Digressive vs linear shocks

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

Digressive vs linear shocks

Postby steroidcontaskie » Mon Apr 20, 2015 7:39 pm

Hi all

Going to get a new suspension set up for my soarer and am somewhat lost when it comes to shock technology.

I was looking at some tien flex street, but I got reading that digressive shocks (like the fortune autos ones) might be better .

Car is street driven, with just maybe the odd track day.

Does anyone have actual experience with the difference between the two and which would be more suitable for a daily driver?

Cheers
Edward
Science never sleeps...

Current JZZ31 soarer 2jzge-T (project), Crown Athlete 3.5 (Daily)
RVR Turbo (idle)
Carmy Wagon 2.5 (lent to mum).
Previous. A32 maxima (dead) 190e Merc (dead)
Terrano (dereg for 10 years, still being driven in west Auckland)
steroidcontaskie
Toyspeed Member
 
Posts: 349
Joined: Wed Jun 29, 2011 3:42 pm
Location: Auckland

Re: Digressive vs linear shocks

Postby Bazda » Wed Apr 29, 2015 11:48 am

Digressive is far better for daily driving. We have our MRP coilovers which are semi digressive but no where near as much as Fortune Autos.
Street driving ride quality is very different.
You can look up their explanations on their shock tech section from the web page.

I've supplied guys the FA in place of coilovers such as BC etc and they were quite amazed on the ride quality difference plus better handling as well.
Basically you get what you pay for :)
1988 Toyota Levin GTZ 410kw atw @26psi
Join us on facebook - MRP - Manon Racing Products
http://www.mrpltd.co.nz
Turbonetics|Fortune Auto Coilovers|Wilwood brakes|Tilton clutches|
User avatar
Bazda
Toyspeed Sponsor
 
Posts: 5713
Joined: Sat Jun 01, 2002 10:32 pm
Location: Auckland

Re: Digressive vs linear shocks

Postby Stu- » Wed Apr 29, 2015 6:37 pm

Second the FA stuff - even running heavier spring rates in my car the FA ride quality is great! I work on and drive alot of cars with Tein / BC / D2 / Yellowspeed / HKS etc etc coil overs and they are all good to a point but often at the sacrifice of either ride quality or handing where as the FA stuff seems to be great at both. Bilsteins would be my other recommendation but they come at a price. The original Billys for my car were over $650 a corner but they were full custom builds.
1985 Toyota Starlet EP71 (4agte)
Project Thread
http://garage4ag.wordpress.com
Auto electrical and ecu installation
User avatar
Stu-
Toyspeed Member
 
Posts: 1767
Joined: Wed May 15, 2002 4:17 pm
Location: Hiding from you...


Return to Tech Questions

Who is online

Users browsing this forum: No registered users and 9 guests