Help: Unknown random Camry hesitation - Video

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Help: Unknown random Camry hesitation - Video

Postby tiny2009 » Fri Apr 27, 2012 6:24 pm

Welcome, long story short:

- Looking after camry for family which is an Aussie built 1994 Camry Wagon 2.2 manual 5S-FE
- Fault has been with car since it was purchased 2+ years ago
- Been to toyota to check for faults, nothing found
- Checked myself by using the paper clip method, nothing found
- Service history is pretty unknown but had oil + filter regular in last few years
- Fault seems to happen when A) Has been raining or washed B) when cold, generally more reliable once its hot. Possibly gets worse with many short trips

Video below is a clip of what it does. Note this can happen while driving and seems random. It will hesitate and rev counter goes mental. Before I go trying to find the source someone may be able to point me in some sort of direction.

Possible thoughts are:

1. Earthing
2. Coils, leads, plugs?
3. ECU
4. Fuel (filter or other?)
5. Gremblins
6. Built in Aussie

Thanks in advance.

http://youtu.be/5CIVChLjTrg
tiny2009
Toyspeed Member
 
Posts: 390
Joined: Mon Feb 02, 2009 8:42 pm
Location: New Plymouth

Postby RS13 » Fri Apr 27, 2012 7:38 pm

Hmm, maybe earthing.. have you tried adding a ground to see if it helps, jumper lead etc? I've known quite a few Hondas to have a similar fault, normally caused by old loose/arcing wiring inside the distributor.
Daily driver: Toyota RunX/Toyota Caldina
Ex: 2x AE101, 5x KP60, KP61, EP71, 3x KE70, KE72, AE70, AE82, 2x TE71, AE90, AE92, ST170, plus 11 Hondas, 12 Nissans, 6 Fords, 4 Mazdas, 3 Mitsis, an Isuzu and a Lada!

Image
User avatar
RS13
Toyspeed Member
 
Posts: 3580
Joined: Tue Oct 07, 2003 9:07 pm
Location: Christchurch

Postby matt dunn » Fri Apr 27, 2012 9:44 pm

replace the dist. very common and there is not much else common that will affect the tacho.
7AGTE - DX20VT - viewtopic.php?t=59733
Discussion - viewtopic.php?t=59751
matt dunn
Toyspeed Member
 
Posts: 7109
Joined: Fri Sep 12, 2003 1:01 am
Location: Timaru

Postby Rob » Sun Apr 29, 2012 12:37 pm

Check the ecu number, there is one for oz built camry's which has a fault.
If you post the number I will recognize it.
Also the IAC plays up as well. Need to pull the the throttle body apart and clean all the carbon out
1990 ST185H - project
1996 VS Acclaim wagon
User avatar
Rob
Toyspeed Member
 
Posts: 633
Joined: Wed Sep 04, 2002 2:29 pm
Location: Gulf Harbour

Postby tiny2009 » Sun Apr 29, 2012 8:05 pm

Cheers guys, I will work my way through the list above and let you know how it goes.
tiny2009
Toyspeed Member
 
Posts: 390
Joined: Mon Feb 02, 2009 8:42 pm
Location: New Plymouth

Postby Crucible » Sun Apr 29, 2012 8:24 pm

matt dunn wrote:replace the dist. very common and there is not much else common that will affect the tacho.


+1
User avatar
Crucible
Real Life Mechanic
 
Posts: 1438
Joined: Sun Jul 17, 2005 2:46 am
Location: Wellington


Return to Tech Questions

Who is online

Users browsing this forum: Majestic-12 [Bot] and 40 guests