Lvv cert query

General discussions on all non technical car related topics

Moderator: The Mod Squad

Postby tsoob » Wed Jul 17, 2013 1:17 pm

yup been saying this for ages... LVV have gone too far and it needs to be abolished.

A simple log book type of thing that has an engineer stamp it, then enter it onto an online system similar to the wof system would be suffice, you could then have an 'update' charge which is negligible for any small changes and still have an inital cert which checks everything.
My 2C
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
User avatar
tsoob
Toyspeed Member
 
Posts: 3253
Joined: Tue Dec 05, 2006 7:37 pm
Location: 201.1kw on 19psi

Postby siren676 » Wed Jul 17, 2013 1:30 pm

I'm with tsoob on this one, I get the initial inspection cost to get the car certed for the first time but paying $500 again even for a small change(e.g $50 spacers) is insane.
Also the hassle of waiting for the cert plate to be made and a time organised for it to be fitted will mean the car is off the road for even longer.
I'd much prefer a logbook style system or even a card type system which stores all mods online.
1998 5dr Glanza V Replica - 5E-FHE powered

1990 Mazda MX5 NA6C drift build - Met a wall 2/5/15
User avatar
siren676
Toyspeed Member
 
Posts: 1015
Joined: Sun Jun 13, 2010 1:47 pm
Location: South Auckland

Postby MR2SIK » Wed Jul 17, 2013 1:42 pm

Looks like its going to be more hassle than its worth :(

Car is currently sitting on R32 gts-t rims 16x6.5
I quite like the style, but am unsure whether to find a pair of matching 8" GTR rims for the rear, put on the 17x8's I have in the garage, or go for a staggered 17" set up in the future.

Reeeally don't want to have to be stuck with just the one choice.
$500 is a bit excessive to look at something that wouldnt even get a 2nd look normally in a $40 WOF check.
Didn't realise it had gotten so pedantic over the years :?
2011 Ford Mondeo tdci.

Hey, at least it sounds like a 3s.

1990 MR2 GT garage queen
User avatar
MR2SIK
Toyspeed Member
 
Posts: 2016
Joined: Tue Nov 25, 2003 9:30 pm
Location: Christchurch

Postby Al » Wed Jul 17, 2013 6:49 pm

Just don't fit the coil overs
Fit whatever wheels you like
???????
Profit
85 Corolla GT - 08 Blade Master G
Image
User avatar
Al
Toyspeed Member
 
Posts: 6146
Joined: Mon Jan 20, 2003 11:52 pm
Location: Christchurch

Postby Akane » Wed Jul 17, 2013 7:06 pm

wde_bdy wrote:
Akane wrote:If you're going for another cert, do not cert with big rims.

I've made the mistake of certifying with aftermarket rims, now I'm stuck to that 1 size forever, until I do another cert.


Doesn't matter what size you cert on, you are still stuck with them until a new cert. Can cert for two wheel sizes though, may cost a bit more as they have to perform all their tests and measurements on both wheel sizes.

Callum


If you cert with aftermarket rims: IE: 18x8, 18x9 on your car, then you're stuck with that forever.

If you cert with stock rims, you can go +5% as set on the legal guide lines as if your car is uncerted.

A point that was pointed out to me by Fraser Cars when I was doing my cert, I asked him "that means I should've certed it with factory rims?"

and he said "yeap"
No "stance", no "hellaflush", none of that bullshit. Nothing but no grip on full boost.
http://www.lol.co.nz/ random shit.
User avatar
Akane
Toyspeed Member
 
Posts: 4073
Joined: Tue May 14, 2002 2:08 am
Location: Auckland

Postby MR2SIK » Wed Jul 17, 2013 7:23 pm

How pedantic would they be over stock 14s vs stock 15s?

Also is that 5% the total rolling diameter inclusive of tyres or just the rim?
2011 Ford Mondeo tdci.

Hey, at least it sounds like a 3s.

1990 MR2 GT garage queen
User avatar
MR2SIK
Toyspeed Member
 
Posts: 2016
Joined: Tue Nov 25, 2003 9:30 pm
Location: Christchurch

Postby STR » Wed Jul 17, 2013 7:54 pm

MR2SIK wrote:
Also is that 5% the total rolling diameter inclusive of tyres or just the rim?


Unless you're rolling around on your bare rims, it includes tyre too.
82 KP60 4AGTE race car
S.T.R - Shopping Trolley Racing!!!
User avatar
STR
Toyspeed Member
 
Posts: 331
Joined: Mon Feb 28, 2011 8:13 pm
Location: West Auckland

Postby Bling » Wed Jul 17, 2013 8:19 pm

It could be worse, they could ban some / all modifications like some places in Australia.

Least hassle is running car without items that require cert. If you need to be running adjustable suspension (which you can't adjust the height piss all anyway), then perhaps the car isn't built for the street anyway. If I wanted a car to handle well and it was a road car i'd just pick and choose an appropriate spring / shock setup.
User avatar
Bling
** Moderator **
 
Posts: 15990
Joined: Mon Dec 22, 2003 9:02 pm
Location: Quake City

Postby Al » Wed Jul 17, 2013 8:55 pm

MR2SIK wrote:How pedantic would they be over stock 14s vs stock 15s?

