Anyone here take metal to scrap dealers?

Moderator: The Mod Squad

Anyone here take metal to scrap dealers?

Postby Sick Puppy » Thu Mar 29, 2012 1:43 pm

Hi guys, I've got some metal bits and bobs and some car batteries sitting around rusting, and was considering talking them to a metal dealer.

Who are the main outfits to take this stuff to, and is it worth it?

Is there anything I should do beforehand like sorting stuff between magnetic / non magnetic, removing any non-metal bits etc. Thanks for your help!
Project thread here

Discussion thread here
Sick Puppy
Toyspeed Member
 
Posts: 829
Joined: Fri Jun 17, 2005 10:29 pm
Location: Sydney

Postby Bling » Thu Mar 29, 2012 2:07 pm

What sort of stuff? Most stuff they'll take, but some they won't. By that I mean if you split out the metal from glass plastic etc they will take it. Mild steel is worth piss all, but if you have a big amount it might be worth while. Batteries are worth more than steel easily. Will depend on where you go as to how the price them. Most scrappies will probably be sweet as to use. Have used a place on Annex road a few times as that's close to work.

Separate the different metals to make life easier.

A doz beers is still a better deal than paying to get rid of it at the dump!

Idea on prices: http://metalcorp.co.nz/pricelist.php
User avatar
Bling
** Moderator **
 
Posts: 15990
Joined: Mon Dec 22, 2003 9:02 pm
Location: Quake City

Postby Sick Puppy » Thu Mar 29, 2012 10:44 pm

BZG|Bling wrote:What sort of stuff? Most stuff they'll take, but some they won't. By that I mean if you split out the metal from glass plastic etc they will take it. Mild steel is worth piss all, but if you have a big amount it might be worth while. Batteries are worth more than steel easily. Will depend on where you go as to how the price them. Most scrappies will probably be sweet as to use. Have used a place on Annex road a few times as that's close to work.

Separate the different metals to make life easier.

A doz beers is still a better deal than paying to get rid of it at the dump!

Idea on prices: http://metalcorp.co.nz/pricelist.php
Cheers for that! You work near Annex Road? Small world, I'm just of of Wigram Road - we're camped out in a factory's canteen since our office is closed indefinitely / in the red zone still... :(
Project thread here

Discussion thread here
Sick Puppy
Toyspeed Member
 
Posts: 829
Joined: Fri Jun 17, 2005 10:29 pm
Location: Sydney

Postby Bling » Thu Mar 29, 2012 11:13 pm

All good. Work is based off Wigram road actually. Must be a bit cramped in the canteen!
User avatar
Bling
** Moderator **
 
Posts: 15990
Joined: Mon Dec 22, 2003 9:02 pm
Location: Quake City

Postby Sick Puppy » Fri Mar 30, 2012 8:49 pm

BZG|Bling wrote:All good. Work is based off Wigram road actually. Must be a bit cramped in the canteen!
Until today, we were double desking - about 26 - 30 of us, so it was kinda cosy... thankfully my 'neighbours' as it were are okay, otherwise there would be blood on the floor! lol
Project thread here

Discussion thread here
Sick Puppy
Toyspeed Member
 
Posts: 829
Joined: Fri Jun 17, 2005 10:29 pm
Location: Sydney

Postby alimac » Tue Apr 03, 2012 1:03 am

I've used a place in Halswell Jcn Rd before, just by the railway line.
Altezza RS200z6MT- Yellow
alimac
Toyspeed Member
 
Posts: 134
Joined: Tue Jun 03, 2008 11:50 pm
Location: Christchurch

Postby crispy'86 » Tue Apr 03, 2012 8:20 am

I use scrap metal place on Chapmans road. RRT or resource recycling technologies. Mainly because it's relatively close, though there's a place off Maces rd in bromley which is closer i've never been there to compare prices
1983 Trueno Ae86 ( project), 92 HSV Clubbie. 2000 Fielder wagon
Many previously owned projects: 94 Hilux 4WD, 92 VP SS commodore, AE85 notchback, Ae85 rolling shell, Ke35 sr coupe, EP82 turb starlet
User avatar
crispy'86
** Moderator **
 
Posts: 3548
Joined: Thu Jul 03, 2003 11:27 pm
Location: Chch


Return to Christchurch / Upper South Island Region

Who is online

Users browsing this forum: No registered users and 0 guests