cars with single window wipers

General discussions on all non technical car related topics

Moderator: The Mod Squad

cars with single window wipers

Postby Boost_4_Life » Sun May 30, 2010 7:37 pm

i'm needing to know which cars run single window wipers that wipe the whole screen.... i know there are some out there...

i'm wanting to modify my wiper on the starlet. Currently centre mounted but as its standard motor it only wipes drivers side of the screen. Need to change it to something like the second car in this clip: http://www.youtube.com/watch?v=YqujKzDrgwY So wondering if i can just use a motor off a road car that has a similar setup. Are there any out there that wipe the whole screen with 1 wiper???
'83 KP starlet rally car, 20v powa!

The rally beast
The rally beast again!
User avatar
Boost_4_Life
Toyspeed Member
 
Posts: 1328
Joined: Thu Mar 06, 2003 5:47 pm
Location: Somewhere on a sweet gravel road

Postby duddley » Sun May 30, 2010 7:43 pm

i remember years ago the old mans 86 prelude had a centre window wiper
i don't club seals..... only sandwiches
duddley
Toyspeed Member
 
Posts: 1082
Joined: Fri Feb 06, 2009 10:32 am
Location: auckland

Postby Boosted_162 » Sun May 30, 2010 7:43 pm

Fiat Uno does i think?
Current:
1996 KZN185 Hilux Surf
2008 Mazda2
Boosted_162
Toyspeed Member
 
Posts: 3624
Joined: Sun Sep 04, 2005 1:02 am
Location: Kaukapakapa

Postby Mr Revhead » Sun May 30, 2010 7:44 pm

It's not to do with the motor, rather the lever on the linkages.
You could possibly modify the exsisting one to do it, make it longer.
But why? It will be less effective. That said if you put a faster motor on it you may regain some of the loss in performance
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby Dell'Orto » Sun May 30, 2010 7:46 pm

Mercs do, also Subaru Vortex's do too :lol:
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby Mr Revhead » Sun May 30, 2010 7:47 pm

Dell'Orto wrote:Mercs do, also Subaru Vortex's do too :lol:


Hmmmmmmm... Could be a lesson in that!
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby Emperor » Sun May 30, 2010 7:47 pm

Ill ask the old man when I next see him, he done my RX7 wiper, one wiper does whole screen. Standard RX7 motor
facebook.com/zeroclearanceswag
User avatar
Emperor
Toyspeed Member
 
Posts: 4815
Joined: Wed May 12, 2004 1:14 am
Location: Hamilton

Postby atmosports » Sun May 30, 2010 8:24 pm

Pretty much any out of a hatch will work, used starlet/civic ones before depending on the available room to mount one
atmosports
Toyspeed Member
 
Posts: 569
Joined: Fri Jul 04, 2003 7:52 pm
Location: Auckland,New Zealand

Postby Boost_4_Life » Sun May 30, 2010 9:12 pm

hmm true ok cheers guys. id rather have the standard 2 wipers, but seeing as the previous owner decided to go to trouble of welding up the old holes etc it becomes more of a nightmare.

its only cos co driver moans she cant see out the window in the rain! pffttt.... just shut up and read the notes woman :roll:
'83 KP starlet rally car, 20v powa!

The rally beast
The rally beast again!
User avatar
Boost_4_Life
Toyspeed Member
 
Posts: 1328
Joined: Thu Mar 06, 2003 5:47 pm
Location: Somewhere on a sweet gravel road

wiper

Postby fxgt race » Sun May 30, 2010 9:47 pm

I use the rear one in the front and use one wiper, only thing is you only have one speed.

http://www.youtube.com/watch?v=_KiKxHMdoL0

Video off it working,I used a smaller wiper blade so you could get more coverage with a standard blade, still i think ya co driver still won't be happy
Pukekohe 1.07.6
Taupo 1.41.3
Manfield 1.18.7
hamptondowns 1.15.2
User avatar
fxgt race
Toyspeed Member
 
Posts: 484
Joined: Thu Jul 17, 2003 12:14 am

Postby fuel » Sun May 30, 2010 10:38 pm

Isuzu Piazza
Fiat Uno up to about 92-93 shape
Mercedes Benz W124 series
Subaru XT
Honda Prelude 2nd gen 83-88
LOUD NOISES!!!
User avatar
fuel
Toyspeed Member
 
Posts: 1532
Joined: Sun Jan 25, 2004 1:59 pm
Location: Brisbane Australia

Postby 85AW20v » Sun May 30, 2010 10:55 pm

Mr Revhead wrote:It's not to do with the motor, rather the lever on the linkages.
You could possibly modify the exsisting one to do it, make it longer.


What he said - but probably shortening the link on the bottom of the central mount would give you more coverage.
See ya

Simon
85 MR2 20v
User avatar
85AW20v
Toyspeed Member
 
Posts: 1059
Joined: Fri May 24, 2002 6:18 pm
Location: Taupo, NZ

Postby Mr Revhead » Sun May 30, 2010 10:59 pm

Well, I knew what I meant :lol:
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby 85AW20v » Sun May 30, 2010 11:01 pm

Yeah I know you did - but did he?
See ya

Simon
85 MR2 20v
User avatar
85AW20v
Toyspeed Member
 
Posts: 1059
Joined: Fri May 24, 2002 6:18 pm
Location: Taupo, NZ

Postby Mr Revhead » Sun May 30, 2010 11:03 pm

Probably better than us once he pulls it apart and has a play :D
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby Malcolm » Sun May 30, 2010 11:51 pm

85AW20v wrote:
Mr Revhead wrote:It's not to do with the motor, rather the lever on the linkages.
You could possibly modify the exsisting one to do it, make it longer.


What he said - but probably shortening the link on the bottom of the central mount would give you more coverage.

or lengthening the arm on the motor will also work
User avatar
Malcolm
Toyspeed Member
 
Posts: 4631
Joined: Tue May 14, 2002 1:01 am
Location: Auckland

Postby Truenotch » Mon May 31, 2010 12:11 am

Just move it on the gear and then bolt it back down. I assume you're using the middle spline and it's in the standard position? Undo the bolt, rotate it up so it's sitting slightly on the passengers side and bolt it back up. If it hits something, repeat the process until it's clear.

I did it to my starlet before taking it for a play at Manfeild and daily drove it like that until it went up for sale. It works fine and you don't notice the wiper on the screen. The best part is that it's free.

Image

The 86 is the same:
Image

See it wiping here http://www.youtube.com/watch?v=boNVs-9561E
User avatar
Truenotch
Toyspeed Member
 
Posts: 1960
Joined: Sun Jan 09, 2005 3:41 pm
Location: Hamilton

Postby frost » Mon May 31, 2010 12:24 am

oh dude im loving the gold on polish,


sorry op for spam,
frost
Toyspeed Member
 
Posts: 1705
Joined: Mon Aug 08, 2005 11:19 pm

Postby rollaholic » Mon May 31, 2010 8:46 am

yep best delete that pic before this turns into a hachi fanboi thread...

PS, you win at ae86s <3
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby Boost_4_Life » Mon May 31, 2010 9:02 am

Truenotch wrote:stuff


ive got it mounted dead centre/vertical at the moment. i'll try rotating it slighty as per yours, as long it it clears enough of my side tho. like the guys above say, if i shorten/lengthen the arm i might be able to get it to sweep the whole screen = win.
'83 KP starlet rally car, 20v powa!

The rally beast
The rally beast again!
User avatar
Boost_4_Life
Toyspeed Member
 
Posts: 1328
Joined: Thu Mar 06, 2003 5:47 pm
Location: Somewhere on a sweet gravel road


Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 26 guests