Toyspeed

For a start... Although it looks like a kick-down cable its not. The shift points are, as you would expect in a ecu controlled car, controlled by the ecu via the tps and map sensor etc. That cable is the AT line pressure control cable; the further the throttle is opened the higher the line pressure ...

Go 1uz


How original... yawn

Put a 1jz-gte in my Hiace van a year or two back (got the motor and trans from a group member) and never grow tired of blowing away 1uz powered utes and vans.... why piss around with a standard 1uz at 190kw odd when the equally standard 1jz-gte has 206 and more ...

gleem wrote:2 od months ago i got towed on a tow rope so thort i couldnt see my mates tyres, at one point over taking a car at 160 kms an hour

Why brag about that? Just makes you and your mate seem stupid and immature.

Torque converter rooted.

Yeah well Nick thats right, if Nob cant break it.. It should be ok.
Anyway long story but it will be the box in MacIvers van if I do it.

Is that right ay? Well my van is an older 93 RZH103, but the gearbox I have to use is out of a 2001 5L diesel Nz new Hiace, Interesting!

Hi guys. Anyone had much to do with standard Hiace boxes behind 1UZs or JZ motors?
I have had a 2JZGE (auto) and now a 1JZGTE (auto) in my one for some time now. At the times of these conversions the parts required to keep the van manual were very dear (bellhousings, flywheels, etc) but now they ...

m


"Van drivers, Courier Drivers and builders alike save up to 20% on your fuel bill while increasing your horsepower by up to 20%. Introducing the Mogan Beast Air Scoop system for Hiace Vans. This system has been tested and proved to save up to 20% on your fuel bill and increase your horsepower ...

Sorry, you're right. It did seem a little harsh, it was only meant as light hearted humour. Sorry STRX7! Actually the more I study that pic the more it does look like an 8, it does look like a rocker cover on the other side. CF bedford motors were overhead cam with the dizzy on the front. They had a ...

strx7 wrote:the gearbox looks like a shortshaft Turbo 350 or there abouts.


the engine is some kind of holden v8

And you sell car parts????????

I agree with the noisy old shitters causing all the trouble issue.. Here in Palmy there is a penis down the end of my cul de sac with a shitbox red KE70. He makes himself look like a homo as he has big 17in mags on the back and standard 13in steelieson the front(who does that???) but the problem is ...

Hi all.. Any Hiace experts here know if the crossmembers in a petrol Hiace (RZH***) are the same as a diesel one of the same era? (LH***) thanks in advance, Chris.

Thats more like it!!! Was thinking not going to bother going down for some skids when you cant even swing around....!

35 square metres???

Thats only the size of a double garage! Are you sure its only that big? Thats only 5 metres wide by 7 metres long.

Cheers thanks for the tip. Ill pretty much use whatever one of the two I find first.

Around 2900 - 3000. bit high for a six. 2300-2400 would be good.

Yes thats the one mate. Its auto and with the 4.3 its got good pick up and ideal for the towing its going to do, but its revving a tad high at 100k. Either a 3.9 or 3.7 would be ideal prob the 3.9 as its still going to be doing heavy towing as opposed to high speed cruising.

Ok thanks for that, I currently have a 4.3 and need to find a 3.9.

Higher ratio... not lower!!!!!!

Does anyone know the highest diff ratio you can get factory in either a Hilux or Hiace diff head? anything higher than 4.3 to 1??