What did you do to your car today?

General discussions on all non technical car related topics

Moderator: The Mod Squad

Postby Soiled » Thu Jul 25, 2013 12:22 pm

Picked it up from Sinco yesterday

Image
Soiled
Toyspeed Member
 
Posts: 93
Joined: Sat Sep 04, 2010 4:05 pm

Postby crispy'86 » Thu Jul 25, 2013 9:02 pm

Actually picked up an ae82 fxgt for a new daily driver, needs a few parts fitted to it, Got an engine bay loom from another ae82 (4ae 8v sohc injected 8O ), started to configure wiring to work in the fxgt dash, interior etc.
1983 Trueno Ae86 ( project), 92 HSV Clubbie. 2000 Fielder wagon
Many previously owned projects: 94 Hilux 4WD, 92 VP SS commodore, AE85 notchback, Ae85 rolling shell, Ke35 sr coupe, EP82 turb starlet
User avatar
crispy'86
** Moderator **
 
Posts: 3548
Joined: Thu Jul 03, 2003 11:27 pm
Location: Chch

Postby duddley » Sat Jul 27, 2013 7:11 pm

Paid an auto sparky to find out why my brakelights fuse keept blowing as brake lights are handy in Auckland traffic.
i don't club seals..... only sandwiches
duddley
Toyspeed Member
 
Posts: 1082
Joined: Fri Feb 06, 2009 10:32 am
Location: auckland

Postby rollaholic » Sat Jul 27, 2013 7:26 pm

duddley wrote:Paid an auto sparky to find out why my brakelights fuse keept blowing as brake lights are handy in Auckland traffic.


thats true, indicators only have to work once every 6 months though :P
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby duddley » Sat Jul 27, 2013 8:34 pm

rollaholic wrote:
duddley wrote:Paid an auto sparky to find out why my brakelights fuse keept blowing as brake lights are handy in Auckland traffic.


thats true, indicators only have to work once every 6 months though :P


I'm pretty sure indicators are an optional extra out west.
i don't club seals..... only sandwiches
duddley
Toyspeed Member
 
Posts: 1082
Joined: Fri Feb 06, 2009 10:32 am
Location: auckland

Postby Stott69 » Tue Jul 30, 2013 7:11 pm

Found out the bubbles above the windscreen arnt as bad as everyone was thinking. Will only need one small patch and some TLC to the rest
User avatar
Stott69
Toyspeed Member
 
Posts: 2605
Joined: Thu Oct 04, 2007 11:51 am
Location: Wainui Central!

Postby iOnic » Tue Jul 30, 2013 7:29 pm

Sounds like I'll find out tomorrow if my RX8 is dead or whether I got lucky. Been painful not having it going :(
Oh and my RB30 crank is bent. Yay.
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby AE82 FXGT » Tue Jul 30, 2013 7:49 pm

iOnic wrote:Sounds like I'll find out tomorrow if my RX8 is dead or whether I got lucky. Been painful not having it going :(
Oh and my RB30 crank is bent. Yay.


What happened to your RX8?
Previous: '85 AE82 FXGT, '92 AE101 GTZ, '92 AE101 GT-APEX, '04 SE3P RX8, '05 Mazda 6 MPS, '97 NA8C MX5, '03 GSX250, '08 ZX6R, '13 GROM
Current: '07 GRE156 BLADE MASTER G
User avatar
AE82 FXGT
Toyspeed Member
 
Posts: 1594
Joined: Thu Nov 04, 2004 1:51 pm
Location: Lower hutt

Postby Bling » Tue Jul 30, 2013 7:52 pm

Going by the posts above, he tried to put the RB30 crank in it?
User avatar
Bling
** Moderator **
 
Posts: 15990
Joined: Mon Dec 22, 2003 9:02 pm
Location: Quake City

Postby jacobrjett » Tue Jul 30, 2013 7:56 pm

that even happens? (re: bent crank)

adjusted carby a bit. i dont know my way around a carby yet but it seems to idle a bit better.
User avatar
jacobrjett
Toyspeed Member
 
Posts: 1212
Joined: Sun Mar 25, 2012 12:03 am
Location: Wellington

Postby Dell'Orto » Tue Jul 30, 2013 8:09 pm

Yup, pretty common
1988 KE70 Wagon - Slowly rusting
1990 NA6 MX-5 - because reasons
2018 Ranger - Because workcar
1997 FD3S RX-7 Type R - all brap, all the time
OMG so shiny!

