Toyspeed.org.nz Message Board

Toyota Club of New Zealand Message Board

Skip to content

Mr2 turbo boost problem

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Post a reply

Mr2 turbo boost problem

Postby headshotnz » Sat May 26, 2012 10:57 am

Trying to figure out some problems.

Spec:

CT20b
Standered injectors
Blitz ECU
3 inch downpipe
rebuilt engine

The rest is standered.

The blitz ecu it was running 17 psi, one day i woke up and it was only running 9psi.

Spool time hasn't changed, its very consistent all the way too redline.

I cant hear any boost looks.

and vacuum is at normal 20ish at idle.

Any suggestions would be awesome.

If it means any thing there is also large amounts of blowby, (oil coming out of the intake)

Ta

James
Current: UCF20 NZ New LS400,

(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)

Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
headshotnz
Toyspeed Member
 
Posts: 699
Joined: Thu Oct 30, 2008 7:39 pm
Location: Johnsonville
Top

Postby steroidcontaskie » Sat May 26, 2012 7:49 pm

Hmmm, no responses eh.

Well, I am super noob, but I could give it a go.

have you got a boost controller? could it have failed? Doesnt the CT20B have like a 10PSI internal wastegates spring?

Just a thought.

Cheers
Edward
Science never sleeps...

Current JZZ31 soarer 2jzge-T (project), Crown Athlete 3.5 (Daily)
RVR Turbo (idle)
Carmy Wagon 2.5 (lent to mum).
Previous. A32 maxima (dead) 190e Merc (dead)
Terrano (dereg for 10 years, still being driven in west Auckland)
steroidcontaskie
Toyspeed Member
 
Posts: 349
Joined: Wed Jun 29, 2011 3:42 pm
Location: Auckland
Top

Postby Akane » Sat May 26, 2012 8:11 pm

limp mode brah.
No "stance", no "hellaflush", none of that bullshit. Nothing but no grip on full boost.
http://www.lol.co.nz/ random shit.
User avatar
Akane
Toyspeed Member
 
Posts: 4073
Joined: Tue May 14, 2002 2:08 am
Location: Auckland
Top

Postby headshotnz » Sat May 26, 2012 9:27 pm

No boost controller, its controlled by the blitz.

I assume the wastegate has a 10psi spring, but as i said it was running 17 psi comfortably.

Limp mode really??

Dont get me wrong I'm not arguing ill check the ecu for codes, but wouldn't the car be alot less drivable? Iv been driving it too work for the last 3 weeks and its been like this for 5 weeks now.
Current: UCF20 NZ New LS400,

(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)

Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
headshotnz
Toyspeed Member
 
Posts: 699
Joined: Thu Oct 30, 2008 7:39 pm
Location: Johnsonville
Top

Postby iOnic » Sat May 26, 2012 9:45 pm

Limp mode reduces boost via t-vsv. Car is still drivable, just has bugger all timing and bugger all boost
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC
Top

Postby headshotnz » Sat May 26, 2012 11:01 pm

iOnic wrote:Limp mode reduces boost via t-vsv. Car is still drivable, just has bugger all timing and bugger all boost


Rightio cheers for that.

So best idea would be too put it in diag mode and see what codes it pulls?

Its probably the AFM lol.. lucky I have a spare.
Current: UCF20 NZ New LS400,

(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)

Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
headshotnz
Toyspeed Member
 
Posts: 699
Joined: Thu Oct 30, 2008 7:39 pm
Location: Johnsonville
Top

Postby headshotnz » Sat May 26, 2012 11:33 pm

ill be checking the limp mode.

Does any one know how to tell if the wastegate is stuck open, or what the symtoms would be.

How the hell am i going to be able too find a wastegate for a ct20b. omg.
Current: UCF20 NZ New LS400,

(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)

Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
headshotnz
Toyspeed Member
 
Posts: 699
Joined: Thu Oct 30, 2008 7:39 pm
Location: Johnsonville
Top

Postby iOnic » Sun May 27, 2012 10:39 am

It's probably knock. Those Blitz access ECU's aren't tuned for NZ fuel. Symptom of waste gate stuck completely open is no boost. Partially open is very little boost and massive lag.
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC
Top

Postby headshotnz » Sun May 27, 2012 11:46 am

Thanks for that, pulled codes
4-3
3-1
2-1
2-4

Ill be looking those up now
Current: UCF20 NZ New LS400,

(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)

Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
headshotnz
Toyspeed Member
 
Posts: 699
Joined: Thu Oct 30, 2008 7:39 pm
Location: Johnsonville
Top

Postby Grrrrrrr! » Sun May 27, 2012 11:57 am

43 starter motor signal
31 AFM signal
21 O2 sensor
24 Intake air temp


Sounds like your AFM is bung or not plugged in.
Reality: A nasty hallucination that is caused by excess blood in the alcohol stream.
Grrrrrrr!
Toyspeed Member
 
Posts: 2566
Joined: Tue Jun 17, 2003 7:21 pm
Location: Souf Orkland
Top

Postby headshotnz » Sun May 27, 2012 12:17 pm

Grrrrrrr! wrote:43 starter motor signal
31 AFM signal
21 O2 sensor
24 Intake air temp


Sounds like your AFM is bung or not plugged in.


Thanks for that.

Ill swap over the AFM now and see what happens. Its good having my project 2 sitting there in bits that i can steal parts from.. untill the day I wabt too get it working haha
Current: UCF20 NZ New LS400,

(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)

Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
headshotnz
Toyspeed Member
 
Posts: 699
Joined: Thu Oct 30, 2008 7:39 pm
Location: Johnsonville
Top

Postby headshotnz » Sun May 27, 2012 12:40 pm

No change. Hmm. 02 sensor?
Current: UCF20 NZ New LS400,

(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)

Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
headshotnz
Toyspeed Member
 
Posts: 699
Joined: Thu Oct 30, 2008 7:39 pm
Location: Johnsonville
Top

Postby Mr Ree » Sun May 27, 2012 1:00 pm

Is the vacuum line that goes to the WG actuator still intact?
wak thud gush!
User avatar
Mr Ree
Toyspeed Member
 
Posts: 2758
Joined: Wed Nov 17, 2010 6:51 pm
Location: On the South coast where the tui's sing tututu.
Top

Postby headshotnz » Sun May 27, 2012 1:11 pm

I assume your talking about one of two thats at the top of the WG one pipe goes back too the turbo the other goes under the water neck.

But yeah mate they look in good condition.
Current: UCF20 NZ New LS400,

(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)

Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
headshotnz
Toyspeed Member
 
Posts: 699
Joined: Thu Oct 30, 2008 7:39 pm
Location: Johnsonville
Top

Postby Dell'Orto » Sun May 27, 2012 1:13 pm

Its probably been knocking and pulling timing, Maybe reset the ECU and see how it goes.
Really, you need to get that boost under control, it wont last on 17psi
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt
Top

Postby Akane » Sun May 27, 2012 6:48 pm

Dell'Orto wrote:Really, you need to get that boost under control, it wont last on 17psi


but it pulls the mean as skidz :(
No "stance", no "hellaflush", none of that bullshit. Nothing but no grip on full boost.
http://www.lol.co.nz/ random shit.
User avatar
Akane
Toyspeed Member
 
Posts: 4073
Joined: Tue May 14, 2002 2:08 am
Location: Auckland
Top

Postby headshotnz » Sun May 27, 2012 10:09 pm

Akane wrote:
Dell'Orto wrote:Really, you need to get that boost under control, it wont last on 17psi


but it pulls the mean as skidz :(


Not with an open diff.
Current: UCF20 NZ New LS400,

(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)

Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
headshotnz
Toyspeed Member
 
Posts: 699
Joined: Thu Oct 30, 2008 7:39 pm
Location: Johnsonville
Top

Postby Al » Mon May 28, 2012 11:49 am

<3 haters
85 Corolla GT - 08 Blade Master G
Image
User avatar
Al
Toyspeed Member
 
Posts: 6146
Joined: Mon Jan 20, 2003 11:52 pm
Location: Christchurch
Top

Postby headshotnz » Mon May 28, 2012 9:36 pm

I feel silly, the bolt at the top of the bov had fallen out. all is back too normal now :)
Current: UCF20 NZ New LS400,

(Current project) Gen II SW20 Turbo (MR2 v0.5Beta currently in the works)

Previous: Ae101 trueno (S/S), ST185 Group A, Accord with adjustables and H22a certed. SW20 (ct20b, blitz ecu) Uzz30, ae101 s/s 20v c56(-04c;) ) lsd, ae100 beast 5afe(for maximum horsepowers)
headshotnz
Toyspeed Member
 
Posts: 699
Joined: Thu Oct 30, 2008 7:39 pm
Location: Johnsonville
Top
Post a reply

Return to Tech Questions

Who is online

Users browsing this forum: Google [Bot] and 35 guests

Powered by phpBB® Forum Software © phpBB Group
Time : 0.038s | 13 Queries | GZIP : On