ST202 inner cv, where to get them???

General discussions on all non technical car related topics

Moderator: The Mod Squad

ST202 inner cv, where to get them???

Postby hsmidy » Thu May 03, 2012 5:37 pm

Hey guys

I'm in chch and am currently trying to find some inner cvs for my st202 (3sfe manual).

toyota wanted $400 each ...couldnt belive it
part master could do them for $240

does anyone know who can do a good price on them BNT only do the outter cv's and they only wanted $54 each

why are the innner cv's so expensive?

any help would be appriciated
hsmidy
Toyspeed Member
 
Posts: 351
Joined: Sun Jun 25, 2006 9:47 pm
Location: Christchurch

Postby Dell'Orto » Thu May 03, 2012 6:39 pm

Cause they rarely $&#$% out? Whole driveshaft is like $250 retail from Repco, think there is one for an ST202
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby Mr Revhead » Thu May 03, 2012 6:43 pm

Check with our forum Toyota sponsor.
It's been a while but possibly to get the inner from Toyota you need to buy the whole shaft.

As Brad said they rarely crap out, keen to know why you need inners?
Being the subject of E-whinges since 2004 8)

http://www.centralmotorsport.org.nz/home

Image
User avatar
Mr Revhead
SECURITY!
 
Posts: 24635
Joined: Tue Jan 20, 2004 4:06 pm
Location: Nelson

Postby hsmidy » Thu May 03, 2012 7:25 pm

cheers for the response guys.

I need inners because they are toast, right side you can grab and rattle around like a #ock in a bucket and the left is starting to do the same.

A whole driveshaft from repco, is that cv to cv?
hsmidy
Toyspeed Member
 
Posts: 351
Joined: Sun Jun 25, 2006 9:47 pm
Location: Christchurch

Postby holden_fan2005 » Thu May 03, 2012 7:45 pm

Should be complete with both cvs, boots etc ready greased to go. :D
holden_fan2005
Toyspeed Member
 
Posts: 560
Joined: Thu Nov 29, 2007 12:33 pm
Location: Welly

Postby bzrspeed » Thu May 03, 2012 8:04 pm

I can get you BNT cost+gst if you want me to ask.
bzrspeed
 

Postby Scottie » Thu May 03, 2012 8:56 pm

Do you have ADL nearby? They normally have not so common stuff.
User avatar
Scottie
Toyspeed Member
 
Posts: 379
Joined: Wed Nov 20, 2002 6:13 pm
Location: Auckland

Postby hsmidy » Thu May 03, 2012 9:45 pm

I'll look into that ADL -Havent heard of them
bzrspeed - I've rung BNT they dont do the inners only the outters and the outters are only $54 each which im happy to pay.

will try repco for a whole driveshaft too see if they have any...at a decent price.
hsmidy
Toyspeed Member
 
Posts: 351
Joined: Sun Jun 25, 2006 9:47 pm
Location: Christchurch

Postby Shrike » Thu May 03, 2012 11:00 pm

bzrspeed wrote:I can get you BNT cost+gst if you want me to ask.


GT4 Celica complete shaft with both inner and outer cv dont care if its st185 or st205 ill make it work just need them to be abs lol price for all 4 would be nice and a p/n :)
Why dream it when you can live it
User avatar
Shrike
Toyspeed Member
 
Posts: 731
Joined: Fri Jul 01, 2011 3:05 pm
Location: Melbourne

Postby sergei » Fri May 04, 2012 9:20 am

Shrike wrote:
bzrspeed wrote:I can get you BNT cost+gst if you want me to ask.


GT4 Celica complete shaft with both inner and outer cv dont care if its st185 or st205 ill make it work just need them to be abs lol price for all 4 would be nice and a p/n :)


ST185 Shafts are shorter with fatter axles. Inner CVs are very different between ST185 and 205, they are not swappable. In fact nothing is swappable between ST185 shaft and 205.
User avatar
sergei
Mad Russian
 
Posts: 8406
Joined: Wed May 15, 2002 12:06 pm
Location: North Shore

Postby Shrike » Fri May 04, 2012 9:26 am

sergei wrote:
Shrike wrote:
bzrspeed wrote:I can get you BNT cost+gst if you want me to ask.