Quint wrote:Not just cock, large cock.
User avatar
Dell'Orto
** Moderator **
 
Posts: 17494
Joined: Tue Jul 08, 2003 5:07 am
Location: Straight out the ghetto, Lower Hutt

Postby Lloyd » Tue Jul 30, 2013 8:10 pm

Cranks tend to bend when bearings get quite worn. Silvertops are good for it.
User avatar
Lloyd
** Moderator **
 
Posts: 6195
Joined: Tue Oct 15, 2002 1:50 pm
Location: Dunedin

Postby iOnic » Tue Jul 30, 2013 8:10 pm

Long story: when I bought the RX8 I had a list of jobs that I wanted done before I took delivery of the car. One of them was replacing all the coilpacks since they commonly go and can take the engine with them. Mazda has released updated coilpacks to try and get around this issue. It was at the Mazda dealership for a week/$2k bill before I had even driven it for longer than a test drive :lol:

Fast forward 6 months/2000kms and I was in town last week. Pulled over, ran across the road for 30 secs, came back and it wouldn't start. Had very weak spark. Got it started 2hours later and drove it to the gas station to grab some fuel and head home - repeat of prior experience.

Eventually got it home and checked it over, coilpacks are the "old" part number (turns out they weren't replaced at all - still have the date/mileage of last replacement on them). Rang Mazda and asked why the coilpacks I got charged for didn't make their way into my car - got the run around until eventually lots of abuse in their direction resulted in an admission of fault and a refund.

So I've bought brand new coilpacks which should be here tomorrow so I'll throw them in and see if it works again. Towards the end it wouldn't start/run at all and sounded horrible.

Because petrol and lubricating oil go into the same place it's important to have good spark. Bad coils = weak spark = unburned fuel diluting the lubricating oil = no/less lubrication. This has been going on for 6 months so I'm not holding out much hope tbh. Best case it needs a rebuild sooner than it did before.
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby rollaholic » Wed Jul 31, 2013 7:18 am

iOnic wrote:because 20B
BASU!
User avatar
rollaholic
Toyspeed Member
 
Posts: 5383
Joined: Fri May 28, 2004 2:19 am
Location: West is Best

Postby iOnic » Wed Jul 31, 2013 7:21 am

If 20B isn't the answer, you're asking the wrong question.
Faber est suae quisque fortunae
2009 Mazda3 MPS
2016 CFMoto 650NKs
2013 Hyundai IX35 Highlander
User avatar
iOnic
Toyspeed Member
 
Posts: 3736
Joined: Fri Jun 25, 2004 6:31 pm
Location: Melbourne VIC

Postby steroidcontaskie » Wed Jul 31, 2013 11:14 am

Pulled over, ran across the road for 30 secs, came back and it wouldn't start. Had very weak spark. Got it started 2hours later and drove it to the gas station to grab some fuel and head home - repeat of prior experience


I had a friend that had the same problem with his RX8, wouldnt restart if still hot after a run. Eventually after a long fight he got a complete engine rebuild under warranty. Hopefully your car isnt that bad.

Cheers
Ed
Science never sleeps...

