Passenger Window

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Passenger Window

Postby Anton » Tue Jul 12, 2011 9:05 am

Hi. The passenger window of my Celica does not want to go down. When I press the open button, nothing happens, not even a whirring sound of the window's motor making an effort. The driver's window works fine. Can any fellow member direct me to a good place where this can be fixed. I think this will involved removing the inner door panel so would prefer a place where they do a careful job. I live in Panmure so some place near would be great, otherwise I wouldn't mind going further for a good job done. Cheers to all. Anton
2003 Red Celica
1998 Sprinter Marino
Anton
Toyspeed Member
 
Posts: 35
Joined: Thu Mar 05, 2009 11:32 am
Location: Auckland

Postby strx7 » Tue Jul 12, 2011 11:39 am

pull the trim off, put power directly to the regulator motor to make sure it works, if it doesn't the regulator/motor is buggered, if it works, the problem is either in the LH door switch or in the RH switch
Online Car Forums - Where Hui seems to take preference over Do-ey

HDJ81- 112AWKW @ 10psi), FC3S (Tarmac Spec 335rwhp@11psi), 3SGTE stroker - replacement body found.

Motorsport Bay of Plenty - http://www.mbop.org.nz
strx7
Toyspeed Member
 
Posts: 3707
Joined: Mon May 24, 2004 12:06 am
Location: Tauranga

Postby Mr.Phreak » Tue Jul 12, 2011 1:08 pm

No one has knocked the window lock switch??

Dunno if it affects the drivers window on that model.
Image
User avatar
Mr.Phreak
Toyspeed Member
 
Posts: 2700
Joined: Wed Jan 26, 2005 6:10 pm
Location: Gisborne

Postby rollaholic » Tue Jul 12, 2011 1:28 pm

^ would be the first thing to check
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby Anton » Tue Jul 12, 2011 4:38 pm

Hi Mr. Phreak. There is no window lock switch. There are only three buttons in the center panel. The left and right ones to operate the windows and the center one to lock/unlock the doors. Cheers.
2003 Red Celica
1998 Sprinter Marino
Anton
Toyspeed Member
 
Posts: 35
Joined: Thu Mar 05, 2009 11:32 am
Location: Auckland

Postby blindnz » Tue Jul 12, 2011 4:56 pm

Mine came of the pulley once, worked only half way for a bit until it stopped.
Couldnt hear the motor or anything, once I pulled the door card off, it was clear it had jumped the pulley and got jammed.
Motor still worked ok.


Speaking of this, the drivers one in the ceres the wire seems to keep coming of the bottom pulley.
I've replaced the whole assembly but its fallen of the new assembly aswell.
User avatar
blindnz
Toyspeed Member
 
Posts: 970
Joined: Tue Aug 18, 2009 3:43 pm
Location: Auckland

Postby Anton » Tue Jul 12, 2011 5:04 pm

So do you guys think any mechanic can do this, or do I have to bring to a specialized shop?
2003 Red Celica
1998 Sprinter Marino
Anton
Toyspeed Member
 
Posts: 35
Joined: Thu Mar 05, 2009 11:32 am
Location: Auckland

Postby strx7 » Tue Jul 12, 2011 5:32 pm

any mechanic or auto sparky or any tom dick and harry with some mechanical know how
Online Car Forums - Where Hui seems to take preference over Do-ey

HDJ81- 112AWKW @ 10psi), FC3S (Tarmac Spec 335rwhp@11psi), 3SGTE stroker - replacement body found.

Motorsport Bay of Plenty - http://www.mbop.org.nz
strx7
Toyspeed Member
 
Posts: 3707
Joined: Mon May 24, 2004 12:06 am
Location: Tauranga


Return to Tech Questions

Who is online

Users browsing this forum: Majestic-12 [Bot] and 51 guests