Also is that 5% the total rolling diameter inclusive of tyres or just the rim?


Means you could go from the stock 15x7 with 225/50R15s to 255/35R18s and still be within 5%.
85 Corolla GT - 08 Blade Master G
Image
User avatar
Al
Toyspeed Member
 
Posts: 6146
Joined: Mon Jan 20, 2003 11:52 pm
Location: Christchurch

Postby wde_bdy » Wed Jul 17, 2013 9:20 pm

Akane wrote:If you cert with stock rims, you can go +5% as set on the legal guide lines as if your car is uncerted.


Got anything in writing to support that? Because I've heard that myth before. Once certed your car MUST match what it was certed for.
Some of the people whinging about the cert rules might want to compare them to other countries and also do a bit of research on what actually went on in the 90's and where we could have ended up instead.

Callum
Image
User avatar
wde_bdy
Toyspeed Member
 
Posts: 2704
Joined: Wed Oct 23, 2002 11:43 pm
Location: Gisborne

Postby Akane » Thu Jul 18, 2013 12:05 am

Sorry, nothing to fully back it up except word of mouth from the certifier.

If you do find something that disproves that claim, please do let me know, I don't want to be stuck with that size until I do yet another size.
No "stance", no "hellaflush", none of that bullshit. Nothing but no grip on full boost.
http://www.lol.co.nz/ random shit.
User avatar
Akane
Toyspeed Member
 
Posts: 4073
Joined: Tue May 14, 2002 2:08 am
Location: Auckland

Postby tsoob » Thu Jul 18, 2013 11:58 am

Al wrote:Just don't fit the coil overs
Fit whatever wheels you like
???????
Profit


Id like to see you get 9.5s on a silvia without coilovers (all around with low offset)
Platinum Wheels
15 Parkway Drive
Mairangi Bay
09 486 5317
WHEELS, TYRES & SUSPENSION!
www.platinumwheels.co.nz
User avatar
tsoob
Toyspeed Member
 
Posts: 3253
Joined: Tue Dec 05, 2006 7:37 pm
Location: 201.1kw on 19psi

Postby iOnic » Thu Jul 18, 2013 8:35 pm

Does anyone else remember when people fitted adjustable suspension to get better suspension performance rather than to make room for wheels that technically don't fit their cars.
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby wde_bdy » Thu Jul 18, 2013 8:41 pm

Akane wrote:If you do find something that disproves that claim, please do let me know, I don't want to be stuck with that size until I do yet another size.


A cert is a cert, ask on the LVVTA forum if you want but car must always match the cert plate factory wheels or not.

Callum
Image
User avatar
wde_bdy
Toyspeed Member
 
Posts: 2704
Joined: Wed Oct 23, 2002 11:43 pm
Location: Gisborne

Postby rollaholic » Thu Jul 18, 2013 9:17 pm

iOnic wrote:Does anyone else remember when people fitted adjustable suspension to get better suspension performance rather than to make room for wheels that technically don't fit their cars.


yeah, was back in the days when cars looked like this :P

http://www.trademe.co.nz/motors/used-ca ... 286556.htm
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby iOnic » Thu Jul 18, 2013 9:57 pm

My eyes!
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby captain crescent » Thu Jul 18, 2013 10:08 pm

iOnic wrote:My eyes!

They burn so so so bad!
Budweiser is a gay beer. if it isn't a gay beer Sam why are you trying to put it up my arse.
User avatar
captain crescent
Toyspeed Member
 
Posts: 269
Joined: Fri Jan 01, 2010 10:35 am
Location: Palmerston North

Postby jacobrjett » Thu Jul 18, 2013 11:24 pm

surely everyone has seen that by now?
User avatar
jacobrjett
Toyspeed Member
 
Posts: 1212
Joined: Sun Mar 25, 2012 12:03 am
Location: Wellington

Postby Al » Thu Jul 18, 2013 11:35 pm

tsoob wrote:
Al wrote:Just don't fit the coil overs
Fit whatever wheels you like
???????
Profit


Id like to see you get 9.5s on a silvia without coilovers (all around with low offset)


Its an MR2. 9.5s will piss in on the back.
85 Corolla GT - 08 Blade Master G
Image
User avatar
Al
Toyspeed Member
 
Posts: 6146
Joined: Mon Jan 20, 2003 11:52 pm
Location: Christchurch

Postby wde_bdy » Fri Jul 19, 2013 8:37 am

tsoob wrote:Id like to see you get 9.5s on a silvia without coilovers (all around with low offset)


That size wheel on a Silvia is likely to breach other cert thresholds anyway.

Callum
Image
User avatar
wde_bdy
Toyspeed Member
 
Posts: 2704
Joined: Wed Oct 23, 2002 11:43 pm
Location: Gisborne

PreviousNext

Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 28 guests