KZN185 Anchor Bolts

The place for all technical car discussions. If you haven't already, read our Disclaimer first!

Moderator: The Mod Squad

KZN185 Anchor Bolts

Postby Boosted_162 » Sat Dec 14, 2019 9:24 pm

Hey guys.

So i'm finally back (kinda) in camp Toyota! :lol:

Sold my Subaru last week and picked up a KZN185 Hilux Surf today. Using it as a weekend toy and to tow my Jetski.

Anywho, I need to put an anchor bolt/tether in the back for my sons car seat. Can't see anywhere obvious in there, anyone done it before/seen one done before and got any hints or tips before I go pay someone?

Cheers!
Current:
1996 KZN185 Hilux Surf
2008 Mazda2
Boosted_162
Toyspeed Member
 
Posts: 3624
Joined: Sun Sep 04, 2005 1:02 am
Location: Kaukapakapa

Re: KZN185 Anchor Bolts

Postby BlakeNZ » Sat Dec 14, 2019 9:32 pm

havent they got two loops set in the floor near the rear of the cargo area?
they are a great wagon, did you get intercooled? They are still pretty expensive, haven't come down in price at all in the last six years, despite racking up the mileage.
contact me if you need a 3 inch down pipe to get that heat out of the head to reduce the chances of it cracking. There are power and fuel economy gains to be had too.
former car 1991 JZZ30 soarer 1JZGTE 11.5sec@122mph(stock turbos,E85)
current car 1993 JZZ30 soarer (Golden Boy)
BlakeNZ
Toyspeed Member
 
Posts: 625
Joined: Thu Oct 03, 2002 1:53 pm
Location: Palmerston Nth

Re: KZN185 Anchor Bolts

Postby Boosted_162 » Sat Dec 14, 2019 9:47 pm

BlakeNZ wrote:havent they got two loops set in the floor near the rear of the cargo area?
they are a great wagon, did you get intercooled? They are still pretty expensive, haven't come down in price at all in the last six years, despite racking up the mileage.
contact me if you need a 3 inch down pipe to get that heat out of the head to reduce the chances of it cracking. There are power and fuel economy gains to be had too.


There is but they aren't rated for car seats, they are more luggage tie downs. I thought about removing one and replacing with a proper anchor but seems like it may be too far in the corner? Will need to investigate.

Nah it isn't intercooled. Mines done 367k and I paid $6500 for it, but it had a brand new head 3 months ago at $2500 and a rebuilt trans 3 years ago at $2600!

Exhaust is definitely on the cards, probably tyres and suspension first up.
Current:
1996 KZN185 Hilux Surf
2008 Mazda2
Boosted_162
Toyspeed Member
 
Posts: 3624
Joined: Sun Sep 04, 2005 1:02 am
Location: Kaukapakapa

Re: KZN185 Anchor Bolts

Postby BlakeNZ » Sun Dec 15, 2019 10:17 pm

sounds like you got some decent value there. well done. My mate has one (non intercooled) with similar km to yours, and with a 3" down pipe and exhaust, at 10psi boost it is faster than my 2.7 ETI intercooled Mistral at 14-15psi (but with stock exhaust system).
Go for a external trans cooler if you intend any beach work or towing.
former car 1991 JZZ30 soarer 1JZGTE 11.5sec@122mph(stock turbos,E85)
current car 1993 JZZ30 soarer (Golden Boy)
BlakeNZ
Toyspeed Member
 
Posts: 625
Joined: Thu Oct 03, 2002 1:53 pm
Location: Palmerston Nth

Re: KZN185 Anchor Bolts

Postby Boosted_162 » Mon Dec 16, 2019 8:18 pm

BlakeNZ wrote:sounds like you got some decent value there. well done. My mate has one (non intercooled) with similar km to yours, and with a 3" down pipe and exhaust, at 10psi boost it is faster than my 2.7 ETI intercooled Mistral at 14-15psi (but with stock exhaust system).
Go for a external trans cooler if you intend any beach work or towing.


Also came with a huge trans cooler already installed :D

Will start a project thread.
Current:
1996 KZN185 Hilux Surf
2008 Mazda2
Boosted_162
Toyspeed Member
 
Posts: 3624
Joined: Sun Sep 04, 2005 1:02 am
Location: Kaukapakapa


Return to Tech Questions

Who is online

Users browsing this forum: Google [Bot] and 8 guests