Side exit exhaust

Burning questions of the day answered by the Toyspeed populace

Moderator: The Mod Squad

Do it?

No
9
16%
Yes
40
71%
Akane's grip > your grip
7
13%
 
Total votes : 56

Side exit exhaust

Postby iOnic » Thu Oct 14, 2010 4:42 pm

Been toying with the idea since I can't have the exhaust out the back for various reasons. Thought I might cut up some scrap bits of steel today and see what I think of it.

If I do go for it, the pipes will be properly slash cut stainless with a stainless heatshield of some description riveted to the skirt. The car may also be washed. Possibly.

Thoughts?

Image
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby touge_ae101 » Thu Oct 14, 2010 4:45 pm

would be awesome to see! flames out the side would be epic cool! is the seperate pipe for a possible screamer?
User avatar
touge_ae101
Toyspeed Member
 
Posts: 1730
Joined: Mon Sep 14, 2009 7:23 pm
Location: Palmerston North

Postby 1I1 » Thu Oct 14, 2010 4:45 pm

Be good to see a decent side photo but going off the photo above it looks tough! Two wastegate pipes?
Official TGP and TRD supplier to Toyspeed
TRD Clicky >>Here
mark@manawatu.toyota.co.nz (Please mention Toyspeed ;))
User avatar
1I1
Toyspeed Sponsor
 
Posts: 3063
Joined: Mon Oct 01, 2007 6:55 pm
Location: Palmerston North

Postby iOnic » Thu Oct 14, 2010 4:46 pm

Yep 2 wastegate dumps. One off each wastegate (twin entry turbine) and a single 3" turbo dump. I'll try and get a better picture of it at some point over the weekend
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby iamawesome » Thu Oct 14, 2010 4:53 pm

side pipes are about as cool as it gets.
iamawesome
Toyspeed Member
 
Posts: 204
Joined: Wed Sep 22, 2010 9:04 pm
Location: north shore

Postby rx7guy » Thu Oct 14, 2010 5:03 pm

do it. hard
The torque band is wide and the road is narrow
User avatar
rx7guy
Toyspeed Member
 
Posts: 246
Joined: Sat Aug 20, 2005 3:01 pm
Location: Christchurch

Postby Emz » Thu Oct 14, 2010 5:06 pm

+1 for do it
Image
'97 Supra RZ - Click Here! | Discussion thread - Click Here
User avatar
Emz
Miss Supra Princess
 
Posts: 822
Joined: Sat Jul 01, 2006 8:02 pm
Location: Auckland

Postby Bling » Thu Oct 14, 2010 5:07 pm

Voted for do it.

Can't merge the wastes into the main? Tidier imo
User avatar
Bling
** Moderator **
 
Posts: 15990
Joined: Mon Dec 22, 2003 9:02 pm
Location: Quake City

Postby iOnic » Thu Oct 14, 2010 5:28 pm

Haven't really looked into it tbh :lol: But merging them into the downpipe just after the turbine should make life a little easier for me and possibly quieten the thing down a tiny, insignificant bit
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby touge_ae101 » Thu Oct 14, 2010 6:55 pm

might pay to look at fabricating the rear bit of the sideskirt out of stainless to try stop everything from melting. would look pretty cool too IMO. looks pretty simple to copy the profile of the side skirt and weld up.
User avatar
touge_ae101
Toyspeed Member
 
Posts: 1730
Joined: Mon Sep 14, 2009 7:23 pm
Location: Palmerston North

Postby iOnic » Thu Oct 14, 2010 7:57 pm

I'll be making a stainless steel heat shield on both the outside and inside of the sideskirt. I don't really wanna do anything too drastic because I'm sorta expecting the sideskirts to get smashed up/damaged fairly often with the car being so low so it's easier to repair them if I keep them mostly fibreglass
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby d1 mule » Thu Oct 14, 2010 8:16 pm

there are rules governing the distance the exhaust has to exti behind the rear most door, i think itssomewhere from 200-300mm from memory, which may be hard on the mr2 but apart from that DO IT!!!!!!!!!!!!
d1 mule
Toyspeed Member
 
