
-
XSVWGN - Toyspeed Member
- Posts: 1977
- Joined: Tue Mar 30, 2004 8:45 pm
- Location: Tawa, Wellington
by headshotnz » Wed Feb 03, 2010 1:00 am
hahaha, give it to some one who knows what there doing 
Polished mine again tonight, i could see my relection!
Polished mine again tonight, i could see my relection!
Current: UCF20 NZ New LS400,
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)
Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
- headshotnz
- Toyspeed Member
- Posts: 699
- Joined: Thu Oct 30, 2008 7:39 pm
- Location: Johnsonville
by XSVWGN » Wed Feb 03, 2010 9:34 am
headshotnz wrote:hahaha, give it to some one who knows what there doing
Polished mine again tonight, i could see my relection!
rocker cover is all sanded back sunshine
just want to get all my bits and pieces done properly
Matt
tt132 Corona wagon. 2jzgte project
ae100 wagon 4agte 358kw monster - SOLD
2008 Kia rio - work car
ae100 wagon 4agte 358kw monster - SOLD
2008 Kia rio - work car
-
XSVWGN - Toyspeed Member
- Posts: 1977
- Joined: Tue Mar 30, 2004 8:45 pm
- Location: Tawa, Wellington
by XSDRIFT » Thu Feb 04, 2010 2:25 pm
For polishing all I will say is AutoSol and a Rag.
I've been trying to get mine on the Silvia all polished up... what a mission!! Found it real hard to get deep enough to get all the dimples out and get down to a smooth surface. Finally getting there but wouldn't do it again!
The biggest issue is the sanding. Once its smooth a bit of autosol and a rag and it comes up like a mirror.
I've been trying to get mine on the Silvia all polished up... what a mission!! Found it real hard to get deep enough to get all the dimples out and get down to a smooth surface. Finally getting there but wouldn't do it again!
The biggest issue is the sanding. Once its smooth a bit of autosol and a rag and it comes up like a mirror.
-
XSDRIFT - Toyspeed Member
- Posts: 25
- Joined: Mon Feb 01, 2010 2:55 pm
- Location: Wellington
by 1I1 » Thu Feb 04, 2010 2:53 pm
If the part is smooth but painted/covered in grime, you could try getting it chemically cleaned then use autosol as xsdrift mentioned. I had a local engine builder chemically clean/strip my rocker cover when i went to get it painted. Came up mint.
Official TGP and TRD supplier to Toyspeed
TRD Clicky >>Here
mark@manawatu.toyota.co.nz (Please mention Toyspeed)
TRD Clicky >>Here
mark@manawatu.toyota.co.nz (Please mention Toyspeed
)-
1I1 - Toyspeed Sponsor
- Posts: 3063
- Joined: Mon Oct 01, 2007 6:55 pm
- Location: Palmerston North
by Dell'Orto » Thu Feb 04, 2010 5:55 pm
Chemically cleaning something will get all the built up gunk off it, but it wont flatten off surface imperfections which is what you need to do to polish stuff.
Depending on how bad it is, start off with 400 grit and work up to 1500-2000grit then autosol, it'll look like a mirror.
Depending on how bad it is, start off with 400 grit and work up to 1500-2000grit then autosol, it'll look like a mirror.
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!
Quint wrote:Not just cock, large cock.
-
Dell'Orto - ** Moderator **
- Posts: 17494
- Joined: Tue Jul 08, 2003 5:07 am
- Location: Straight out the ghetto, Lower Hutt
Crazy Car Motorsport
by XSVWGN » Thu Feb 04, 2010 11:25 pm
pretty much just wanted to give it to someone and have them do it for me 
so are there any polishers in wellington? other wise i will just get my polishing shoes on and give it a nudge
Matt
so are there any polishers in wellington? other wise i will just get my polishing shoes on and give it a nudge
Matt
tt132 Corona wagon. 2jzgte project
ae100 wagon 4agte 358kw monster - SOLD
2008 Kia rio - work car
ae100 wagon 4agte 358kw monster - SOLD
2008 Kia rio - work car
-
XSVWGN - Toyspeed Member
- Posts: 1977
- Joined: Tue Mar 30, 2004 8:45 pm
- Location: Tawa, Wellington
by Crucible » Sat Feb 06, 2010 8:32 pm
hey matt,
Like dellorto suggests use 1500 - 2000 grit WETTED out and wrap it around a flat block or piece of wood on flat surfaces and really get into it. The idea is to get the surface as flat as possible (Like a glass surface) thats when you will acheve the best shine.
then finish off with autosol and it will look like a mirror, I have a small buffing wheel you can borrow. Getting stuff polished = $$$
btw Ill have my tig sorted tues mate so will sort those bits for yah asap.
Like dellorto suggests use 1500 - 2000 grit WETTED out and wrap it around a flat block or piece of wood on flat surfaces and really get into it. The idea is to get the surface as flat as possible (Like a glass surface) thats when you will acheve the best shine.
then finish off with autosol and it will look like a mirror, I have a small buffing wheel you can borrow. Getting stuff polished = $$$
btw Ill have my tig sorted tues mate so will sort those bits for yah asap.
-
Crucible - Real Life Mechanic
- Posts: 1438
- Joined: Sun Jul 17, 2005 2:46 am
- Location: Wellington
9 posts
• Page 1 of 1
Return to Wellington / Lower North Island Region
Who is online
Users browsing this forum: No registered users and 3 guests