Toyspeed.org.nz Message Board

by **KIPH8N** » Tue Aug 09, 2011 10:11 pm

I have just got my 6 speed trueno bzr but the clutch is slipping.
I have a excedy 4puk clutch off a bzg wanting to put in the bzr 6speed gearbox.

People say the 6 speed gearbox's are pretty weak. Just wanting to know if anyone has done this?

Would it be harsh on the gearbox?

Thanks.

OMG so shiny! · by **Dell'Orto** » Tue Aug 09, 2011 10:56 pm

Overkill!

no grip · by **Akane** » Wed Aug 10, 2011 12:16 am

I'd just replace it with a full face kevlar.

by **RomanV** » Wed Aug 10, 2011 12:36 am

Keep the clutch as the weakest link.

by **sergei** » Wed Aug 10, 2011 9:24 am

No! I did this and within 5000km blew the diff.

by **Jonno2002** » Wed Aug 10, 2011 9:35 am

take it to neil at autoclutch, he will rebuild it using existing parts to keep costs down, he will also advise on the best solution for your car which id say is heavy cover and standard plate.

no grip · by **Akane** » Wed Aug 10, 2011 10:45 am

sergei wrote:No! I did this and within 5000km blew the diff.

That's coz you drive your car like a Russian.

by **Stott69** » Wed Aug 10, 2011 6:59 pm

As above, overkill, leave your clutch as the weakest link. And yes the 6 speeds are overly strong

by **Mr Revhead** » Sat Aug 13, 2011 9:12 pm

Never heard of a 6spd gearbox blowing up. The different on the other hand....
Just fit a stock clutch. Unless you race it. Stock is cheap and does the job.

by **matt dunn** » Sat Aug 13, 2011 9:33 pm

Mr Revhead wrote:Never heard of a 6spd gearbox blowing up. The different on the other hand....
Just fit a stock clutch. Unless you race it. Stock is cheap and does the job.

the different? breaking a diff, yes, breaking a different, WTF? lol
Is that aussie slang?

Stock clutches on road cars = win

by **Mr Revhead** » Sat Aug 13, 2011 9:34 pm

Word prediction on my phone lol

Toyspeed.org.nz Message Board

4puk clutch in a 6 speed bzr gearbox?

4puk clutch in a 6 speed bzr gearbox?

Who is online