Posts: 1790
Joined: Sun Dec 18, 2005 9:32 pm
Location: perth, WA

Postby Leon » Thu Oct 14, 2010 8:35 pm

ground clearance will not be your friend

You will probably find that you flatten your exhaust pipe on a semi regular basis between the sill and things like car park ramps
User avatar
Leon
Toyspeed Member
 
Posts: 6642
Joined: Wed Feb 26, 2003 6:27 pm
Location: Wellington

Postby iOnic » Thu Oct 14, 2010 8:54 pm

Ground clearance and I stopped being friends a long time ago.

Image

d1 mule wrote:there are rules governing the distance the exhaust has to exti behind the rear most door, i think itssomewhere from 200-300mm from memory, which may be hard on the mr2 but apart from that DO IT!!!!!!!!!!!!


As far as I can tell from reading the VIRM there is no requirement for a specific distance from the rear most door. Aside from the usual noise level, I can't have them exiting on the left side of the vehicle for obvious reasons.
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby duddley » Thu Oct 14, 2010 9:22 pm

I thought the distance was from the rear most opening window, would look nicer if you merged the two wastegate pipes into one the same size as your exhaust piping
i don't club seals..... only sandwiches
duddley
Toyspeed Member
 
Posts: 1082
Joined: Fri Feb 06, 2009 10:32 am
Location: auckland

Postby Bling » Thu Oct 14, 2010 9:53 pm

iOnic wrote:Ground clearance and I stopped being friends a long time ago.


Shit that's low :lol:

Mine is 'low' but looks high which is gay, but I can barely get up my drive as it is....already hitting it at a 45..... how do you even drive it that low? :lol:
User avatar
Bling
** Moderator **
 
Posts: 15990
Joined: Mon Dec 22, 2003 9:02 pm
Location: Quake City

Postby touge_ae101 » Thu Oct 14, 2010 10:26 pm

obviously you avoid the square like a plague, there is no way you could get through some of those potholes like that ^^ :o
User avatar
touge_ae101
Toyspeed Member
 
Posts: 1730
Joined: Mon Sep 14, 2009 7:23 pm
Location: Palmerston North

Postby Elmendorf » Fri Oct 15, 2010 7:26 am

touge_ae101 wrote:obviously you avoid the square like a plague, there is no way you could get through some of those potholes like that ^^ :o


Its easy avoid driving around Palmy full stop. Luckily I had the fore thought to buy a house with a flat driveway, no angles onto the road, just an ever so slight bump into the garage.

I vote do it, especially since there is zero room out the back for your exhaust and it does look cool.
User avatar
Elmendorf
Toyspeed Member
 
Posts: 2174
Joined: Tue Jul 22, 2003 11:51 pm
Location: Lurking where you can't find me

Postby rollaholic » Fri Oct 15, 2010 7:44 am

do it

bonus points for boso pipes
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby Leon » Fri Oct 15, 2010 7:46 am

http://www.nzta.govt.nz/resources/virm- ... xhaust.pdf
Page # 3
Reason For Rejection copy/paste from VIRM
5. The exhaust system is so constructed that emitted heat or fumes are likely to harm vehicle occupants, eg the exhaust gases are not directed away from the perimeter of the vehicle’s passenger compartment.


The exhaust photo you've got as an example looks to be directed away from the perimiter of the vehicles passenger compartment. Should be legal if it's not going to poison you, be too loud, or maim pedestrians.
User avatar
Leon
Toyspeed Member
 
Posts: 6642
Joined: Wed Feb 26, 2003 6:27 pm
Location: Wellington

Next

Return to Polls

Who is online

Users browsing this forum: No registered users and 6 guests