GT4 Celica complete shaft with both inner and outer cv dont care if its st185 or st205 ill make it work just need them to be abs lol price for all 4 would be nice and a p/n :)


ST185 Shafts are shorter with fatter axles. Inner CVs are very different between ST185 and 205, they are not swappable. In fact nothing is swappable between ST185 shaft and 205.


you can use the st185 box in a st205 or vs versa and mine gt4 gearbox is for my levin anyway haha I can make whatever work i currently have 185 axles but I know st205 work as well
Why dream it when you can live it
User avatar
Shrike
Toyspeed Member
 
Posts: 731
Joined: Fri Jul 01, 2011 3:05 pm
Location: Melbourne

Postby rollaholic » Fri May 04, 2012 9:38 am

like brad mentioned repco do sell complete shafts for fairly reasonable prices.

i thought it was fairly handy since inner CVs can be a pain to get.
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby iOnic » Fri May 04, 2012 9:42 am

Dell'Orto wrote:Cause they rarely $&#$% out? Whole driveshaft is like $250 retail from Repco, think there is one for an ST202


Do they sell the same for late model SW20 turbo?
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby sergei » Fri May 04, 2012 10:09 am

Shrike wrote:
sergei wrote:
Shrike wrote:
bzrspeed wrote:I can get you BNT cost+gst if you want me to ask.


GT4 Celica complete shaft with both inner and outer cv dont care if its st185 or st205 ill make it work just need them to be abs lol price for all 4 would be nice and a p/n :)


ST185 Shafts are shorter with fatter axles. Inner CVs are very different between ST185 and 205, they are not swappable. In fact nothing is swappable between ST185 shaft and 205.


you can use the st185 box in a st205 or vs versa and mine gt4 gearbox is for my levin anyway haha I can make whatever work i currently have 185 axles but I know st205 work as well


Yes, I know, I am using ST205 box in ST165.
What I am saying is ST205 CVs cannot be interchanged with ST185 axles.
Eg. you cannot use ST205 inner or outer CV on ST185 axle.
Additionally the ST205 complete shafts are longer by ~20mm than ST185, and cannot be used where ST185 fits. While ST185 axle is ~ 1cm thicker than ST205.

You are after ST202 originally, which means that the ST205 will be of correct length (at least for left side).
User avatar
sergei
Mad Russian
 
Posts: 8406
Joined: Wed May 15, 2002 12:06 pm
Location: North Shore

Postby Dell'Orto » Fri May 04, 2012 6:47 pm

iOnic wrote:
Dell'Orto wrote:Cause they rarely $&#$% out? Whole driveshaft is like $250 retail from Repco, think there is one for an ST202


Do they sell the same for late model SW20 turbo?


Highly unlikely, we'd sell maybe 1 a year :lol:
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby iOnic » Fri May 04, 2012 6:49 pm

Figured as much :lol:
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby jbod » Sat May 05, 2012 9:25 pm

Get a price on the genuine st202 driveshafts, i would bet they will be alot cheaper than the actual CV price

I Paid $228 +GST each for the front complete driveshafts for my st205 gt4 from toyota. So id say the price will be around there
jbod
Toyspeed Member
 
Posts: 282
Joined: Wed Sep 01, 2010 3:33 pm
Location: New Zealand

Postby bzrspeed » Sun May 06, 2012 10:48 am

Shrike wrote:
bzrspeed wrote:I can get you BNT cost+gst if you want me to ask.


GT4 Celica complete shaft with both inner and outer cv dont care if its st185 or st205 ill make it work just need them to be abs lol price for all 4 would be nice and a p/n :)


Ok will find out for you on monday.
bzrspeed
 

Postby hsmidy » Mon May 07, 2012 7:24 pm

just an update....repco does whole driveshafts for $125 plus gst each(some discount in that price) so supper happy with that.....now i just have to hope that they can supply me with the right part
hsmidy
Toyspeed Member
 
Posts: 351
Joined: Sun Jun 25, 2006 9:47 pm
Location: Christchurch


Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 45 guests