ST202 manual gearbox filling...

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

ST202 manual gearbox filling...

Postby peas » Sat Apr 10, 2010 5:16 pm

Hello all.

I have noticed that my girlfriends Celica seems to sound "dry" from the box and its shifting isn't what I would call smooth. Anyway I undid the 24mm bung on the front of it and poked in a curled over piece of metal and didn't manage to get it into any oil (none on it when I pulled my make believe dipstick back out anyway) so I'm assuming that it is dry or close to it and is it correct to fill it until it comes level with the filling bung... as in just starts seeping out?

Thanks guys.
'97 Caldina GT (ST215G)
User avatar
peas
Toyspeed Member
 
Posts: 398
Joined: Wed Feb 16, 2005 11:30 am
Location: North Shore

Postby Quint » Sat Apr 10, 2010 5:37 pm

Yeap, might as well drain it, then fill it back up till its at the bung.
User avatar
Quint
Toyspeed Member
 
Posts: 1251
Joined: Tue May 24, 2005 2:24 pm

Postby iOnic » Sat Apr 10, 2010 5:39 pm

Yup correct. I normally leave the filler open and fill it from the top (speedo sender/reverse sensor) until it starts to seep out the side.
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby peas » Sat Apr 10, 2010 5:40 pm

Sweet cheers guys... will throw some oil in it tomorrow.
'97 Caldina GT (ST215G)
User avatar
peas
Toyspeed Member
 
Posts: 398
Joined: Wed Feb 16, 2005 11:30 am
Location: North Shore

Postby peas » Sun Apr 11, 2010 5:34 pm

How much ar they meant to take?!?!? It swallowed up a 1L bottle and a quarter of the 2nd one!!!
'97 Caldina GT (ST215G)
User avatar
peas
Toyspeed Member
 
Posts: 398
Joined: Wed Feb 16, 2005 11:30 am
Location: North Shore

Postby iOnic » Sun Apr 11, 2010 5:43 pm

Did you drain it? You aren't really supposed to mix old/new oil. They're just under 3 liters from memory.
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby Bling » Sun Apr 11, 2010 6:46 pm

Yeah mixing could be a bad idea if that's what you did. Who knows what grade of oil is in there to start with as well.
User avatar
Bling
** Moderator **
 
Posts: 15990
Joined: Mon Dec 22, 2003 9:02 pm
Location: Quake City

Postby sergei » Sun Apr 11, 2010 8:03 pm

Mixing is bad especially in gearbox oil as they could use different chemistry in their friction additives for synchros that could react together.
User avatar
sergei
Mad Russian
 
Posts: 8406
Joined: Wed May 15, 2002 12:06 pm
Location: North Shore

Postby peas » Sun Apr 11, 2010 11:30 pm

Noted... thanks guys will drain and sort it out with totally new oil.
'97 Caldina GT (ST215G)
User avatar
peas
Toyspeed Member
 
Posts: 398
Joined: Wed Feb 16, 2005 11:30 am
Location: North Shore


Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 9 guests