Toyspeed.org.nz Message Board

by **hsmidy** » Sat Feb 12, 2011 8:24 pm

Hey

so in short i have found a set of wheels that a company called rota wheels make that i want, but after looking through most of the on the net that sell mags none of them stock rota wheels.

so the question is who in NZ stock rota wheels?

by **Mr Ree** » Sat Feb 12, 2011 10:57 pm

Rotas seem to be listed on trade me quite alot a few months back. Not sure who imports them though, if anyone at all.

by **cogent** » Sat Feb 12, 2011 11:29 pm

dude on nzhondas used to bring them in

by **themaleman** » Sun Feb 13, 2011 12:23 pm

i got mine from bazda id say he would know

by **hsmidy** » Sun Feb 13, 2011 1:09 pm

cheers guys i'll try nzhonda, is bazda on this forum?

by **iOnic** » Sun Feb 13, 2011 1:55 pm

profile.php?mode=viewprofile&u=200

Website · by **Luke - BZG** » Sun Feb 13, 2011 5:33 pm

They seem to have a bad reputation?

by **hsmidy** » Sun Feb 13, 2011 6:09 pm

First ive heard of it, but never mind as it turns out the set of wheels that i was keen on only come out in 4x100.... no good for my celica

might have to get a set of koya rims instead (ssr xr4 look alikes)

Website · by **Emperor** » Sun Feb 13, 2011 6:17 pm

Or just get SSR? lol

Website · by **Bling** » Sun Feb 13, 2011 6:33 pm

But why buy the real rims when for next to nothing can get copies of unknown quality?

Emperor, your idea makes no sense :lol:

by **hsmidy** » Sun Feb 13, 2011 8:01 pm

its a little hard to get 15x10 xr4 ssr's....unless you know of some just laying around

Website · by **Bling** » Sun Feb 13, 2011 8:02 pm

Can you get copies @ 15x10? thats hoooge :lol:

by **hsmidy** » Sun Feb 13, 2011 8:04 pm

no but why buy banged up and curbed ssr's when you can get a set of new (although only lookalikes) for 1200 and have them widened 2 inches

Website · by **Bling** » Sun Feb 13, 2011 8:06 pm

What are they going on?

by **hsmidy** » Sun Feb 13, 2011 8:07 pm

73 celica

Website · by **Mr.Phreak** » Sun Feb 13, 2011 9:14 pm

Safety first

by **tsoob** » Sun Feb 13, 2011 9:23 pm

There was a guy who had some limited sets, but he was not bringing them in, he was on trademe,

As far as I know there is no one in nz importing such wheels.

by **wde_bdy** » Sun Feb 13, 2011 9:24 pm

hsmidy wrote:no but why buy banged up and curbed ssr's when you can get a set of new (although only lookalikes) for 1200 and have them widened 2 inches

Genuine 3 piece? If not then you can't get them legally widened anyway.

Callum

by **tsoob** » Sun Feb 13, 2011 11:50 pm

wde_bdy wrote:
hsmidy wrote:no but why buy banged up and curbed ssr's when you can get a set of new (although only lookalikes) for 1200 and have them widened 2 inches

Genuine 3 piece? If not then you can't get them legally widened anyway.

Callum

not to mention the lack of quality over the genuine items...

by **Bazda** » Mon Feb 14, 2011 8:30 am

I used a set of Rota GT3 rims and they were really nice. Had them on the car for nearly 2 years track use only. Sold them off as needed something to clear my new brakes. Got some new Rota Circuit 10s now.

Quality wasnt really an issue at all with them. Even had a massive rock get jammed behind the caliper and spoke of the mag. Nothing wrong with the mag at all!, bent lug mounts on the HUB!! Just a graze behind one of the spokes.

I actually haven't heard of anyone breaking a Rota, that pic was on an American car forum, the guy actually ran into a MASSIVE pot hole and then the story just got exaggerated.

Toyspeed.org.nz Message Board

Where to get rota wheels

Where to get rota wheels

Who is online