Current JZZ31 soarer 2jzge-T (project), Crown Athlete 3.5 (Daily)
RVR Turbo (idle)
Carmy Wagon 2.5 (lent to mum).
Previous. A32 maxima (dead) 190e Merc (dead)
Terrano (dereg for 10 years, still being driven in west Auckland)
steroidcontaskie
Toyspeed Member
 
Posts: 349
Joined: Wed Jun 29, 2011 3:42 pm
Location: Auckland

Postby Timmo » Wed Jul 31, 2013 12:21 pm

steroidcontaskie wrote:I had a friend that had the same problem with his RX8, wouldnt restart if still hot after a run. Eventually after a long fight he got a complete engine rebuild under warranty. Hopefully you car isnt that bad.

Cheers
Ed


Isn't that just a 'feature' of Rotaries? I.e. you are supposed to give a good rev and shut down otherwise they are hard to hot-start?

Also, track day in the '5

http://www.youtube.com/watch?v=cmtG7O5uSCE
Lightweight baby
1991 MX5 Supercharged
Timmo
Toyspeed Member
 
Posts: 707
Joined: Thu Jan 26, 2006 10:44 am
Location: Tauranga/Mount

Postby sergei » Wed Jul 31, 2013 3:13 pm

steroidcontaskie wrote:
Pulled over, ran across the road for 30 secs, came back and it wouldn't start. Had very weak spark. Got it started 2hours later and drove it to the gas station to grab some fuel and head home - repeat of prior experience


I had a friend that had the same problem with his RX8, wouldnt restart if still hot after a run. Eventually after a long fight he got a complete engine rebuild under warranty. Hopefully your car isnt that bad.

Cheers
Ed


Interesting I have a friend who had exactly same problem and solution...
Is your friend's name Chris by any chance?
User avatar
sergei
Mad Russian
 
Posts: 8406
Joined: Wed May 15, 2002 12:06 pm
Location: North Shore

Postby Shrike » Wed Jul 31, 2013 3:36 pm

iOnic wrote:Long story: when I bought the RX8 I had a list of jobs that I wanted done before I took delivery of the car. One of them was replacing all the coilpacks since they commonly go and can take the engine with them. Mazda has released updated coilpacks to try and get around this issue. It was at the Mazda dealership for a week/$2k bill before I had even driven it for longer than a test drive :lol:

Fast forward 6 months/2000kms and I was in town last week. Pulled over, ran across the road for 30 secs, came back and it wouldn't start. Had very weak spark. Got it started 2hours later and drove it to the gas station to grab some fuel and head home - repeat of prior experience.

Eventually got it home and checked it over, coilpacks are the "old" part number (turns out they weren't replaced at all - still have the date/mileage of last replacement on them). Rang Mazda and asked why the coilpacks I got charged for didn't make their way into my car - got the run around until eventually lots of abuse in their direction resulted in an admission of fault and a refund.

So I've bought brand new coilpacks which should be here tomorrow so I'll throw them in and see if it works again. Towards the end it wouldn't start/run at all and sounded horrible.

Because petrol and lubricating oil go into the same place it's important to have good spark. Bad coils = weak spark = unburned fuel diluting the lubricating oil = no/less lubrication. This has been going on for 6 months so I'm not holding out much hope tbh. Best case it needs a rebuild sooner than it did before.


If engine is dead I say mazda would be up for it due to them not installing the new coils because lack of preventive maintenance caused it

But depends how much you cbf to fight them over it
Why dream it when you can live it
User avatar
Shrike
Toyspeed Member
 
Posts: 731
Joined: Fri Jul 01, 2011 3:05 pm
Location: Melbourne

Postby JZCrazy » Wed Jul 31, 2013 8:08 pm

Disconnected the wide band O2 sensor and took it out.

How or what do you clean these things with?

Will re calibrate it first and check for error codes.
JZCrazy
Toyspeed Member
 
Posts: 119
Joined: Sat Apr 06, 2013 5:15 pm
Location: The Hutt 04 Country

PreviousNext

Return to General Car Discussion

Who is online

Users browsing this forum: No registered users and 27 guests

cron