1N gearbox

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

1N gearbox

Postby fangsport » Thu Jan 15, 2015 1:17 pm

is the gearbag for the 1N (1.5l diesil) motor specific, or is there another unit ( E/A etc) that will bolt up ?
having trouble tracking a gearbox down to replace one with a suspected broken diff
I've been a bad bad boy. I should read the rules and behave before I get spanked by an admin

f#@k you i won't do what ya tell me

http://www.facebook.com/pages/Fangwood/225658970893404
fangsport
Toyspeed Member
 
Posts: 4169
Joined: Sun Nov 30, 2003 10:52 am
Location: Timaru

Re: 1N gearbox

Postby Grrrrrrr! » Thu Jan 15, 2015 1:44 pm

What is it in? What is the gearbox code on the build plate?
Reality: A nasty hallucination that is caused by excess blood in the alcohol stream.
Grrrrrrr!
Toyspeed Member
 
Posts: 2566
Joined: Tue Jun 17, 2003 7:21 pm
Location: Souf Orkland

Re: 1N gearbox

Postby Stu- » Thu Jan 15, 2015 5:41 pm

Pretty sure they come with a C150 - could just take the bellhousing off (if bolt pattern differs to e series) and slam it onto any C150 starlet box?
1985 Toyota Starlet EP71 (4agte)
Project Thread
http://garage4ag.wordpress.com
Auto electrical and ecu installation
User avatar
Stu-
Toyspeed Member
 
Posts: 1767
Joined: Wed May 15, 2002 4:17 pm
Location: Hiding from you...

Re: 1N gearbox

Postby fangsport » Sun Jan 25, 2015 11:06 pm

ok, so completely random.
lifted front wheels off ground, foot on brakes , into gear has drive. back onto ground for some full lock action still has drive. but yet it wouldn't transmit any prior, and has done this trick once or twice before. very quiet in it operation and easy enough to get into gear. confused, suspecting something randomly falling out of mesh ??

box is a C153, do they share final drive with anything else ?
I've been a bad bad boy. I should read the rules and behave before I get spanked by an admin

f#@k you i won't do what ya tell me

http://www.facebook.com/pages/Fangwood/225658970893404
fangsport
Toyspeed Member
 
Posts: 4169
Joined: Sun Nov 30, 2003 10:52 am
Location: Timaru

Re: 1N gearbox

Postby Stu- » Mon Jan 26, 2015 11:44 am

Ah so in that case any c150 should be fine - at worst you'll need to swap over the bellhousing section of the casings. The ratios will be different but I don't think its something you'd cry about too much.
1985 Toyota Starlet EP71 (4agte)
Project Thread
http://garage4ag.wordpress.com
Auto electrical and ecu installation
User avatar
Stu-
Toyspeed Member
 
Posts: 1767
Joined: Wed May 15, 2002 4:17 pm
Location: Hiding from you...

Re: 1N gearbox

Postby 85AW20v » Tue Jan 27, 2015 9:42 pm

Clutch playing up? Or is it auto?
See ya

Simon
85 MR2 20v
User avatar
85AW20v
Toyspeed Member
 
Posts: 1059
Joined: Fri May 24, 2002 6:18 pm
Location: Taupo, NZ

Re: 1N gearbox

Postby fangsport » Tue Jan 27, 2015 9:58 pm

85AW20v wrote:Clutch playing up? Or is it auto?

clutch feel pretty solid, it would rather stall the engine than slip when the brakes are applied.
I've been a bad bad boy. I should read the rules and behave before I get spanked by an admin

f#@k you i won't do what ya tell me

http://www.facebook.com/pages/Fangwood/225658970893404
fangsport
Toyspeed Member
 
Posts: 4169
Joined: Sun Nov 30, 2003 10:52 am
Location: Timaru

Re: 1N gearbox

Postby RS13 » Wed Jan 28, 2015 6:03 pm

CVs are alright? You lose drive if you lose an outer, done it a couple of times.
Daily driver: Toyota RunX/Toyota Caldina
Ex: 2x AE101, 5x KP60, KP61, EP71, 3x KE70, KE72, AE70, AE82, 2x TE71, AE90, AE92, ST170, plus 11 Hondas, 12 Nissans, 6 Fords, 4 Mazdas, 3 Mitsis, an Isuzu and a Lada!

Image
User avatar
RS13
Toyspeed Member
 
Posts: 3580
Joined: Tue Oct 07, 2003 9:07 pm
Location: Christchurch


Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 8 guests